Unmodified 2003/2000/FC5 on XEN 3.0.2

Unmodified 2003/2000/FC5 on XEN 3.0.2

[Ahamed K, Rafiq (HP)]

[-- Attachment #1.1: Type: text/plain, Size: 463 bytes --]

I can see that Windows Loads in VM  and when I run in safe mode it
reaches until loading 
 
multi(0)\disk(0)\rdisk(0)\partition(1)\Windows\system32\drivers\Mup.sys 
 
After this it hangs.Attached is the qemulog.
 
Note : These VM's are running out of a complete disk (/dev/sdb), which
has working installation of Windows on it!
 
I am running FC5 along with Xen 3.0.2 (tried unstable too) on Intel XEON
VT-x server!
 
Any help would be great! Rafiq

[-- Attachment #1.2: Type: text/html, Size: 1954 bytes --]

[-- Attachment #2: qemu-dm.5858.log --]
[-- Type: application/octet-stream, Size: 1596 bytes --]

domid: 2
qemu: the number of cpus is 1
Connected to host network interface: tun0
shared page at pfn:40400, mfn: a5c65
Could not open CD (null).
char device redirected to /dev/pts/2
HFalse I/O request ... in-service already: 3, pvalid: 0, port: e9, data: 48, count: 1, size: 1
VM Loader
Loading ROMBIOS ...
Loading Standard VGABIOS ...
Loading VMXAssist ...
VMX go ...
VMXAssist (Mar  9 2006)
Memory size 1024 MB
E820 map:
0000000000000000 - 000000000009F800 (RAM)
000000000009F800 - 00000000000A0000 (Reserved)
00000000000A0000 - 00000000000C0000 (Type 16)
00000000000F0000 - 0000000000100000 (Reserved)
0000000000100000 - 000000003FFFE000 (RAM)
000000003FFFE000 - 000000003FFFF000 (Type 18)
000000003FFFF000 - 0000000040000000 (Type 17)
0000000040000000 - 0000000040003000 (ACPI NVS)
0000000040003000 - 000000004000D000 (ACPI Data)
00000000FEC00000 - 0000000100000000 (Type 16)

Start BIOS ...
Starting emulated 16-bit real-mode: ip=F000:FFF0
 rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
HVM_PIT:guest init pit channel 0!
HVM_PIT:pass info 0xc00e90b to HV!
Remapping master: ICW2 0x8 -> 0x20
Remapping slave: ICW2 0x70 -> 0x28
VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $
HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $

ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (-30804 MBytes)
ata0  slave: Unknown device

Booting from Hard Disk...
unsupported PCI BIOS function 0x0E
*** int 15h function AX=5300, BX=0000 not yet supported!
int13_harddisk: function 15, unmapped device for ELDL=81

[-- Attachment #3: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Re: Unmodified 2003/2000/FC5 on XEN 3.0.2

[Thorolf Godawa]

Hi,

> I can see that Windows Loads in VM  and when I run in safe mode it 
> reaches until loading
> multi(0)\disk(0)\rdisk(0)\partition(1)\Windows\system32\drivers\Mup.sys
well, seems that windows has a problem with the boot-partition-order.

> Note : These VM's are running out of a complete disk (/dev/sdb), 
> which has working installation of Windows on it!
I never tried it because it doesn't make much sense, mostly because 
there is quite different hardware between the real PC and the 
Xen-virtualisation but also because it is much easier to handle just an 
imagefile on Linux than a whole windows-partition!

> I am running FC5 along with Xen 3.0.2 (tried unstable too) on Intel 
> XEON VT-x server!
I don't know FC5, but the latest SuSE SLES 10 Beta with Xen 3.0.2 runs 
fine on a Intel Xeon-server (3,2GHz Dual-CPU, dualcore, AM64T, HT, VT), 
including WXP, W2k3 and Ubuntu as unmodified guests!
-- 

Chau y hasta luego,

Thorolf