From: George Nychis <gnychis@cmu.edu>
To: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: linux-lvm@redhat.com, linux-kernel@vger.kernel.org,
Willy Tarreau <willy@w.ods.org>
Subject: [linux-lvm] Re: need help booting from SATA in 2.4.32 / LVM
Date: Wed, 17 May 2006 13:30:18 -0400 [thread overview]
Message-ID: <446B5DAA.8020004@cmu.edu> (raw)
In-Reply-To: <20060517155335.GF23933@csclub.uwaterloo.ca>
Lennart Sorensen wrote:
> On Wed, May 17, 2006 at 09:40:52AM -0400, George Nychis wrote:
>> Because it does......
>>
>> on bootup the *same* exact drive in 2.4.32 shows up as /dev/hda
>>
>> It has the exact same volume information as my drive that shows up in
>> 2.6.9 as /dev/sda
>
> Yes I do remember a few sata controllers had some support in 2.4, which
> was dropped from 2.6 early on when libata came in.
>
> It is very unlikely you will ever see that again in the future.
>
> Len Sorensen
>
I see... well I am finally getting it to boot, i did not have initrd
support built into the 2.4.32 kernel, but now i'm getting LVM errors:
Scanning logical volumes
/bin/vgscan.lvm1: execvp failed: No such file or directory
ERROR: /bin/vgscan exited abnormally!
Activating logical volumes
/bin/vgchange.lvm1: execvp failed: No such file or directory
ERROR: /bin/vgchange exited abnormally!
I know nothing about LVM so... i'm pretty clueless for now
WARNING: multiple messages have this Message-ID (diff)
From: George Nychis <gnychis@cmu.edu>
To: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Willy Tarreau <willy@w.ods.org>,
linux-kernel@vger.kernel.org, linux-lvm@redhat.com
Subject: Re: need help booting from SATA in 2.4.32 / LVM
Date: Wed, 17 May 2006 13:30:18 -0400 [thread overview]
Message-ID: <446B5DAA.8020004@cmu.edu> (raw)
In-Reply-To: <20060517155335.GF23933@csclub.uwaterloo.ca>
Lennart Sorensen wrote:
> On Wed, May 17, 2006 at 09:40:52AM -0400, George Nychis wrote:
>> Because it does......
>>
>> on bootup the *same* exact drive in 2.4.32 shows up as /dev/hda
>>
>> It has the exact same volume information as my drive that shows up in
>> 2.6.9 as /dev/sda
>
> Yes I do remember a few sata controllers had some support in 2.4, which
> was dropped from 2.6 early on when libata came in.
>
> It is very unlikely you will ever see that again in the future.
>
> Len Sorensen
>
I see... well I am finally getting it to boot, i did not have initrd
support built into the 2.4.32 kernel, but now i'm getting LVM errors:
Scanning logical volumes
/bin/vgscan.lvm1: execvp failed: No such file or directory
ERROR: /bin/vgscan exited abnormally!
Activating logical volumes
/bin/vgchange.lvm1: execvp failed: No such file or directory
ERROR: /bin/vgchange exited abnormally!
I know nothing about LVM so... i'm pretty clueless for now
next prev parent reply other threads:[~2006-05-17 17:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-16 20:31 need help booting from SATA in 2.4.32 George Nychis
2006-05-16 20:39 ` Willy Tarreau
2006-05-16 21:18 ` George Nychis
2006-05-17 3:48 ` Willy Tarreau
2006-05-17 13:29 ` [linux-lvm] " George Nychis
2006-05-17 13:29 ` George Nychis
2006-05-17 13:34 ` [linux-lvm] " Lennart Sorensen
2006-05-17 13:34 ` Lennart Sorensen
2006-05-17 13:40 ` [linux-lvm] " George Nychis
2006-05-17 13:40 ` George Nychis
2006-05-17 15:53 ` [linux-lvm] " Lennart Sorensen
2006-05-17 15:53 ` Lennart Sorensen
2006-05-17 17:30 ` George Nychis [this message]
2006-05-17 17:30 ` need help booting from SATA in 2.4.32 / LVM George Nychis
2006-05-17 20:37 ` [linux-lvm] " Willy Tarreau
2006-05-17 20:37 ` Willy Tarreau
2006-05-17 14:24 ` [linux-lvm] Re: need help booting from SATA in 2.4.32 Willy Tarreau
2006-05-17 14:24 ` Willy Tarreau
2006-05-17 15:13 ` [linux-lvm] help booting from SATA in 2.4.32.. initrd not loading George Nychis
2006-05-17 15:13 ` George Nychis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=446B5DAA.8020004@cmu.edu \
--to=gnychis@cmu.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-lvm@redhat.com \
--cc=lsorense@csclub.uwaterloo.ca \
--cc=willy@w.ods.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.