Virtex-4 TEMAC device driver available?

Virtex-4 TEMAC device driver available?

[S. Egbert]

Dear Kashiwagi-San,

I noticed in your posting over at linuxppc-embedded in Jan 2006 about a
Xilinx demo code for the TEMAC driver.

So, I pulled the
http://www.xilinx.co.jp/ise/embedded/EDK/71i/mpmc_7_1_2.zip file and
browsed it.

Do you know where one can get a patch for Linux 2.4?

Thank you,

Steve Egbert

-- 
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GAT d- s++: !a C+++ UL++++ P+++ L+++ E W+++ N+ o++ K+++ w--
O- M+ V- PS PE++ Y+ PGP++ t++ 5++ X++ R tv- b++ DI+ D+
G++ e* h++ r+++ z
------END GEEK CODE BLOCK------
GPG Public Key: http://www.egbert.net/pgp

Re: Virtex-4 TEMAC device driver available?

[Yoshio Kashiwagi]

Hello Steve San,

Strictly, GSRD differs from TEMAC.
Although both are embedded TEMAC is used in Virtex4, GSRD accesses
direct memory through MPMC. MPMC is a multi-port memory controller
for GSRD to access direct memory. 

http://www.xilinx.com/esp/wired/optical/xlnx_net/gsrd_download.htm

Download of GSRD is linked out of the above-mentioned URL, and
becomes a place to be logged in (Registration for downloading the
reference design short cut).
http://www.xilinx.com/xlnx/xil_entry2.jsp?sMode=login&group=gsrd

Linux2.4 driver is contained in this GSRD. However, this Linux2.4
driver (adapter.c) has the fault which does not operate correctly,
when a 100BASE hub is connected. In order to correct this problem,
it is necessary to add the interrupt handling routine of PHY.
Although this GSRD is a reference design more nearly high-speed
than TEMAC, many FPGA resources are used for it.

I am going to create a TEMAC driver (Linux2.6) by a scratch, I
cannot make time for it now. Since it is due to make by the end of
this month, if it is completed, I'll announce it to this mailing
list.

I'll write the Linux2.6 TEMAC driver corresponding to the following
reference designs. 
http://direct.xilinx.com/bvdocs/appnotes/xapp902.pdf
http://www.xilinx.com/bvdocs/appnotes/xapp902.zip
(The Linux driver is not contained in this reference design)

Best Regards,

Yoshio Kashiwagi - Nissin Systems

> Dear Kashiwagi-San,
> 
> I noticed in your posting over at linuxppc-embedded in Jan 2006 about 
a
> Xilinx demo code for the TEMAC driver.
> 
> So, I pulled the
> http://www.xilinx.co.jp/ise/embedded/EDK/71i/mpmc_7_1_2.zip file and
> browsed it.
> 
> Do you know where one can get a patch for Linux 2.4?
> 
> Thank you,
> 
> Steve Egbert
> 
> -- 
> -----BEGIN GEEK CODE BLOCK-----
> Version: 3.12
> GAT d- s++: !a C+++ UL++++ P+++ L+++ E W+++ N+ o++ K+++ w--
> O- M+ V- PS PE++ Y+ PGP++ t++ 5++ X++ R tv- b++ DI+ D+
> G++ e* h++ r+++ z
> ------END GEEK CODE BLOCK------
> GPG Public Key: http://www.egbert.net/pgp
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 

Re: Virtex-4 TEMAC device driver available?

[Yoshio Kashiwagi]

Hello Steve San,

Although I was performing porting for the reference design of
xapp902 shown in the following URL, I have noticed that the
temac circuit of this xapp902 cannot perform control of PHY.
The temac circuit of this xapp902 does not have control of PHY.

http://direct.xilinx.com/bvdocs/appnotes/xapp902.pdf

As a result of consulting with our client, our client newly
creates their original temac based on xapp807 design of the
following URL. It is because the function is insufficient
using Linux in this xapp897 design.

http://www.xilinx.com/bvdocs/appnotes/xapp807.pdf

Since I created the temac driver of their design, the release
of the driver to ML became impossible to me.

