* [LARTC] How to write a catch all rule? @ 2006-04-30 6:26 Unga 2006-04-30 7:30 ` Andreas Unterkircher 2006-05-07 19:27 ` Andy Furniss 0 siblings, 2 replies; 3+ messages in thread From: Unga @ 2006-04-30 6:26 UTC (permalink / raw) To: lartc Hi all I'm new to Qos and iproute2, but studied well the documentation. According to http://lartc.org/howto/lartc.qdisc.filters.html, catch all rule should be written as follows: tc filter add dev eth0 protocol ip parent 10: prio 2 \ flowid 10:2 But it doesn't work because filtertype is missing. Can somebody please kindly explain how to write a catch all rule? Many thanks in advance. Best Regards Unga __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] How to write a catch all rule? 2006-04-30 6:26 [LARTC] How to write a catch all rule? Unga @ 2006-04-30 7:30 ` Andreas Unterkircher 2006-05-07 19:27 ` Andy Furniss 1 sibling, 0 replies; 3+ messages in thread From: Andreas Unterkircher @ 2006-04-30 7:30 UTC (permalink / raw) To: lartc http://mailman.ds9a.nl/pipermail/lartc/2005q3/016774.html Unga schrieb: > Hi all > > I'm new to Qos and iproute2, but studied well the > documentation. > > According to > http://lartc.org/howto/lartc.qdisc.filters.html, catch > all rule should be written as follows: > > tc filter add dev eth0 protocol ip parent 10: prio 2 > \ > flowid 10:2 > > But it doesn't work because filtertype is missing. > > Can somebody please kindly explain how to write a > catch all rule? > > Many thanks in advance. > > Best Regards > Unga > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] How to write a catch all rule? 2006-04-30 6:26 [LARTC] How to write a catch all rule? Unga 2006-04-30 7:30 ` Andreas Unterkircher @ 2006-05-07 19:27 ` Andy Furniss 1 sibling, 0 replies; 3+ messages in thread From: Andy Furniss @ 2006-05-07 19:27 UTC (permalink / raw) To: lartc Andreas Unterkircher wrote: > http://mailman.ds9a.nl/pipermail/lartc/2005q3/016774.html tc filter add dev eth0 parent 1:0 protocol all u32 match u32 0 0 flowid 1:1 That will match all. Someone told me once that the difference between it working and not on a large rule set was the explicit inclusion of prio XX. To the OP you may mean all ip (as in the lartc example) - in which case replace the all with ip and give it a higher prio number than the other rules/ put it last. Protocol all will catch arp etc aswell which may not be what you want./ One gotcha is that the highest prio on a filter is 1 so don't use 0 or that filter may be "last". Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-05-07 19:27 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2006-04-30 6:26 [LARTC] How to write a catch all rule? Unga 2006-04-30 7:30 ` Andreas Unterkircher 2006-05-07 19:27 ` Andy Furniss
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.