* [Xenomai-help] (no subject)
@ 2006-04-04 15:04 Behre, Frederik - LT
2006-04-04 16:04 ` Philippe Gerum
2006-04-05 10:53 ` RESEND: [Xenomai-help] Xenomai on PPC Philippe Gerum
0 siblings, 2 replies; 3+ messages in thread
From: Behre, Frederik - LT @ 2006-04-04 15:04 UTC (permalink / raw)
To: xenomai
[-- Attachment #1: Type: text/plain, Size: 4927 bytes --]
Hello
I have following Problem when I Build my uImage from my kernel.
But first my configuration
Host system:
ix86
Suse Linux 10.0 32bit
Cross Compiler
Denx eldk ver. 3.11
(www.denx.de)
Target System
PPC (MPC8270) on Microsys PM827 Board.
linuxppc_2_4_devel-2005-10-25-1440
xenomai-2.1
adeos-ipipe-2.4.25-ppc-denx-1.0-03.patch
I did following Steps
installing the eldk
export Path to the Cross compiler to system Path
extrakt linux and xenomai
copy adeos
THEN
>./xenomai-2.1.0/scripts/prepare-kernel.sh --arch=powerpc \
--adeos=adeos-ipipe-2.4.25-ppc-denx-1.0-03patch \
--linux=linuxppc_2_4_devel-2005-10-25-1440/
patching file arch/ppc/config.in
patching file arch/ppc/kernel/Makefile
patching file arch/ppc/kernel/entry.S
patching file arch/ppc/kernel/head.S
patching file arch/ppc/kernel/head_440.S
patching file arch/ppc/kernel/head_44x.S
patching file arch/ppc/kernel/head_4xx.S
patching file arch/ppc/kernel/head_8xx.S
patching file arch/ppc/kernel/head_e500.S
patching file arch/ppc/kernel/idle.c
patching file arch/ppc/kernel/ipipe-core.c
patching file arch/ppc/kernel/ipipe-root.c
patching file arch/ppc/kernel/irq.c
patching file arch/ppc/kernel/ppc_ksyms.c
patching file arch/ppc/kernel/traps.c
patching file arch/ppc/mm/fault.c
patching file include/asm-ppc/hw_irq.h
patching file include/asm-ppc/ipipe.h
patching file include/asm-ppc/mmu_context.h
patching file include/asm-ppc/system.h
patching file include/linux/ipipe.h
patching file include/linux/sched.h
patching file init/main.c
patching file kernel/Makefile
patching file kernel/exit.c
patching file kernel/fork.c
patching file kernel/ipipe/Makefile
patching file kernel/ipipe/core.c
patching file kernel/ipipe/generic.c
patching file kernel/printk.c
patching file kernel/sched.c
patching file kernel/signal.c
# I think I is ok ???
>cd linuxppc_2_4_devel-2005-10-25-1440
>make ARCH=ppc CROSS_COMPILE=ppc_82xx- PM825config
/bin/sh: ppc-82xx-gcc: command not found
make: *** No rule to make target `PM825config'. Stop.
# default settings for my board
>make ARCH=ppc CROSS_COMPILE=ppc_82xx- menuconfig
#
# Turn off PCI because my targetboard does not support PCI
# activate Xenomai and Nucleus
# nothing more, the rest I leave in default settings
#
# Exit and Save
#
>make ARCH=ppc CROSS_COMPILE=ppc_82xx- uImage
make[5]: Entering directory
`/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenoma
i/arch/generic'
ppc_82xx-gcc -D__KERNEL__
-I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include
-Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
-fno-common -fomit-frame-pointer
-I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/arch/ppc
-fsigned-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized
-mmultiple -mstring
-I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/xeno
mai
-I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/xeno
mai/compat -nostdinc -I
/root/eldk/311/usr/lib/gcc-lib/ppc-linux/3.3.3/include
-DKBUILD_BASENAME=hal -c -o hal.o hal.c
In file included from
/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm/xe
nomai/hal.h:32,
from hal.c:43:
/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm-generic
/xenomai/hal.h:60:2: #error "Adeos kernel support is required to run
this software."
/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm-generic
/xenomai/hal.h:61:2: #error "See http://download.gna.org/adeos/patches/"
In file included from
/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm/xe
nomai/hal.h:32,
from hal.c:43:
/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm-generic
/xenomai/hal.h: In function `rthal_get_cpufreq':
/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm-generic
/xenomai/hal.h:171: error: storage size of `sysinfo' isn't known
...
