* Re: Fw: Bug in saa7134/tuner (Pinnacle MediaCenter 300i)
[not found] ` <1139530309.6629.1.camel@localhost>
@ 2006-02-10 11:03 ` Christian Roessner
0 siblings, 0 replies; only message in thread
From: Christian Roessner @ 2006-02-10 11:03 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Johannes Stezenbach, Andrew Morton, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 41029 bytes --]
Hi,
while searching for more information on this bug, I found this in my
/var/log/syslog. Maybe it has something to do with the problems I have.
Feb 9 18:41:37 amd64 udevd-event[14337]: wait_for_sysfs: waiting for
'/sys/devices/pci0000:00/0000:00:0e.0/0000:02:0a.0/i2c-2/2-0047/bus' failed
lspci matches on this:
02:0a.0 Multimedia controller: Philips Semiconductors SAA7134 Video
Broadcast Decoder (rev 01)
I let the old mail text appended (tell me please, if to throw it away in
possible future replies)
Regards
Christian
Mauro Carvalho Chehab schrieb:
> Christian,
>
> May you try this patch?
>
> Cheers,
> Mauro.
>
> Em Qui, 2006-02-09 às 15:23 -0800, Andrew Morton escreveu:
>> Begin forwarded message:
>>
>> Date: Thu, 09 Feb 2006 12:00:01 +0100
>> From: Christian Roessner <christian@roessner-net.com>
>> To: linux-kernel@vger.kernel.org
>> Subject: Bug in saa7134/tuner (Pinnacle MediaCenter 300i)
>>
>>
>> Hello,
>>
>> [1.] One line summary of the problem:
>> saa7134 and tuner modules / Problem with Pinnacle MediaCenter 300i
>>
>>
>> [2.] Full description of the problem/report:
>> After starting the computer, I do a modprobe saa7134.
>>
>> These are the options from /etc/modprobe.conf:
>> options tuner no_autodetect=33
>> options saa7134 card=50 tuner=33
>>
>> (Autodetection for card= works, but I set it anyways. Tuner
>> autodetection seems to be broken)
>>
>> dmesg output:
>>
>> Linux video capture interface: v1.00
>> saa7130/34: v4l2 driver version 0.2.14 loaded
>> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
>> ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKA] -> GSI 19 (level,
>> low) -> IRQ 17
>> saa7134[0]: found at 0000:02:0a.0, rev: 1, irq: 17, latency: 64, mmio:
>> 0xfeaff800
>> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL
>> [card=50,insmod option]
>> saa7134[0]: board init: gpio is c806000
>> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
>> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
>> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 27 36 95 ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 70: 00 30 8d 18 cc d8 ff ff f4 b8 ff ff ff ff ff ff
>> tuner 2-0043: chip found @ 0x86 (saa7134[0])
>> tuner 2-0043: microtune: companycode=e0e0 part=e0 rev=e0
>> tuner 2-0043: microtune unknown found, not (yet?) supported, sorry :-/
>> saa7134[0]/irq[10,4297703459]: r=0x20 s=0x00 PE
>> saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>> saa7134[0]: registered device video0 [v4l2]
>> saa7134[0]: registered device vbi0
>>
>> As you can see, the tuner does not work. I do a rmmod tuner and a rmmod
>> saa7134 and do a modprobe saa7134 again:
>>
>> dmesg output:
>>
>> saa7130/34: v4l2 driver version 0.2.14 loaded
>> ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKA] -> GSI 19 (level,
>> low) -> IRQ 17
>> saa7134[0]: found at 0000:02:0a.0, rev: 1, irq: 17, latency: 64, mmio:
>> 0xfeaff800
>> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL
>> [card=50,insmod option]
>> saa7134[0]: board init: gpio is c806000
>> tda9887 2-0043: chip found @ 0x86 (saa7134[0])
>> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
>> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
>> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 27 36 95 ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 70: 00 30 8d 18 cc d8 ff ff f4 b8 ff ff ff ff ff ff
>> tuner 2-0060: chip found @ 0xc0 (saa7134[0])
>> tuner 2-0060: microtune: companycode=3cbf part=42 rev=83
>> tuner 2-0060: microtune MT2050 found, OK
>> saa7134[0]/irq[10,4298210983]: r=0x20 s=0x00 PE
>> saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>> saa7134[0]: registered device video0 [v4l2]
>> saa7134[0]: registered device vbi0
>>
>> After that the card is working.
