All of lore.kernel.org
 help / color / mirror / Atom feed
* NAND oob bad blocks
@ 2006-06-07  7:30 Terence Soh
  0 siblings, 0 replies; only message in thread
From: Terence Soh @ 2006-06-07  7:30 UTC (permalink / raw)
  To: linux-mtd

Hi,

I'm using 2.6.11 kernel with the MTD drivers from kernel.org. On my 
board, u-boot is reporting 2 bad blocks while the kernel is reporting 
only 1 bad block.

Looking at the MTD Nand Driver Programming Interface, it says the bad 
block marker only applies fo the first page in a block. However, both 
u-boot and the Samsung documentation(K9F1208X0B)says that either the 1st 
  or 2nd page of every initial block has non-FFh data at the column 
address of 517.

What am I missing here or is this a case of old code/documentation?

Thanks,
Terence.

^ permalink raw reply	[flat|nested] only message in thread
only message in thread, other threads:[~2006-06-07  7:32 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-07  7:30 NAND oob bad blocks Terence Soh

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.