From: "Heiko Stübner" <heiko@sntech.de>
To: cl@rock-chips.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
kever.yang@rock-chips.com
Subject: Re: [PATCH 09/10] arm64: dts: rockchip: add pwm nodes for rk3568
Date: Tue, 22 Jun 2021 12:36:59 +0200 [thread overview]
Message-ID: <4401172.xlVK0Xs8nM@diego> (raw)
In-Reply-To: <20210622102907.99242-1-heiko@sntech.de>
Am Dienstag, 22. Juni 2021, 12:29:06 CEST schrieb Heiko Stuebner:
> From: Liang Chen <cl@rock-chips.com>
>
> Add the pwm controller nodes to the core rk3568 dtsi.
>
> Signed-off-by: Liang Chen <cl@rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
please ignore the numbering, as they should be
09/10 -> 1/2
10/10 -> 2/2
> ---
> arch/arm64/boot/dts/rockchip/rk3568.dtsi | 176 +++++++++++++++++++++++
> 1 file changed, 176 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> index d225e6a45d5c..33db226b46cb 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -257,6 +257,50 @@ uart0: serial@fdd50000 {
> status = "disabled";
> };
>
> + pwm0: pwm@fdd70000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70000 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm0m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm1: pwm@fdd70010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70010 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm1m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm2: pwm@fdd70020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70020 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm2m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm3: pwm@fdd70030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70030 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm3_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> sdmmc2: mmc@fe000000 {
> compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> reg = <0x0 0xfe000000 0x0 0x4000>;
> @@ -525,6 +569,138 @@ uart9: serial@fe6d0000 {
> status = "disabled";
> };
>
> + pwm4: pwm@fe6e0000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0000 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm4_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm5: pwm@fe6e0010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0010 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm5_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm6: pwm@fe6e0020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0020 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm6_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm7: pwm@fe6e0030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0030 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm7_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm8: pwm@fe6f0000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0000 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm8m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm9: pwm@fe6f0010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0010 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm9m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm10: pwm@fe6f0020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0020 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm10m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm11: pwm@fe6f0030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0030 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm11m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm12: pwm@fe700000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700000 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm12m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm13: pwm@fe700010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700010 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm13m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm14: pwm@fe700020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700020 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm14m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm15: pwm@fe700030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700030 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm15m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> pinctrl: pinctrl {
> compatible = "rockchip,rk3568-pinctrl";
> rockchip,grf = <&grf>;
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: cl@rock-chips.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
kever.yang@rock-chips.com
Subject: Re: [PATCH 09/10] arm64: dts: rockchip: add pwm nodes for rk3568
Date: Tue, 22 Jun 2021 12:36:59 +0200 [thread overview]
Message-ID: <4401172.xlVK0Xs8nM@diego> (raw)
In-Reply-To: <20210622102907.99242-1-heiko@sntech.de>
Am Dienstag, 22. Juni 2021, 12:29:06 CEST schrieb Heiko Stuebner:
> From: Liang Chen <cl@rock-chips.com>
>
> Add the pwm controller nodes to the core rk3568 dtsi.
