[Bluez-devel] CSR hci continuous transmit mode?

[Bluez-devel] CSR hci continuous transmit mode?

[Michael Frey]

Does anyone know how to put a CSR Bluecore chip into continuous  
transmit mode using hcitool?


Michael


Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] CSR hci continuous transmit mode?

[Joshua Wright]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Michael Frey wrote:
> Does anyone know how to put a CSR Bluecore chip into continuous  
> transmit mode using hcitool?

Not with hcitool, check bccmd in the bluez-utils package.

- -Josh
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)

iD8DBQFEnAzqTS8i9jZYpL8RAm/YAJ9/3kIXLQwUZROKoJuQbFNtyC4UswCg3w3D
Z1sDtxlYvpX8qNf7sa7O3Vk=
=3/G+
-----END PGP SIGNATURE-----

Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] CSR hci continuous transmit mode?

[Peter Wippich]

Hi Michael,

On Fri, 23 Jun 2006, Michael Frey wrote:

> Does anyone know how to put a CSR Bluecore chip into continuous  
> transmit mode using hcitool?
> 
You can not do that using HCI Tool because this is a CSR specific 
low level testing command (may be you can figure our the necessary command 
sequence, but this will be very complicated). 

And as far as I know also the bccmd tool does not support CSR RF test 
commands. 

Ciao, 

Peter 


> 
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
> 


|       Peter Wippich                   Voice: +49 30 46776411          |
|       G&W Instruments GmbH            fax:   +49 30 46776419          |
|       Gustav-Meyer-Allee 25, Geb. 12  Email: pewi@gw-instruments.de   |
|       D-13355 Berlin  / Germany                                       |


Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] CSR hci continuous transmit mode?

[Brand, Chris]

> > Does anyone know how to put a CSR Bluecore chip into continuous 
> > transmit mode using hcitool?
> > 
> You can not do that using HCI Tool because this is a CSR 
> specific low level testing command (may be you can figure our 
> the necessary command sequence, but this will be very complicated). 
> 
> And as far as I know also the bccmd tool does not support CSR 
> RF test commands. 

This might be completely off-base, but it might not, so here goes...

I was looking at how to send the CSR "Enter Device Under Test Mode"
command, which sounds like it may be related. I found the ogf, ocf and
parameters in the CSR documentation (0x6, 0x3 and none, in this case).
Then I used
hcitool cmd 0x6 0x3
To send that command to the chip.

Chris

Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] CSR hci continuous transmit mode?

[Peter Wippich]

On Fri, 23 Jun 2006, Brand, Chris wrote:

Hi Chris, 

> I was looking at how to send the CSR "Enter Device Under Test Mode"
> command, which sounds like it may be related. I found the ogf, ocf and
> parameters in the CSR documentation (0x6, 0x3 and none, in this case).
> Then I used
> hcitool cmd 0x6 0x3
> To send that command to the chip.
This is something different. The device under test mode is intended to be 
used with a Bluetooth Tester. When the device is in DUT mode it can be 
controlled by a remote (Test) device. More specifics information about DUT 
mode can be found in the BT spec. 

Ciao, 
Peter 



> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
> 


|       Peter Wippich                   Voice: +49 30 46776411          |
|       G&W Instruments GmbH            fax:   +49 30 46776419          |
|       Gustav-Meyer-Allee 25, Geb. 12  Email: pewi@gw-instruments.de   |
|       D-13355 Berlin  / Germany                                       |


Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel