Re: [patch 2/6] [Network namespace] Network device sharing by view

[Ben Greear <greearb@candelatech.com>]

Ben Greear wrote:
> Herbert Poetzl wrote:
> 
>> On Mon, Jun 26, 2006 at 03:13:17PM -0700, Ben Greear wrote:
> 
> 
>> yes, that sounds good to me, any numbers how that
>> affects networking in general (performance wise and
>> memory wise, i.e. caches and hashes) ...
> 
> 
> I'll run some tests later today.  Based on my previous tests,
> I don't remember any significant overhead.

Here's a quick benchmark using my redirect devices (RDD).  Each
RDD comes in a pair...when you tx on one, the pkt is rx'd on the peer.
The idea is that it is exactly like two physical ethernet interfaces
connected by a cross-over cable.

My test system is a 64-bit dual-core Intel system, 3.013 Ghz processor with 1GB RAM.
Fairly standard stuff..it's one of the Shuttle XPC systems.
Kernel is 2.6.16.16 (64-bit).


Test setup is:  rdd1 -- rdd2   [bridge]   rdd3 -- rdd4

I am using my proprietary module for the bridge logic...and the default
bridge should be at least this fast.  I am injecting 1514 byte packets
on rdd1 and rdd4 with pktgen (bi-directional flow).  My pktgen is also
receiving the pkts and gathering stats.

This setup sustains 1.7Gbps of generated and received traffic between
rdd1 and rdd4.

Running only the [bridge] between two 10/100/1000 ports on an Intel PCI-E
NIC will sustain about 870Mbps (bi-directional) on this system, so the
virtual devices are quite efficient, as suspected.

I have not yet had time to benchmark the mac-vlans...hopefully later today.

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com