...
...ect...
...
...
make[5]: *** [hal.o] Error 1
make[5]: Leaving directory
`/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenoma
i/arch/generic'
make[4]: *** [first_rule] Error 2
make[4]: Leaving directory
`/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenoma
i/arch/generic'
make[3]: *** [_subdir_generic] Error 2
make[3]: Leaving directory
`/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenoma
i/arch'
make[2]: *** [_subdir_arch] Error 2
make[2]: Leaving directory
`/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenoma
i'
make[1]: *** [_subdir_xenomai] Error 2
make[1]: Leaving directory
`/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel'
make: *** [_dir_kernel] Error 2
#
# and here is my problem
# what did I make wrong ??
Thanks a lot for Helping me.
Greetz Freddy'xenomai@xenomai.org'
[-- Attachment #2: Type: text/html, Size: 9762 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Xenomai-help] (no subject)
2006-04-04 15:04 [Xenomai-help] (no subject) Behre, Frederik - LT
@ 2006-04-04 16:04 ` Philippe Gerum
2006-04-05 10:53 ` RESEND: [Xenomai-help] Xenomai on PPC Philippe Gerum
1 sibling, 0 replies; 3+ messages in thread
From: Philippe Gerum @ 2006-04-04 16:04 UTC (permalink / raw)
To: Behre, Frederik - LT; +Cc: xenomai
Behre, Frederik - LT wrote:
> Hello
>
> I have following Problem when I Build my uImage from my kernel.
>
> But first my configuration
>
> Host system:
> ix86
> Suse Linux 10.0 32bit
>
> Cross Compiler
> Denx eldk ver. 3.11
> (_www.denx.de_ <file://www.denx.de>)
>
> Target System
> PPC (MPC8270) on Microsys PM827 Board.
> linuxppc_2_4_devel-2005-10-25-1440
> xenomai-2.1
> adeos-ipipe-2.4.25-ppc-denx-1.0-03.patch
>
> I did following Steps
>
> installing the eldk
> export Path to the Cross compiler to system Path
> extrakt linux and xenomai
> copy adeos
>
> THEN
> >./xenomai-2.1.0/scripts/prepare-kernel.sh --arch=powerpc \
> --adeos=adeos-ipipe-2.4.25-ppc-denx-1.0-03patch \
> --linux=linuxppc_2_4_devel-2005-10-25-1440/
> patching file arch/ppc/config.in
> patching file arch/ppc/kernel/Makefile
> patching file arch/ppc/kernel/entry.S
> patching file arch/ppc/kernel/head.S
> patching file arch/ppc/kernel/head_440.S
> patching file arch/ppc/kernel/head_44x.S
> patching file arch/ppc/kernel/head_4xx.S
> patching file arch/ppc/kernel/head_8xx.S
> patching file arch/ppc/kernel/head_e500.S
> patching file arch/ppc/kernel/idle.c
> patching file arch/ppc/kernel/ipipe-core.c
> patching file arch/ppc/kernel/ipipe-root.c
> patching file arch/ppc/kernel/irq.c
> patching file arch/ppc/kernel/ppc_ksyms.c
> patching file arch/ppc/kernel/traps.c
> patching file arch/ppc/mm/fault.c
> patching file include/asm-ppc/hw_irq.h
> patching file include/asm-ppc/ipipe.h
> patching file include/asm-ppc/mmu_context.h
> patching file include/asm-ppc/system.h
> patching file include/linux/ipipe.h
> patching file include/linux/sched.h
> patching file init/main.c
> patching file kernel/Makefile
> patching file kernel/exit.c
> patching file kernel/fork.c
> patching file kernel/ipipe/Makefile
> patching file kernel/ipipe/core.c
> patching file kernel/ipipe/generic.c
> patching file kernel/printk.c
> patching file kernel/sched.c
> patching file kernel/signal.c
>
> # I think I is ok ???
>
Yes.
> >cd linuxppc_2_4_devel-2005-10-25-1440
> >make ARCH=ppc CROSS_COMPILE=ppc_82xx- PM825config
> /bin/sh: ppc-82xx-gcc: command not found
> make: *** No rule to make target `PM825config'. Stop.
>
> # default settings for my board
>
> >make ARCH=ppc CROSS_COMPILE=ppc_82xx- menuconfig
> #
> # Turn off PCI because my targetboard does not support PCI
> # activate Xenomai and Nucleus
> # nothing more, the rest I leave in default settings
> #
> # Exit and Save
> #
> >make ARCH=ppc CROSS_COMPILE=ppc_82xx- uImage
>
> make[5]: Entering directory
> `/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenomai/arch/generic'
>
> ppc_82xx-gcc -D__KERNEL__
> -I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include
> -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
> -fno-common -fomit-frame-pointer
> -I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/arch/ppc
> -fsigned-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized
> -mmultiple -mstring
> -I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/xenomai
> -I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/xenomai/compat
> -nostdinc -I /root/eldk/311/usr/lib/gcc-lib/ppc-linux/3.3.3/include
> -DKBUILD_BASENAME=hal -c -o hal.o hal.c
>
> In file included from
> /root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm/xenomai/hal.h:32,
>
You did not switch on the I-pipe support in your kernel configuration,
see "General setup".
> from hal.c:43:
> /eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm-generic/xenomai/hal.h:60:2:
> #error "Adeos kernel support is required to run this software."
>
> /eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm-generic/xenomai/hal.h:61:2:
> #error "See _http://download.gna.org/adeos/patches/_"
>
> In file included from
> /root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm/xenomai/hal.h:32,
>
> from hal.c:43:
> /eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm-generic/xenomai/hal.h:
> In function `rthal_get_cpufreq':
>
> /eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm-generic/xenomai/hal.h:171:
> error: storage size of `sysinfo' isn't known
>
> ...
> ...
> ...ect...
> ...
> ...
> make[5]: *** [hal.o] Error 1
> make[5]: Leaving directory
> `/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenomai/arch/generic'
>
> make[4]: *** [first_rule] Error 2
> make[4]: Leaving directory
> `/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenomai/arch/generic'
>
> make[3]: *** [_subdir_generic] Error 2
> make[3]: Leaving directory
> `/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenomai/arch'
>
> make[2]: *** [_subdir_arch] Error 2
> make[2]: Leaving directory
> `/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel/xenomai'
> make[1]: *** [_subdir_xenomai] Error 2
> make[1]: Leaving directory
> `/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/kernel'
> make: *** [_dir_kernel] Error 2
>
> #
> # and here is my problem
> # what did I make wrong ??
>
>
> Thanks a lot for Helping me.
>
> Greetz Freddy'xenomai@xenomai.org'
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help
--
Philippe.
^ permalink raw reply [flat|nested] 3+ messages in thread
* RESEND: [Xenomai-help] Xenomai on PPC
2006-04-04 15:04 [Xenomai-help] (no subject) Behre, Frederik - LT
2006-04-04 16:04 ` Philippe Gerum
@ 2006-04-05 10:53 ` Philippe Gerum
1 sibling, 0 replies; 3+ messages in thread
From: Philippe Gerum @ 2006-04-05 10:53 UTC (permalink / raw)
To: Behre, Frederik - LT; +Cc: xenomai
Behre, Frederik - LT wrote:
> Hello
>
> I have following Problem when I Build my uImage from my kernel.
>
>
> ppc_82xx-gcc -D__KERNEL__
> -I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include
> -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
> -fno-common -fomit-frame-pointer
> -I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/arch/ppc
> -fsigned-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized
> -mmultiple -mstring
> -I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/xenomai
> -I/root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/xenomai/compat
> -nostdinc -I /root/eldk/311/usr/lib/gcc-lib/ppc-linux/3.3.3/include
> -DKBUILD_BASENAME=hal -c -o hal.o hal.c
>
> In file included from
> /root/eldk/311/usr/src/linuxppc_2_4_devel-2005-10-25-1440/include/asm/xenomai/hal.h:32,
>
You did not switch on the I-pipe support in your kernel configuration,
see "General setup".
--
Philippe.
_______________________________________________
Xenomai-help mailing list
Xenomai-help@domain.hid
https://mail.gna.org/listinfo/xenomai-help
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-04-05 10:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-04-04 15:04 [Xenomai-help] (no subject) Behre, Frederik - LT
2006-04-04 16:04 ` Philippe Gerum
2006-04-05 10:53 ` RESEND: [Xenomai-help] Xenomai on PPC Philippe Gerum
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.