From: Reuben Farrelly <reuben-lkml@reub.net>
To: Neil Brown <neilb@suse.de>
Cc: linux-kernel@vger.kernel.org, Andrew Morton <akpm@osdl.org>
Subject: Re: Weird RAID/SATA problem [ once was Re: 2.6.17-mm3 ]
Date: Sun, 02 Jul 2006 00:24:10 +1200 [thread overview]
Message-ID: <44A6696A.1010506@reub.net> (raw)
In-Reply-To: <17574.25837.681984.389682@cse.unsw.edu.au>
On 2/07/2006 12:05 a.m., Neil Brown wrote:
> On Saturday July 1, reuben-lkml@reub.net wrote:
>>> Only difference I can think of is still barriers... Does this patch
>>> make any difference?
>> You will be happy to know that yes, it does make a difference.
>>
>> Applied to -mm4, RAID-1 now comes up with all arrays in sync and everything
>> looking good. Tried it twice, and both times raid-1 came up perfectly with
>>
>> md0 : active raid1 sdc2[1] sda2[0]
>> 24410688 blocks [2/2] [UU]
>> bitmap: 0/187 pages [0KB], 64KB chunk
>>
>> for each md.
>>
>
> Cool.... so who is giving us that EIO. I'm guessing
> end_that_request_first or .._last, but where is it getting to there
> from?
>
> What is you remove that last patch (so it still tries barrier writes)
> but add this patch (so WARN_ON gives us a trace when it happens).
Bear in mind that this does not include Ingo's fix for the md stuff:
Bootdata ok (command line is ro root=/dev/md0 panic=60 console=ttyS0,57600 single)
Linux version 2.6.17-mm4 (root@tornado.reub.net) (gcc version 4.1.1 20060629
(Red Hat 4.1.1-6)) #3 SMP Sun Jul 2 00:11:13 NZST 2006
<snip>
mice: PS/2 mouse device common for all mice
md: raid1 personality registered for level 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EDAC MC: Ver: 2.0.0 Jul 1 2006
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Freeing unused kernel memory: 216k freed
Red Hat nash version 5.0.46 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading ide-disk.ko module
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda10
md: sda10 has invalid sb, not importing!
BUG: warning at fs/block_dev.c:1109/__blkdev_put()
Call Trace:
[<ffffffff802bf192>] __blkdev_put+0x9c/0x1bb
[<ffffffff802bf2bf>] blkdev_put_partition+0xe/0x10
[<ffffffff8041f434>] unlock_rdev+0x49/0x50
[<ffffffff8041fc9a>] md_import_device+0x24a/0x2a0
[<ffffffff8033af8a>] selinux_capable+0x24/0x29
[<ffffffff80424a21>] md_ioctl+0xc1/0x154f
[<ffffffff8033a693>] avc_has_perm+0x49/0x5b
[<ffffffff80350762>] blkdev_driver_ioctl+0x62/0x80
[<ffffffff80350e76>] blkdev_ioctl+0x6f6/0x75a
[<ffffffff8023f674>] wake_up_inode+0x18/0x24
[<ffffffff8033ae13>] inode_has_perm+0x62/0x71
[<ffffffff802bfa62>] blkdev_open+0x0/0x61
[<ffffffff802bfa8e>] blkdev_open+0x2c/0x61
[<ffffffff8033aecc>] file_has_perm+0xaa/0xb9
[<ffffffff802beb12>] block_ioctl+0x1b/0x1f
[<ffffffff802432ea>] do_ioctl+0x2a/0x8f
[<ffffffff8023185b>] vfs_ioctl+0x27b/0x2a0
[<ffffffff8024e76a>] sys_ioctl+0x5f/0x82