>>
>> So something goes wrong with detection. One funny thing: If repeating
>> steps from above, the rev= line changes: See:
>>
>> tuner 2-0060: microtune: companycode=3cbf part=42 rev=88
>>
>>
>> [3.] Keywords (i.e., modules, networking, kernel):
>>
>> saa7134; Multimedia
>>
>>
>> [4.] Kernel version (from /proc/version):
>>
>> Linux version 2.6.15-suspend2-r5 (root@amd64) (gcc-Version 4.0.2 (Gentoo
>> 4.0.2-r3, pie-8.7.8)) #5 PREEMPT Wed Feb 8 17:59:21 CET 2006
>>
>> Same with vanilla-sources (2.6.15.3) and 2.6.16_rc2-git
>>
>>
>> [5.] Most recent kernel version which did not have the bug:
>>
>> I am not sure, but I think it was version 2.6.14.x
>>
>>
>> [6.] Output of Oops.. message (if applicable) with symbolic information
>> resolved (see Documentation/oops-tracing.txt)
>>
>> No Oopses
>>
>>
>> [7.] A small shell script or example program which triggers the
>> problem (if possible)
>>
>> Only the modprobe/rmmod stuff from above
>>
>>
>> [8.] Environment
>>
>> Gentoo Base System version 1.12.0_pre15
>> Portage 2.1_pre4-r1 (default-linux/amd64/2005.1, gcc-4.0.2,
>> glibc-2.3.6-r2, 2.6.15-suspend2-r5 x86_64)
>> =================================================================
>> System uname: 2.6.15-suspend2-r5 x86_64 AMD Athlon(tm) 64 Processor 3200+
>> ccache version 2.4 [enabled]
>> dev-lang/python: 2.4.2-r1
>> sys-apps/sandbox: 1.2.17
>> sys-devel/autoconf: 2.13, 2.59-r7
>> sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
>> sys-devel/binutils: 2.16.1-r1
>> sys-devel/libtool: 1.5.22
>> virtual/os-headers: 2.6.11-r3
>> ACCEPT_KEYWORDS="amd64 ~amd64"
>> ACCEPT_LICENSE=""
>> ALSA_CARDS="intel8x0 emu10k1"
>> ANT_HOME="/usr/share/ant-core"
>> ARCH="amd64"
>> AUTOCLEAN="yes"
>> BASH_ENV="/etc/spork/is/not/valid/profile.env"
>> CBUILD="x86_64-pc-linux-gnu"
>> CCACHE_SIZE="5G"
>> CDEFINE_amd64="__x86_64__"
>> CDEFINE_x86="__i386__"
>> CFLAGS="-O2 -march=athlon64 -pipe"
>> CFLAGS_x86="-m32 -L/emul/linux/x86/lib -L/emul/linux/x86/usr/lib"
>> CHOST="x86_64-pc-linux-gnu"
>> CHOST_amd64="x86_64-pc-linux-gnu"
>> CHOST_x86="i686-pc-linux-gnu"
>> CLASSPATH="."
