[lm-sensors] support for Asus K8N-DL

[lm-sensors] support for Asus K8N-DL

[Dave Shiels]

This is the Nvidia Crush chip output from lspci -v
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
        Subsystem: ASUSTeK Computer Inc.: Unknown device 8162
        Flags: 66Mhz, fast devsel, IRQ 5
        I/O ports at fc00 [size2]
        I/O ports at 1c00 [sized]
        I/O ports at 1c40 [sized]
        Capabilities: [44] Power Management version 2

I suspect the nforce4 will not works here.

[lm-sensors] support for Asus K8N-DL

[Rudolf Marek]

Dave Shiels wrote:
> This is the Nvidia Crush chip output from lspci -v
> 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
>         Subsystem: ASUSTeK Computer Inc.: Unknown device 8162
>         Flags: 66Mhz, fast devsel, IRQ 5
>         I/O ports at fc00 [size2]
>         I/O ports at 1c00 [sized]
>         I/O ports at 1c40 [sized]
>         Capabilities: [44] Power Management version 2


Hello,

What kernel are you using? (uname -a)

Did you run sensors-detect script?

If so, nvidia smbus was not detected? (or driver was not working?)
Please send us output of lspci -n

If you have nforce4 you can try following patch:
http://khali.linux-fr.org/devel/i2c/linux-2.6/i2c-nforce2-support-nforce4-mcp04.patch

If sensors-detect fail to find the chip W83792D (you must use lm-sensors version 2.9.2)
then you will need to upgrade the BIOS.

If any problems, contact us please,

regards,
Rudolf