All of lore.kernel.org
 help / color / mirror / Atom feed
From: Girish <girish@picopeta.com>
To: linux-mtd@lists.infradead.org
Subject: 2k page Nand flash problem
Date: Fri, 30 Jun 2006 13:19:42 +0530	[thread overview]
Message-ID: <44A4D796.4070107@picopeta.com> (raw)

hi all,

    I have
            PXA-based board
            Hynix 256 Mb Nand flash(page size = 2k).
            Kernel-2.6.16.
 With Samsung 32mb Nand flash kernel-2.6.16 works fine  but with Hynix 
256 Mb Nand Flash it gives
 fallowing error messages ....

   
    Uncompressing 
Linux......................................................... done, 
booting the kernel.
Linux version 2.6.16-g00fdeb89-dirty (root@trojan.picopeta.com) (gcc 
version 3.4.2) #147 Fri Jun 30 12:20:49 6CPU: XScale-PXA255 [69052d06] 
revision 6 (ARMv5TE)
Machine: Amida Development Platform
Memory policy: ECC disabled, Data cache writeback
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 199.07MHz (*1.0, active)
MM: invalid domain in supersection mapping for 0x8000000000 at 0xf0000000
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: mem=64M console=ttyS0,115200 root=1f02
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 63012KB available (1408K code, 309K data, 76K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
fuse init (API version 7.6)
io scheduler noop registered (default)
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Probing Amida Simputer Application Flash at physical address 0x00000000 
(16-bit bankwidth)
Amida Simputer Application Flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
RedBoot partition parsing not available
cmdlinepart partition parsing not available
Using static partitions on Amida Simputer Application Flash
Creating 1 MTD partitions on "Amida Simputer Application Flash":
0x00000000-0x00040000 : "Bootloader"
mtd: Giving out device 0 to Bootloader
PARTITION Done Using static partitions on Amida Simputer Application Flash
physical (0x 8000000), virtual (0xc6900000)
NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 
3,3V 8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x00000000-0x00180000 : "Kernel"
mtd: Giving out device 1 to Kernel
0x00180000-0x00380000 : "/(cramfs)"
mtd: Giving out device 2 to /(cramfs)
0x00380000-0x10000000 : "/usr/local(jffs2)"
mtd: Giving out device 3 to /usr/local(jffs2)
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 
08:57:20 2006 UTC).
input: Touchscreen panel as /class/input/input0
Touch screen device number  17156
ALSA device list:
  #0: pxa2xx-ac97 (Philips UCB1400)
VFS: Mounted root (cramfs filesystem) readonly.
Freeing init memory: 76K
/sbin/init
nand_read_ecc: Failed ECC read, page 0x0000042a
nand_read_ecc: Failed ECC read, page 0x0000042a
end_request: I/O error, dev mtdblock2, sector 1192
Buffer I/O error on device mtdblock2, logical block 149
Error -5 while decompressing!
c01c1c63(2066)->c3caf000(4096)
Error -3 while decompressing!
c01c2475(2064)->c3cb0000(4096)
Error -3 while decompressing!
c01c1c85(2056)->c3cde000(4096)
/sbin/init: relocation error: /sbin/initKernel panic - not syncing: 
Attempted to kill init!
: symbol optind, version GLIBC_2.0 not defined in file libc.so.6  with 
link time reference

    
Any Solutions ...... ?

Thanks & regards
Girish

-- 

----------------------------------------------------------------------
" Faith begins when Ability ends...

Girish A J (girish.a@geodesiconline.com) 
Associate - Systems,		          Ph: (80) 2361 8184-86   Ext 135
PicoPeta Simputers Pvt Ltd.        Fax: (80) 2361 7568
146 5th Cross, RMV Extension,     
Bangalore - 560 080.               
URL  http://www.picopeta.com
-------------------------------------------------------------------------- 

             reply	other threads:[~2006-06-30  8:09 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-30  7:49 Girish [this message]
2006-07-03 11:24 ` 2k page Nand flash problem Girish
2006-07-03 12:15   ` Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44A4D796.4070107@picopeta.com \
    --to=girish@picopeta.com \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.