* ACPI error in 2.6.16
@ 2006-03-22 22:59 Francesco Biscani
2006-03-23 1:21 ` Jiri Slaby
0 siblings, 1 reply; 3+ messages in thread
From: Francesco Biscani @ 2006-03-22 22:59 UTC (permalink / raw)
To: Linux Kernel Mailing List
Hello,
sometimes at boot I get the following from the logs:
ACPI: write EC, IB not empty
ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for
[EmbeddedControl] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed
[\_SB_.PCI0.ISA_.EC0_.SMRD] (Node c13ecd40), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.UPBI]
(Node dbf42720), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.CHBP]
(Node dbf42660), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed
[\_SB_.PCI0.ISA_.EC0_.SMSL] (Node c13ecce0), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed
[\_SB_.PCI0.ISA_.EC0_._Q09] (Node c13ecc40), AE_TIME
And after that the battery is reported as absent (even if it is physically
present). I get the impression that this happens when rebooting, not
from "cold powerons".
This did not happen in 2.6.15, it appeared somewhere in 2.6.16-rc series.
Regards,
Francesco
--
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
biscani@pd.astro.it
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ACPI error in 2.6.16
2006-03-22 22:59 ACPI error in 2.6.16 Francesco Biscani
@ 2006-03-23 1:21 ` Jiri Slaby
2006-03-23 2:34 ` Andrew Morton
0 siblings, 1 reply; 3+ messages in thread
From: Jiri Slaby @ 2006-03-23 1:21 UTC (permalink / raw)
To: Francesco Biscani; +Cc: Linux Kernel Mailing List
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Francesco Biscani napsal(a):
> Hello,
>
> sometimes at boot I get the following from the logs:
>
> ACPI: write EC, IB not empty
> ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for
> [EmbeddedControl] [20060127]
> ACPI Error (psparse-0517): Method parse/execution failed
> [\_SB_.PCI0.ISA_.EC0_.SMRD] (Node c13ecd40), AE_TIME
> ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.UPBI]
> (Node dbf42720), AE_TIME
> ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.CHBP]
> (Node dbf42660), AE_TIME
> ACPI Error (psparse-0517): Method parse/execution failed
> [\_SB_.PCI0.ISA_.EC0_.SMSL] (Node c13ecce0), AE_TIME
> ACPI Error (psparse-0517): Method parse/execution failed
> [\_SB_.PCI0.ISA_.EC0_._Q09] (Node c13ecc40), AE_TIME
>
> And after that the battery is reported as absent (even if it is physically
> present). I get the impression that this happens when rebooting, not
> from "cold powerons".
>
> This did not happen in 2.6.15, it appeared somewhere in 2.6.16-rc series.
Could you post dmesgs of both, acpidump and .config? Could you bisect them?
regards,
- --
Jiri Slaby www.fi.muni.cz/~xslaby
~\-/~ jirislaby@gmail.com ~\-/~
B67499670407CE62ACC8 22A032CC55C339D47A7E
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFEIfg0MsxVwznUen4RApQaAKCRk+LUG+wasgLbeiNqAsfxyUsB0ACgkpNY
y23B68tNzhfKTCnEc+EYOTo=
=HjEW
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ACPI error in 2.6.16
2006-03-23 1:21 ` Jiri Slaby
@ 2006-03-23 2:34 ` Andrew Morton
0 siblings, 0 replies; 3+ messages in thread
From: Andrew Morton @ 2006-03-23 2:34 UTC (permalink / raw)
To: Jiri Slaby; +Cc: biscani, linux-kernel, linux-acpi
Jiri Slaby <slaby@liberouter.org> wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Francesco Biscani napsal(a):
> > Hello,
> >
> > sometimes at boot I get the following from the logs:
> >
> > ACPI: write EC, IB not empty
> > ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for
> > [EmbeddedControl] [20060127]
> > ACPI Error (psparse-0517): Method parse/execution failed
> > [\_SB_.PCI0.ISA_.EC0_.SMRD] (Node c13ecd40), AE_TIME
> > ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.UPBI]
> > (Node dbf42720), AE_TIME
> > ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.CHBP]
> > (Node dbf42660), AE_TIME
> > ACPI Error (psparse-0517): Method parse/execution failed
> > [\_SB_.PCI0.ISA_.EC0_.SMSL] (Node c13ecce0), AE_TIME
> > ACPI Error (psparse-0517): Method parse/execution failed
> > [\_SB_.PCI0.ISA_.EC0_._Q09] (Node c13ecc40), AE_TIME
> >
> > And after that the battery is reported as absent (even if it is physically
> > present). I get the impression that this happens when rebooting, not
> > from "cold powerons".
> >
> > This did not happen in 2.6.15, it appeared somewhere in 2.6.16-rc series.
> Could you post dmesgs of both, acpidump and .config? Could you bisect them?
>
And please Cc: linux-acpi@vger.kernel.org, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-03-23 2:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-03-22 22:59 ACPI error in 2.6.16 Francesco Biscani
2006-03-23 1:21 ` Jiri Slaby
2006-03-23 2:34 ` Andrew Morton
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.