Best Regaeds,

Yoshio kashiwagi - Nissin Systems

> Hello Steve San,
> 
> Strictly, GSRD differs from TEMAC.
> Although both are embedded TEMAC is used in Virtex4, GSRD accesses
> direct memory through MPMC. MPMC is a multi-port memory controller
> for GSRD to access direct memory. 
> 
> http://www.xilinx.com/esp/wired/optical/xlnx_net/gsrd_download.htm
> 
> Download of GSRD is linked out of the above-mentioned URL, and
> becomes a place to be logged in (Registration for downloading the
> reference design short cut).
> http://www.xilinx.com/xlnx/xil_entry2.jsp?sMode=login&group=gsrd
> 
> Linux2.4 driver is contained in this GSRD. However, this Linux2.4
> driver (adapter.c) has the fault which does not operate correctly,
> when a 100BASE hub is connected. In order to correct this problem,
> it is necessary to add the interrupt handling routine of PHY.
> Although this GSRD is a reference design more nearly high-speed
> than TEMAC, many FPGA resources are used for it.
> 
> I am going to create a TEMAC driver (Linux2.6) by a scratch, I
> cannot make time for it now. Since it is due to make by the end of
> this month, if it is completed, I'll announce it to this mailing
> list.
> 
> I'll write the Linux2.6 TEMAC driver corresponding to the following
> reference designs. 
> http://direct.xilinx.com/bvdocs/appnotes/xapp902.pdf
> http://www.xilinx.com/bvdocs/appnotes/xapp902.zip
> (The Linux driver is not contained in this reference design)
> 
> Best Regards,
> 
> Yoshio Kashiwagi - Nissin Systems
> 
> > Dear Kashiwagi-San,
> > 
> > I noticed in your posting over at linuxppc-embedded in Jan 2006 
about 
> a
> > Xilinx demo code for the TEMAC driver.
> > 
> > So, I pulled the
> > http://www.xilinx.co.jp/ise/embedded/EDK/71i/mpmc_7_1_2.zip file and
> > browsed it.
> > 
> > Do you know where one can get a patch for Linux 2.4?
> > 
> > Thank you,
> > 
> > Steve Egbert
> > 
> > -- 
> > -----BEGIN GEEK CODE BLOCK-----
> > Version: 3.12
> > GAT d- s++: !a C+++ UL++++ P+++ L+++ E W+++ N+ o++ K+++ w--
> > O- M+ V- PS PE++ Y+ PGP++ t++ 5++ X++ R tv- b++ DI+ D+
> > G++ e* h++ r+++ z
> > ------END GEEK CODE BLOCK------
> > GPG Public Key: http://www.egbert.net/pgp
> > _______________________________________________
> > Linuxppc-embedded mailing list
> > Linuxppc-embedded@ozlabs.org
> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> > 
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 
------------------------------------------------------------
柏木良夫
株式会社日新システムズ 基礎技術部
Linuxプロフェショナルグループ
〒600-8482 京都市下京区堀川通四条下ル東側 堀川四条ビル
TEL 075-344-7950 FAX 075-344-7887
E-Mail kashiwagi@co-nss.co.jp HTTP http://www.co-nss.co.jp/
------------------------------------------------------------

Virtex-4 TEMAC device driver available?

[S. Egbert]

Dear Mr. Lynch,

I noticed your posting on Linux PPC embedded news list in Jan 2006 about
the TEMAC driver for Linux.

So, I pulled a copy of Xilinx driver
(http://www.xilinx.co.jp/ise/embedded/EDK/71i/mpmc_7_1_2.zip) and
browsed it.

Did you have any luck thus far with the Linux 2.4 patch?

Coordially,

Steve
---
Steve Egbert
-- 
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GAT d- s++: !a C+++ UL++++ P+++ L+++ E W+++ N+ o++ K+++ w--
O- M+ V- PS PE++ Y+ PGP++ t++ 5++ X++ R tv- b++ DI+ D+
G++ e* h++ r+++ z
------END GEEK CODE BLOCK------
GPG Public Key: http://www.egbert.net/pgp

Virtex-4 TEMAC device driver available?

[Patrick Huesmann]

Hi,

I'm using linux on several projects running on Virtex2Pro boards
utilizing a softcore MAC ("OPB EMAC"). Recently, we built a new board
based on the Virtex 4 FX and I noticed that its hardwired "TEMAC"
differs significantly from the "OPB EMAC" we used before.

Is there already a linux driver for this TEMAC available? I noticed
that several patches for basic Virtex-4 support have been posted to
this list, but I don't know what kernel these patches are based on, or
where I can download a development snapshot.

Unfortunately, the public rsync repository at source.mvista.com (where
I got the kernel for our Virtex2Pro based stuff from) seems to be
discontinued, and I don't see any PPC specific kernel stuff in the git
repositories there.

Thanks,
Patrick

Re: Virtex-4 TEMAC device driver available?

[Yoshio Kashiwagi]

Hi Patrick-san,

GSRD of the following URL is downloaded and the driver of mvl is
generated by EDK, the Xilinx temac driver and patch for 2.4 will be 
obtained.

http://www.xilinx.co.jp/esp/wired/optical/xlnx_net/gsrd.htm

Now, I'm just working temac driver to 2.6 and have not yet completed.

Best Regards,
Yoshio Kashiwagi - Nissin Systems

> Hi,
> 
> I'm using linux on several projects running on Virtex2Pro boards
> utilizing a softcore MAC ("OPB EMAC"). Recently, we built a new board
> based on the Virtex 4 FX and I noticed that its hardwired "TEMAC"
> differs significantly from the "OPB EMAC" we used before.
> 
> Is there already a linux driver for this TEMAC available? I noticed
> that several patches for basic Virtex-4 support have been posted to
> this list, but I don't know what kernel these patches are based on, or
> where I can download a development snapshot.
> 
> Unfortunately, the public rsync repository at source.mvista.com (where
> I got the kernel for our Virtex2Pro based stuff from) seems to be
> discontinued, and I don't see any PPC specific kernel stuff in the git
> repositories there.
> 
> Thanks,
> Patrick
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 

Re: Virtex-4 TEMAC device driver available?

[David H. Lynch Jr.]

Yoshio Kashiwagi wrote:

>Hi Patrick-san,
>
>GSRD of the following URL is downloaded and the driver of mvl is
>generated by EDK, the Xilinx temac driver and patch for 2.4 will be 
>obtained.
>
>http://www.xilinx.co.jp/esp/wired/optical/xlnx_net/gsrd.htm
>
>Now, I'm just working temac driver to 2.6 and have not yet completed.
>
>Best Regards,
>Yoshio Kashiwagi - Nissin Systems
>  
>
    I could not get at the 2.4 driver at the url above.

    How is the 2.6 driver going ?
    Need any help ?

-- 
Dave Lynch 						DLA Systems
Software Development:  				     Embedded Linux
717.627.3770 	dhlii@dlasys.net 	 http://www.dlasys.net:8888