* [LARTC] fwmark filter doesn't work as expected
@ 2006-06-14 10:09 Michał Margula
2006-06-26 11:51 ` Andy Furniss
0 siblings, 1 reply; 2+ messages in thread
From: Michał Margula @ 2006-06-14 10:09 UTC (permalink / raw)
To: lartc
Hello!
Currently I am marking packets with IPMARK, and then using following rules:
1: class add dev eth0 parent 1:4 classid 1:100a htb rate $rate ceil
$ceil quantum 1600
2: qdisc add dev eth0 parent 1:100a handle 100a:0 sfq perturb 10
3: filter add dev eth0 protocol ip parent 1:0 pref 30 handle 4106 fw
classid 1:100a
4: class add dev eth1 parent 1:2 classid 1:100a htb rate $rate ceil
$ceil quantum 1600
5: qdisc add dev eth1 parent 1:100a handle 100a:0 sfq perturb 10
6: filter add dev eth1 protocol ip parent 1:0 pref 30 u32 match ip dst
10.100.0.10 flowid 1:100a
Tried to remove line 3 and just putting one line instead:
filter add dev eth0 parent 1:0 protocol ip pref 30 fw
But it does not work. Any ideas?
--
Micha³ Margula, alchemyx@uznam.net.pl, http://alchemyx.uznam.net.pl/
"W ¿yciu piêkne s± tylko chwile" [Ryszard Riedel]
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] fwmark filter doesn't work as expected
2006-06-14 10:09 [LARTC] fwmark filter doesn't work as expected Michał Margula
@ 2006-06-26 11:51 ` Andy Furniss
0 siblings, 0 replies; 2+ messages in thread
From: Andy Furniss @ 2006-06-26 11:51 UTC (permalink / raw)
To: lartc
Micha³ Margula wrote:
> Hello!
>
> Currently I am marking packets with IPMARK, and then using following rules:
>
> 1: class add dev eth0 parent 1:4 classid 1:100a htb rate $rate ceil
> $ceil quantum 1600
> 2: qdisc add dev eth0 parent 1:100a handle 100a:0 sfq perturb 10
> 3: filter add dev eth0 protocol ip parent 1:0 pref 30 handle 4106 fw
> classid 1:100a
> 4: class add dev eth1 parent 1:2 classid 1:100a htb rate $rate ceil
> $ceil quantum 1600
> 5: qdisc add dev eth1 parent 1:100a handle 100a:0 sfq perturb 10
> 6: filter add dev eth1 protocol ip parent 1:0 pref 30 u32 match ip dst
> 10.100.0.10 flowid 1:100a
>
> Tried to remove line 3 and just putting one line instead:
>
> filter add dev eth0 parent 1:0 protocol ip pref 30 fw
>
> But it does not work. Any ideas?
>
You need to mark with the major number aswell so mark with 0x1100a
Andy.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-06-26 11:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-14 10:09 [LARTC] fwmark filter doesn't work as expected Michał Margula
2006-06-26 11:51 ` Andy Furniss
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.