Re: 2k page Nand flash problem

[Girish <girish@picopeta.com>]

  hi ,
Sorry i forgot to mention that i am using NAND_ECC_SOFT option and 
chip_delay = 25us.
Thanks & regards
Girish


Girish wrote:

>hi all,
>
>    I have
>            PXA-based board
>            Hynix 256 Mb Nand flash(page size = 2k).
>            Kernel-2.6.16.
> With Samsung 32mb Nand flash kernel-2.6.16 works fine  but with Hynix 
>256 Mb Nand Flash it gives
> fallowing error messages ....
>
>   
>    Uncompressing 
>Linux......................................................... done, 
>booting the kernel.
>Linux version 2.6.16-g00fdeb89-dirty (root@trojan.picopeta.com) (gcc 
>version 3.4.2) #147 Fri Jun 30 12:20:49 6CPU: XScale-PXA255 [69052d06] 
>revision 6 (ARMv5TE)
>Machine: Amida Development Platform
>Memory policy: ECC disabled, Data cache writeback
>Memory clock: 99.53MHz (*27)
>Run Mode clock: 199.07MHz (*2)
>Turbo Mode clock: 199.07MHz (*1.0, active)
>MM: invalid domain in supersection mapping for 0x8000000000 at 0xf0000000
>CPU0: D VIVT undefined 5 cache
>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
>Built 1 zonelists
>Kernel command line: mem=64M console=ttyS0,115200 root=1f02
>PID hash table entries: 512 (order: 9, 8192 bytes)
>Console: colour dummy device 80x30
>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>Memory: 64MB = 64MB total
>Memory: 63012KB available (1408K code, 309K data, 76K init)
>Mount-cache hash table entries: 512
>CPU: Testing write buffer coherency: ok
>NetWinder Floating Point Emulator V0.97 (double precision)
>JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
>fuse init (API version 7.6)
>io scheduler noop registered (default)
>pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
>pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
>pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
>pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART
>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>loop: loaded (max 8 devices)
>Probing Amida Simputer Application Flash at physical address 0x00000000 
>(16-bit bankwidth)
>Amida Simputer Application Flash: Found 1 x16 devices at 0x0 in 16-bit bank
> Intel/Sharp Extended Query Table at 0x0035
>cfi_cmdset_0001: Erase suspend on write enabled
>RedBoot partition parsing not available
>cmdlinepart partition parsing not available
>Using static partitions on Amida Simputer Application Flash
>Creating 1 MTD partitions on "Amida Simputer Application Flash":
>0x00000000-0x00040000 : "Bootloader"
>mtd: Giving out device 0 to Bootloader
>PARTITION Done Using static partitions on Amida Simputer Application Flash
>physical (0x 8000000), virtual (0xc6900000)
>NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 
>3,3V 8-bit)
>Scanning device for bad blocks
>Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
>0x00000000-0x00180000 : "Kernel"
>mtd: Giving out device 1 to Kernel
>0x00180000-0x00380000 : "/(cramfs)"
>mtd: Giving out device 2 to /(cramfs)
>0x00380000-0x10000000 : "/usr/local(jffs2)"
>mtd: Giving out device 3 to /usr/local(jffs2)
>mice: PS/2 mouse device common for all mice
>ts: Compaq touchscreen protocol output
>Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 
>08:57:20 2006 UTC).
>input: Touchscreen panel as /class/input/input0
>Touch screen device number  17156
>ALSA device list:
>  #0: pxa2xx-ac97 (Philips UCB1400)
>VFS: Mounted root (cramfs filesystem) readonly.
>Freeing init memory: 76K
>/sbin/init
>nand_read_ecc: Failed ECC read, page 0x0000042a
>nand_read_ecc: Failed ECC read, page 0x0000042a
>end_request: I/O error, dev mtdblock2, sector 1192
>Buffer I/O error on device mtdblock2, logical block 149
>Error -5 while decompressing!
>c01c1c63(2066)->c3caf000(4096)
>Error -3 while decompressing!
>c01c2475(2064)->c3cb0000(4096)
>Error -3 while decompressing!
>c01c1c85(2056)->c3cde000(4096)
>/sbin/init: relocation error: /sbin/initKernel panic - not syncing: 
>Attempted to kill init!
>: symbol optind, version GLIBC_2.0 not defined in file libc.so.6  with 
>link time reference
>
>    
>Any Solutions ...... ?
>
>Thanks & regards
>Girish
>
>  
>


-- 

----------------------------------------------------------------------
" Faith begins when Ability ends...

Girish A J (girish.a@geodesiconline.com) 
Associate - Systems,		          Ph: (80) 2361 8184-86   Ext 135
PicoPeta Simputers Pvt Ltd.        Fax: (80) 2361 7568
146 5th Cross, RMV Extension,     
Bangalore - 560 080.               
URL  http://www.picopeta.com
--------------------------------------------------------------------------