>
> Signed-off-by: Liang Chen <cl@rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
please ignore the numbering, as they should be
09/10 -> 1/2
10/10 -> 2/2
> ---
> arch/arm64/boot/dts/rockchip/rk3568.dtsi | 176 +++++++++++++++++++++++
> 1 file changed, 176 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> index d225e6a45d5c..33db226b46cb 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -257,6 +257,50 @@ uart0: serial@fdd50000 {
> status = "disabled";
> };
>
> + pwm0: pwm@fdd70000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70000 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm0m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm1: pwm@fdd70010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70010 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm1m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm2: pwm@fdd70020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70020 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm2m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm3: pwm@fdd70030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70030 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm3_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> sdmmc2: mmc@fe000000 {
> compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> reg = <0x0 0xfe000000 0x0 0x4000>;
> @@ -525,6 +569,138 @@ uart9: serial@fe6d0000 {
> status = "disabled";
> };
>
> + pwm4: pwm@fe6e0000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0000 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm4_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm5: pwm@fe6e0010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0010 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm5_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm6: pwm@fe6e0020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0020 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm6_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm7: pwm@fe6e0030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0030 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm7_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm8: pwm@fe6f0000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0000 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm8m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm9: pwm@fe6f0010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0010 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm9m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm10: pwm@fe6f0020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0020 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm10m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm11: pwm@fe6f0030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0030 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm11m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm12: pwm@fe700000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700000 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm12m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm13: pwm@fe700010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700010 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm13m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm14: pwm@fe700020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700020 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm14m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm15: pwm@fe700030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700030 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm15m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> pinctrl: pinctrl {
> compatible = "rockchip,rk3568-pinctrl";
> rockchip,grf = <&grf>;
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: cl@rock-chips.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
kever.yang@rock-chips.com
Subject: Re: [PATCH 09/10] arm64: dts: rockchip: add pwm nodes for rk3568
Date: Tue, 22 Jun 2021 12:36:59 +0200 [thread overview]
Message-ID: <4401172.xlVK0Xs8nM@diego> (raw)
In-Reply-To: <20210622102907.99242-1-heiko@sntech.de>
Am Dienstag, 22. Juni 2021, 12:29:06 CEST schrieb Heiko Stuebner:
> From: Liang Chen <cl@rock-chips.com>
>
> Add the pwm controller nodes to the core rk3568 dtsi.
>
> Signed-off-by: Liang Chen <cl@rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
please ignore the numbering, as they should be
09/10 -> 1/2
10/10 -> 2/2
> ---
> arch/arm64/boot/dts/rockchip/rk3568.dtsi | 176 +++++++++++++++++++++++
> 1 file changed, 176 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> index d225e6a45d5c..33db226b46cb 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -257,6 +257,50 @@ uart0: serial@fdd50000 {
> status = "disabled";
> };
>
> + pwm0: pwm@fdd70000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70000 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm0m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm1: pwm@fdd70010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70010 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm1m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm2: pwm@fdd70020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70020 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm2m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm3: pwm@fdd70030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70030 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm3_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> sdmmc2: mmc@fe000000 {
> compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> reg = <0x0 0xfe000000 0x0 0x4000>;
> @@ -525,6 +569,138 @@ uart9: serial@fe6d0000 {
> status = "disabled";
> };
>
> + pwm4: pwm@fe6e0000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0000 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm4_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm5: pwm@fe6e0010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0010 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm5_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm6: pwm@fe6e0020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0020 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm6_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm7: pwm@fe6e0030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0030 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm7_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm8: pwm@fe6f0000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0000 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm8m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm9: pwm@fe6f0010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0010 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm9m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm10: pwm@fe6f0020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0020 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm10m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm11: pwm@fe6f0030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0030 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm11m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm12: pwm@fe700000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700000 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm12m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm13: pwm@fe700010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700010 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm13m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm14: pwm@fe700020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700020 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm14m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm15: pwm@fe700030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700030 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm15m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> pinctrl: pinctrl {
> compatible = "rockchip,rk3568-pinctrl";
> rockchip,grf = <&grf>;
>
next prev parent reply other threads:[~2021-06-22 10:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-22 10:29 [PATCH 09/10] arm64: dts: rockchip: add pwm nodes for rk3568 Heiko Stuebner
2021-06-22 10:29 ` Heiko Stuebner
2021-06-22 10:29 ` Heiko Stuebner
2021-06-22 10:29 ` [PATCH 10/10] arm64: dts: rockchip: add watchdog to rk3568 Heiko Stuebner
2021-06-22 10:29 ` Heiko Stuebner
2021-06-22 10:29 ` Heiko Stuebner
2021-06-22 10:36 ` Heiko Stübner [this message]
2021-06-22 10:36 ` [PATCH 09/10] arm64: dts: rockchip: add pwm nodes for rk3568 Heiko Stübner
2021-06-22 10:36 ` Heiko Stübner
2021-07-26 8:39 ` (subset) " Heiko Stuebner
2021-07-26 8:39 ` Heiko Stuebner
2021-07-26 8:39 ` Heiko Stuebner
2021-07-26 9:05 ` Heiko Stübner
2021-07-26 9:05 ` Heiko Stübner
2021-07-26 9:05 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4401172.xlVK0Xs8nM@diego \
--to=heiko@sntech.de \
--cc=cl@rock-chips.com \
--cc=kever.yang@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.