* XenMon's first reading
@ 2006-03-10 0:20 Tim Freeman
2006-03-10 0:27 ` Rob Gardner
0 siblings, 1 reply; 2+ messages in thread
From: Tim Freeman @ 2006-03-10 0:20 UTC (permalink / raw)
To: xen-devel
In XenMon's file appending mode, a lot of times I'll get a strange first data
point, e.g., the cpu% for dom0 will be 99.9 but the rest of the readings will be
19-21 which are sane for the run. I've been throwing the data point out, but
was curious about it. Is it unavoidable?
Thanks,
Tim
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: XenMon's first reading
2006-03-10 0:20 XenMon's first reading Tim Freeman
@ 2006-03-10 0:27 ` Rob Gardner
0 siblings, 0 replies; 2+ messages in thread
From: Rob Gardner @ 2006-03-10 0:27 UTC (permalink / raw)
To: Tim Freeman; +Cc: xen-devel
Tim Freeman wrote:
>In XenMon's file appending mode, a lot of times I'll get a strange first data
>point, e.g., the cpu% for dom0 will be 99.9 but the rest of the readings will be
>19-21 which are sane for the run. I've been throwing the data point out, but
>was curious about it. Is it unavoidable?
>
>
This problem has been reported before, but since it's so easy to work
around it, we haven't put much priority on fixing it. I'm sure it's
avoidable behavior. ;)
Rob
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-03-10 0:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-03-10 0:20 XenMon's first reading Tim Freeman
2006-03-10 0:27 ` Rob Gardner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.