>> CLEAN_DELAY="5"
>> CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config
>> /usr/share/X11/xkb /usr/share/config /var/bind /var/qmail/control"
>> CONFIG_PROTECT_MASK="/etc/gconf /etc/splash /etc/terminfo
>> /etc/texmf/web2c /etc/env.d"
>> CVS_RSH="ssh"
>> CXXFLAGS="-O2 -march=athlon64 -pipe"
>> DCCC_PATH="/usr/lib/distcc/bin"
>> DEFAULT_ABI="amd64"
>> DISPLAY=":0.0"
>> DISTCC_LOG=""
>> DISTCC_VERBOSE="0"
>> DISTDIR="/usr/portage/distfiles"
>> EDITOR="/usr/bin/vim"
>> ELIBC="glibc"
>> EMERGE_WARNING_DELAY="10"
>> FEATURES="autoconfig ccache digest distlocks prelink sandbox sfperms strict"
>> FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp --no-check-certificate
>> ${URI} -P ${DISTDIR}"
>> FLTK_DOCDIR="/usr/share/doc/fltk-1.1.7/html"
>> FRITZCAPI_CARDS="fcusb2"
>> GCC_SPECS=""
>> GDK_USE_XFT="1"
>> GDM_LANG="de_DE.utf8"
>> GENTOO_MIRRORS="http://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/
>> ftp://gentoo.inode.at/source/ ftp://ftp.easynet.nl/mirror/gentoo/
>> ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo"
>> GUILE_LOAD_PATH="/usr/share/guile/1.6"
>> G_BROKEN_FILENAMES="1"
>> HISTCONTROL="ignoredups:erasedups"
>> HOME="/root"
>> HOSTNAME="amd64"
>> INFOPATH="/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.16.1/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.0.2/info"
>> INPUT_DEVICES="evdev keyboard mouse "
>> JAVAC="/opt/blackdown-jdk-1.4.2.03/bin/javac"
>> JAVA_HOME="/opt/blackdown-jdk-1.4.2.03"
>> JDK_HOME="/opt/blackdown-jdk-1.4.2.03"
>> KERNEL="linux"
>> LADSPA_PATH="/usr/lib64/ladspa"
>> LANG="de_DE.utf8"
>> LC_ALL="de_DE.utf8"
>> LDFLAGS_x86="-m elf_i386 -L/emul/linux/x86/lib -L/emul/linux/x86/usr/lib"
>> LESS="-R -M --shift 5"
>> LESSCHARSET="utf-8"
>> LESSOPEN="|lesspipe.sh %s"
>> LIBDIR_amd64="lib64"
>> LIBDIR_x86="lib32"
>> LINGUAS="de"
>> LOGNAME="root"
>> LS_COLORS="no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:su=37;41:sg=30;43:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.qt=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.pdf=00;32:*.ps=00;32:*.txt=00;32:*.patch=00;32:*.diff=00;32:*.log=00;32:*.tex=00;32:*.doc=00;32:*.flac=01;35:*.mp3=01;3
5:*
>> .mpc=00;36:*.ogg=00;36:*.wav=00;36:*.mid=00;36:*.midi=00;36:*.au=00;36:*.flac=00;36:*.aac=00;36:"
>> MAKEOPTS="-j3"
>> MANPATH="/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.16.1/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.0.2/man::/opt/blackdown-jdk-1.4.2.03/man"
>> MULTILIB_ABIS="x86 amd64"
>> MULTILIB_STRICT_DENY="64-bit.*shared object"
>> MULTILIB_STRICT_DIRS="/lib /usr/lib /usr/kde/*/lib /usr/qt/*/lib
>> /usr/X11R6/lib"
>> MULTILIB_STRICT_EXEMPT="(perl5|gcc|gcc-lib|eclipse-3|debug|portage)"
>> OPENGL_PROFILE="nvidia"
>> PAGER="/usr/bin/less"
>> PATH="/root/bin:/usr/lib/ccache/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.0.2:/opt/Acrobat7:/opt/blackdown-jdk-1.4.2.03/bin:/opt/blackdown-jdk-1.4.2.03/jre/bin"
>> PKGDIR="/usr/portage/packages"
>> PORTAGE_ARCHLIST="ppc s390 amd64 ppc64 m68k arm sparc sh mips ia64 alpha
>> ppc-macos hppa x86"
>> PORTAGE_BINHOST_CHUNKSIZE="3000"
>> PORTAGE_CALLER="emerge"
>> PORTAGE_ELOG_CLASSES="info warn error log"
