* LSI megaraid sas performance
@ 2006-05-10 14:03 Mirko Benz
0 siblings, 0 replies; only message in thread
From: Mirko Benz @ 2006-05-10 14:03 UTC (permalink / raw)
To: linux-scsi
Hello,
We are testing the LSI 8480E SAS RAID controller with the following setup:
- Dual XEON server, 1 GB RAM
- 12 SATA II disks in Promise J300S SAS JBOD connected with a single x4
SAS cable
- stripe size is 64k, write back caching enabled
Measured with IOMETER. First two values are for read/write with 64 kb
block size with sequential I/O. Default test is RANDOM I/O 2/3 read +
1/3 write at 2k block size.
- Windows 2003 Server-64 bit:
RAID 0 - R: 606 MB/s, W: 335 MB/s, Default: 820 IOPS
RAID 5 - R: 593 MB/s, W: 304 MB/s, Default: 475 IOPS
//RAID 0 write should be better but otherwise ok
- Linux 2.6.16.9-64 bit:
RAID 0 - R: 165 MB/s, W: 373 MB/s, Default: 76 IOPS
RAID 5 - R: 147 MB/s, W: 285 MB/s, Default: 74 IOPS
READ performance is bad. Random I/O is like a single disk. The 8408
(internal version) shows the same behaveour. Has anyone else results for
this controller or suggestions to improve this?
Thanks,
Mirko
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-05-10 14:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-10 14:03 LSI megaraid sas performance Mirko Benz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.