>> PORTAGE_ELOG_MAILURI="root@localhost localhost"
>> PORTAGE_ELOG_SYSTEM="save mail"
>> PORTAGE_GID="250"
>> PORTAGE_MASTER_PID="15131"
>> PORTAGE_TMPDIR="/var/tmp"
>> PORTAGE_TMPFS="/dev/shm"
>> PORTDIR="/usr/portage"
>> PORTDIR_OVERLAY="/usr/local/overlays/portage"
>> PRELINK_PATH=""
>> PRELINK_PATH_MASK="/usr/lib/gstreamer-0.8:/lib/modules:/usr/lib64/locale:/usr/lib64/wine:/usr/lib64/valgrind:*.la:*.png:*.py:*.pl:*.pm:*.sh:*.xml:*.xslt:*.a:*.js:/usr/lib/klibc"
>> PWD="/root"
>> PYTHONDOCS="/usr/share/doc/python-docs-2.4.2/html"
>> PYTHONPATH="/usr/lib/portage/pym"
>> QTDIR="/emul/linux/x86/usr/qt/2:/emul/linux/x86/usr/qt/3"
>> RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp
>> --no-check-certificate ${URI} -P ${DISTDIR}"
>> RPMDIR="/usr/portage/rpm"
>> RSYNC_RETRIES="3"
>> RSYNC_TIMEOUT="180"
>> SANE_CONFIG_DIR="/etc/sane.d"
>> SHELL="/bin/bash"
>> SHLVL="1"
>> SYMLINK_LIB="yes"
>> SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
>> TERM="xterm"
>> USE="amd64 X X509 a52 aac aalib acl acpi acpi4linux activefilter alsa
>> apache2 avi bash-completion bcmath berkdb bigger-fonts bitmap-fonts
>> bluetooth browserplugin bzip2 bzlib cairo caps cddb cdparanoia cdr
>> chroot client codecs crypt cscope css ctype cups dbm dbus dga dhcp
>> directfb dlloader doc dri dts dvd dvdr dvdread dxr3 eds emboss encode
>> esd exif expat extensions faac faad fame fax faxonly fbcon fbsplash
>> ffmpeg firefox flac font-server foomaticdb freetype fuse gd gdbm gif
>> gimp gimpprint glitz glut gmp gnome gphoto2 gpm gstreamer gtk gtk2
>> gtkhtml guile hal hbci howl icq icu idn imagemagick imap imlib ipv6
>> javascript jbig jpeg jpeg2k lcd lcms ldap libcaca libclamav lirc
>> lm_sensors logrotate lzo lzw lzw-tiff mad maildir mailwrapper mbox mcal
>> md5sum mikmod mime mjpeg mng
>> motif mp3 mpeg mpeg4 mppe-mppc mysql nautilus ncurses network nls
>> no-old-linux nptl nptlonly nsplugin ntfs nvidia ogg oggvorbis opengl oss
>> pam password pcntl pdflib perl php pic png pnp posix postgres ppds
>> python quicktime readline rtc ruby samba scanner sdl session sftplogging
>> slang snmp sockets sox speex spell sqlite ssl subversion svg symlink
>> tcltk tcpd tetex theora threads tiff tokenizer truetype truetype-fonts
>> type1-fonts udev unicode usb userlocales vcd vim-with-x vorbis wma wmf
>> wxwindows xine xml2 xmms xpm xprint xrandr xscreensaver xsl xv xvid zlib
>> elibc_glibc fritzcapi_cards_fcusb2 input_devices_evdev
>> input_devices_keyboard input_devices_mouse kernel_linux linguas_de
>> userland_GNU video_cards_apm video_cards_v4l video_cards_nvidia
>> video_cards_nv"
>> USER="root"
>> USERLAND="GNU"
>> USE_EXPAND="DVB_CARDS ELIBC FCDSL_CARDS FRITZCAPI_CARDS INPUT_DEVICES
>> KERNEL LINGUAS USERLAND VIDEO_CARDS"
>> USE_EXPAND_HIDDEN=""
>> USE_ORDER="env:pkg:conf:defaults"
>> VIDEO_CARDS="apm v4l nvidia nv"
>> XARGS="xargs -r"
>> XAUTHORITY="/root/.xauthVRSTJs"
>> _="/usr/bin/emerge"
>>
>>
>> [8.1.] Software (add the output of the ver_linux script here)
>>
>> If some fields are empty or look unusual you may have an old version.
>> Compare to the current minimal requirements in Documentation/Changes.
>>
>> Linux amd64 2.6.15-suspend2-r5 #5 PREEMPT Wed Feb 8 17:59:21 CET 2006
>> x86_64 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux
>>
>> Gnu C 4.0.2
>> Gnu make 3.80
>> binutils 2.16.1
>> util-linux 2.12r
>> mount 2.12r
>> module-init-tools 3.2.2
>> e2fsprogs 1.38
>> reiserfsprogs line
>> reiser4progs line
>> PPP 2.4.3
>> nfs-utils 1.0.7
>> Linux C Library 2.3.6
>> Dynamic linker (ldd) 2.3.6
>> Procps 3.2.6
>> Net-tools 1.60
>> Kbd 1.12
>> Sh-utils 5.93
>> udev 084
>> Modules Loaded tuner saa7134 tda9887 video_buf v4l2_common
>> v4l1_compat ir_kbd_i2c ir_common videodev snd_seq_midi snd_emu10k1_synth
>> snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_seq_oss
>> snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss b1pci b1dma b1 capi
>> capifs kernelcapi snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus
>> snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep
>> snd soundcore 8250_pnp 8250 serial_core forcedeth 8139too mii nvidia eth1394
>>
>>
>> [8.2.] Processor information (from /proc/cpuinfo):
>>
>> processor : 0
>> vendor_id : AuthenticAMD
>> cpu family : 15
>> model : 4
>> model name : AMD Athlon(tm) 64 Processor 3200+
>> stepping : 8
>> cpu MHz : 803.924
>> cache size : 1024 KB
>> fpu : yes
>> fpu_exception : yes
>> cpuid level : 1
>> wp : yes
>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
>> mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
>> 3dnowext 3dnow
>> bogomips : 1608.88
>> TLB size : 1024 4K pages
>> clflush size : 64
>> cache_alignment : 64
>> address sizes : 40 bits physical, 48 bits virtual
>> power management: ts fid vid ttp
>>
>>
>> [8.3.] Module information (from /proc/modules):
>>
>> tuner 39396 0 - Live 0xffffffff885e0000
>> saa7134 114216 0 - Live 0xffffffff885c3000
>> tda9887 14800 0 - Live 0xffffffff885eb000
>> video_buf 18244 1 saa7134, Live 0xffffffff885bd000
>> v4l2_common 6400 1 saa7134, Live 0xffffffff885ba000
>> v4l1_compat 11140 1 saa7134, Live 0xffffffff885b6000
>> ir_kbd_i2c 7436 1 saa7134, Live 0xffffffff885b3000
>> ir_common 8708 2 saa7134,ir_kbd_i2c, Live 0xffffffff885af000
>> videodev 9280 1 saa7134, Live 0xffffffff885ab000
>> snd_seq_midi 6976 0 - Live 0xffffffff885a8000
>> snd_emu10k1_synth 6656 0 - Live 0xffffffff885a5000
>> snd_emux_synth 33920 1 snd_emu10k1_synth, Live 0xffffffff8859b000
>> snd_seq_virmidi 6144 1 snd_emux_synth, Live 0xffffffff88598000
>> snd_seq_midi_emul 5696 1 snd_emux_synth, Live 0xffffffff88595000
>> snd_seq_oss 30948 0 - Live 0xffffffff8858c000
>> snd_seq_midi_event 6656 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss, Live
>> 0xffffffff88589000
>> snd_seq 49240 8
>> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event,
>> Live 0xffffffff8857b000
>> snd_pcm_oss 39008 0 - Live 0xffffffff88570000
>> snd_mixer_oss 15232 1 snd_pcm_oss, Live 0xffffffff8856b000
>> b1pci 7360 1 - Live 0xffffffff88566000
>> b1dma 13636 1 b1pci, Live 0xffffffff88561000
>> b1 22784 2 b1pci,b1dma, Live 0xffffffff8855a000
>> capi 14640 4 - Live 0xffffffff88555000
>> capifs 4752 2 capi, Live 0xffffffff88552000
>> kernelcapi 46112 4 b1pci,b1dma,b1,capi, Live 0xffffffff88545000
>> snd_emu10k1 112196 2 snd_emu10k1_synth, Live 0xffffffff88528000
>> snd_rawmidi 21920 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1, Live
>> 0xffffffff88521000
>> snd_ac97_codec 98428 1 snd_emu10k1, Live 0xffffffff88507000
>> snd_ac97_bus 2432 1 snd_ac97_codec, Live 0xffffffff88505000
>> snd_pcm 81932 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec, Live
>> 0xffffffff884ef000
>> snd_seq_device 7824 7
>> snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,
>> Live 0xffffffff884ec000
>> snd_timer 21256 3 snd_seq,snd_emu10k1,snd_pcm, Live 0xffffffff884e5000
>> snd_page_alloc 8400 2 snd_emu10k1,snd_pcm, Live 0xffffffff884e1000
>> snd_util_mem 3840 2 snd_emux_synth,snd_emu10k1, Live 0xffffffff884df000
>> snd_hwdep 8392 2 snd_emux_synth,snd_emu10k1, Live 0xffffffff884db000
>> snd 53184 15
>> snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep,
>> Live 0xffffffff884cd000
>> soundcore 8480 1 snd, Live 0xffffffff884c9000
>> 8250_pnp 10496 0 - Live 0xffffffff884c5000
>> 8250 20992 1 8250_pnp, Live 0xffffffff884be000
>> serial_core 18176 1 8250, Live 0xffffffff884b8000
>> forcedeth 21956 0 - Live 0xffffffff884b1000
>> 8139too 22976 0 - Live 0xffffffff884aa000
>> mii 4928 1 8139too, Live 0xffffffff884a7000
>> nvidia 4847316 12 - Live 0xffffffff88006000
>> eth1394 17936 0 - Live 0xffffffff88000000
>>
>>
>> [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
>>
>> 0000-001f : dma1
>> 0020-0021 : pic1
>> 0040-0043 : timer0
>> 0050-0053 : timer1
>> 0060-006f : keyboard
>> 0070-0077 : rtc
>> 0080-008f : dma page reg
>> 00a0-00a1 : pic2
>> 00c0-00df : dma2
>> 00f0-00ff : fpu
>> 0170-0177 : ide1
>> 01f0-01f7 : ide0
>> 02f8-02ff : serial
>> 0376-0376 : ide1
>> 0378-037a : parport0
>> 03c0-03df : vesafb
>> 03f6-03f6 : ide0
>> 03f8-03ff : serial
>> 0480-0487 : pnp 00:08
>> 0810-0815 : ACPI CPU throttle
>> 0970-0977 : 0000:00:0a.0
>> 0970-0977 : sata_nv
>> 09f0-09f7 : 0000:00:0a.0
>> 09f0-09f7 : sata_nv
>> 0b70-0b73 : 0000:00:0a.0
>> 0b70-0b73 : sata_nv
>> 0bf0-0bf3 : 0000:00:0a.0
>> 0bf0-0bf3 : sata_nv
>> 0cf8-0cff : PCI conf1
>> 0d00-0d07 : pnp 00:08
>> 0d00-0d07 : it87-isa
>> 4000-4003 : PM1a_EVT_BLK
>> 4004-4005 : PM1a_CNT_BLK
>> 4008-400b : PM_TMR
>> 401c-401c : PM2_CNT_BLK
>> 4020-4027 : GPE0_BLK
>> 5000-503f : 0000:00:01.1
>> 5000-5007 : nForce2_smbus
>> 5040-507f : 0000:00:01.1
>> 5040-5047 : nForce2_smbus
>> 5080-509f : 0000:00:01.1
>> b000-cfff : PCI Bus #02
>> b800-b87f : 0000:02:0b.0
>> bc00-bc1f : 0000:02:09.0
>> bc00-bc1e : b1pci-bc00
>> c000-c03f : 0000:02:09.0
>> c400-c41f : 0000:02:08.0
>> c400-c41f : EMU10K1
>> c800-c8ff : 0000:02:07.0
>> c800-c8ff : 8139too
>> cc00-cc07 : 0000:02:08.1
>> d000-d07f : 0000:00:0a.0
>> d000-d07f : sata_nv
>> d400-d40f : 0000:00:0a.0
>> d400-d40f : sata_nv
>> ec00-ec07 : 0000:00:05.0
>> ec00-ec07 : forcedeth
>> ffa0-ffaf : 0000:00:08.0
>> ffa0-ffa7 : ide0
>> ffa8-ffaf : ide1
>>
>> 00000000-0009fbff : System RAM
>> 0009fc00-0009ffff : reserved
>> 000a0000-000bffff : Video RAM area
>> 000c0000-000c7fff : Video ROM
>> 000f0000-000fffff : System ROM
>> 00100000-3ffbffff : System RAM
>> 00100000-003ceeaa : Kernel code
>> 003ceeab-0051962f : Kernel data
>> 3ffc0000-3ffcffff : ACPI Tables
>> 3ffd0000-3fffffff : ACPI Non-volatile Storage
>> 9a800000-ba7fffff : PCI Bus #01
>> a0000000-afffffff : 0000:01:00.0
>> a0000000-afffffff : vesafb
>> c0000000-dfffffff : 0000:00:00.0
>> fa900000-fe9fffff : PCI Bus #01
>> fc000000-fcffffff : 0000:01:00.0
>> fd000000-fdffffff : 0000:01:00.0
>> fd000000-fdffffff : nvidia
>> fe9e0000-fe9fffff : 0000:01:00.0
>> fea00000-feafffff : PCI Bus #02
>> feaff000-feaff7ff : 0000:02:0b.0
>> feaff000-feaff7ff : ohci1394
>> feaff800-feaffbff : 0000:02:0a.0
>> feaff800-feaffbff : saa7134[0]
>> feaffc00-feaffcff : 0000:02:07.0
>> feaffc00-feaffcff : 8139too
>> febfc000-febfcfff : 0000:00:05.0
>> febfc000-febfcfff : forcedeth
>> febfd000-febfdfff : 0000:00:02.0
>> febfd000-febfdfff : ohci_hcd
>> febfe000-febfefff : 0000:00:02.1
>> febfe000-febfefff : ohci_hcd
>> febffc00-febffcff : 0000:00:02.2
>> febffc00-febffcff : ehci_hcd
>> fec00000-fec00fff : reserved
>> fee00000-fee00fff : reserved
>> ff7c0000-ffffffff : reserved
>>
>>
>> [8.5.] PCI information ('lspci -vvv' as root)
>>
>> 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Region 0: Memory at c0000000 (32-bit, prefetchable) [size=512M]
>> Capabilities: [44] HyperTransport: Slave or Primary Interface
>> Command: BaseUnitID=0 UnitCnt=14 MastHost- DefDir- DUL-
>> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
>> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut-
>> LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>> Revision ID: 1.03
>> Link Frequency 0: 800MHz
>> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+
>> 500MHz+ 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>> Link Frequency 1: 200MHz
>> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz-
>> 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE-
>> CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>> Prefetchable memory behind bridge Upper: 00-00
>> Bus Number: 00
>> Capabilities: [c0] AGP version 3.0
>> Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64-
>> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+
>> Rate=x8
>>
>> 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>>
>> 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management
>> (rev a1)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Interrupt: pin A routed to IRQ 0
>> Region 0: I/O ports at 5080 [size=32]
>> Region 4: I/O ports at 5000 [size=64]
>> Region 5: I/O ports at 5040 [size=64]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
>> (prog-if 10 [OHCI])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 19
>> Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
>> (prog-if 10 [OHCI])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin B routed to IRQ 16
>> Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0
>> Controller (rev a2) (prog-if 20 [EHCI])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin C routed to IRQ 18
>> Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [44] Debug port
>> Capabilities: [80] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 80a7
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (250ns min, 5000ns max)
>> Interrupt: pin A routed to IRQ 18
>> Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
>> Region 1: I/O ports at ec00 [size=8]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller
>> (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Region 4: I/O ports at ffa0 [size=16]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller
>> (v2.5) (rev a2) (prog-if 85 [Master SecO PriO])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 16
>> Region 0: I/O ports at 09f0 [size=8]
>> Region 1: I/O ports at 0bf0 [size=4]
>> Region 2: I/O ports at 0970 [size=8]
>> Region 3: I/O ports at 0b70 [size=4]
>> Region 4: I/O ports at d400 [size=16]
>> Region 5: I/O ports at d000 [size=128]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI
>> Bridge (rev a2) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 16
>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: fa900000-fe9fffff
>> Prefetchable memory behind bridge: 9a800000-ba7fffff
>> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>>
>> 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge
>> (rev a2) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR+ <PERR-
>> Latency: 0
>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
>> I/O behind bridge: 0000b000-0000cfff
>> Memory behind bridge: fea00000-feafffff
>> Prefetchable memory behind bridge: fff00000-000fffff
>> Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR+
>> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>>
>> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>> HyperTransport Technology Configuration
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Capabilities: [80] HyperTransport: Host or Secondary Interface
>> !!! Possibly incomplete decoding
>> Command: WarmRst+ DblEnd-
>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0
>> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>> Revision ID: 1.02
>>
>> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>> Address Map
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>>
>> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>> DRAM Controller
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>>
>> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>> Miscellaneous Control
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>>
>> 01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800
>> GT] (rev a1) (prog-if 00 [VGA])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 248 (1250ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 20
>> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>> Region 1: Memory at a0000000 (32-bit, prefetchable) [size=256M]
>> Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
>> [virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
>> Capabilities: [60] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [44] AGP version 3.0
>> Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64-
>> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>> Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit-
>> FW+ Rate=x8
>>
>> 02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> RTL-8139/8139C/8139C+ (rev 10)
>> Subsystem: Realtek Semiconductor Co., Ltd. RT8139
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64 (8000ns min, 16000ns max)
>> Interrupt: pin A routed to IRQ 17
>> Region 0: I/O ports at c800 [size=256]
>> Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>> PME(D0-,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 02:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
>> Subsystem: Creative Labs SBLive! 5.1 Model SB0100
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64 (500ns min, 5000ns max)
>> Interrupt: pin A routed to IRQ 21
>> Region 0: I/O ports at c400 [size=32]
>> Capabilities: [dc] Power Management version 1
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 02:08.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
>> (rev 07)
>> Subsystem: Creative Labs Gameport Joystick
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64
>> Region 0: I/O ports at cc00 [size=8]
>> Capabilities: [dc] Power Management version 1
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 02:09.0 Network controller: AVM Audiovisuelles MKTG & Computer System
>> GmbH B1 ISDN
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64
>> Interrupt: pin A routed to IRQ 22
>> Region 0: I/O ports at c000 [size=64]
>> Region 1: I/O ports at bc00 [size=32]
>>
>> 02:0a.0 Multimedia controller: Philips Semiconductors SAA7134 Video
>> Broadcast Decoder (rev 01)
>> Subsystem: Pinnacle Systems Inc. Pinnacle PCTV 300i DVB-T + PAL
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR+
>> Latency: 64 (62000ns min, 62000ns max)
>> Interrupt: pin A routed to IRQ 17
>> Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K]
>> Capabilities: [40] Power Management version 1
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>>
>> 02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
>> Controller (rev 80) (prog-if 10 [OHCI])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 808a
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR+
>> Latency: 64 (8000ns max), Cache Line Size 08
>> Interrupt: pin A routed to IRQ 17
>> Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K]
>> Region 1: I/O ports at b800 [size=128]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>>
>> [8.6.] SCSI information (from /proc/scsi/scsi)
>>
>> Attached devices:
>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
>> Type: Direct-Access ANSI SCSI revision: 05
>>
>>
>> [8.7.] Other information that might be relevant to the problem
>> (please look in /proc and include all information that you
>> think to be relevant):
>>
>> Nothing more ;-)
>>
>>
>> [X.] Other notes, patches, fixes, workarounds:
>>
>> The rmmod/modprobe fun from above is a very, very bad workaround.
>>
>> Thanks in advance
>>
>> Christian
>>
>>
> Cheers,
> Mauro.
>
>
> ------------------------------------------------------------------------
>
> --- saa7134-cards.c.orig 2006-02-08 17:58:46.000000000 +0100
> +++ saa7134-cards.c 2006-02-08 18:39:04.000000000 +0100
> @@ -979,7 +979,7 @@
> .radio_type = UNSET,
> .tuner_addr = ADDR_UNSET,
> .radio_addr = ADDR_UNSET,
> - .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
> + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
> .inputs = {{
> .name = name_tv,
> .vmux = 3,
> @@ -1668,7 +1668,7 @@
> .radio_type = UNSET,
> .tuner_addr = ADDR_UNSET,
> .radio_addr = ADDR_UNSET,
> - .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
> + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
> .mpeg = SAA7134_MPEG_DVB,
> .inputs = {{
> .name = name_tv,
--
Tel.: 0641-2097252, Mobil: 0171-3611230
PGP: http://www.roessner-net.com/0x6B929997.asc
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 252 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-02-10 11:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20060209152324.58b1ab78.akpm@osdl.org>
[not found] ` <1139530309.6629.1.camel@localhost>
2006-02-10 11:03 ` Fw: Bug in saa7134/tuner (Pinnacle MediaCenter 300i) Christian Roessner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.