[<ffffffff8022fadd>] sys_fcntl+0x33d/0x34f
[<ffffffff8026014a>] system_call+0x7e/0x83
BUG: warning at fs/block_dev.c:1128/__blkdev_put()
Call Trace:
[<ffffffff803576f8>] kobject_put+0x19/0x21
[<ffffffff802bf274>] __blkdev_put+0x17e/0x1bb
[<ffffffff802bf2bf>] blkdev_put_partition+0xe/0x10
[<ffffffff8041f434>] unlock_rdev+0x49/0x50
[<ffffffff8041fc9a>] md_import_device+0x24a/0x2a0
[<ffffffff8033af8a>] selinux_capable+0x24/0x29
[<ffffffff80424a21>] md_ioctl+0xc1/0x154f
[<ffffffff8033a693>] avc_has_perm+0x49/0x5b
[<ffffffff80350762>] blkdev_driver_ioctl+0x62/0x80
[<ffffffff80350e76>] blkdev_ioctl+0x6f6/0x75a
[<ffffffff8023f674>] wake_up_inode+0x18/0x24
[<ffffffff8033ae13>] inode_has_perm+0x62/0x71
[<ffffffff802bfa62>] blkdev_open+0x0/0x61
[<ffffffff802bfa8e>] blkdev_open+0x2c/0x61
[<ffffffff8033aecc>] file_has_perm+0xaa/0xb9
[<ffffffff802beb12>] block_ioctl+0x1b/0x1f
[<ffffffff802432ea>] do_ioctl+0x2a/0x8f
[<ffffffff8023185b>] vfs_ioctl+0x27b/0x2a0
[<ffffffff8024e76a>] sys_ioctl+0x5f/0x82
[<ffffffff8022fadd>] sys_fcntl+0x33d/0x34f
[<ffffffff8026014a>] system_call+0x7e/0x83
md: invalid raid superblock magic on sdc10
md: sdc10 has invalid sb, not importing!
BUG: warning at fs/block_dev.c:1109/__blkdev_put()
Call Trace:
[<ffffffff802bf192>] __blkdev_put+0x9c/0x1bb
[<ffffffff802bf2bf>] blkdev_put_partition+0xe/0x10
[<ffffffff8041f434>] unlock_rdev+0x49/0x50
[<ffffffff8041fc9a>] md_import_device+0x24a/0x2a0
[<ffffffff8033af8a>] selinux_capable+0x24/0x29
[<ffffffff80424a21>] md_ioctl+0xc1/0x154f
[<ffffffff8033a693>] avc_has_perm+0x49/0x5b
[<ffffffff80350762>] blkdev_driver_ioctl+0x62/0x80
[<ffffffff80350e76>] blkdev_ioctl+0x6f6/0x75a
[<ffffffff8023f674>] wake_up_inode+0x18/0x24
[<ffffffff8033ae13>] inode_has_perm+0x62/0x71
[<ffffffff802bfa62>] blkdev_open+0x0/0x61
[<ffffffff802bfa8e>] blkdev_open+0x2c/0x61
[<ffffffff8033aecc>] file_has_perm+0xaa/0xb9
[<ffffffff802beb12>] block_ioctl+0x1b/0x1f
[<ffffffff802432ea>] do_ioctl+0x2a/0x8f
[<ffffffff8023185b>] vfs_ioctl+0x27b/0x2a0
[<ffffffff8024e76a>] sys_ioctl+0x5f/0x82
[<ffffffff8022fadd>] sys_fcntl+0x33d/0x34f
[<ffffffff8026014a>] system_call+0x7e/0x83
BUG: warning at fs/block_dev.c:1128/__blkdev_put()
Call Trace:
[<ffffffff803576f8>] kobject_put+0x19/0x21
[<ffffffff802bf274>] __blkdev_put+0x17e/0x1bb
[<ffffffff802bf2bf>] blkdev_put_partition+0xe/0x10
[<ffffffff8041f434>] unlock_rdev+0x49/0x50
[<ffffffff8041fc9a>] md_import_device+0x24a/0x2a0
[<ffffffff8033af8a>] selinux_capable+0x24/0x29
[<ffffffff80424a21>] md_ioctl+0xc1/0x154f
[<ffffffff8033a693>] avc_has_perm+0x49/0x5b
[<ffffffff80350762>] blkdev_driver_ioctl+0x62/0x80
[<ffffffff80350e76>] blkdev_ioctl+0x6f6/0x75a
[<ffffffff8023f674>] wake_up_inode+0x18/0x24
[<ffffffff8033ae13>] inode_has_perm+0x62/0x71
[<ffffffff802bfa62>] blkdev_open+0x0/0x61
[<ffffffff802bfa8e>] blkdev_open+0x2c/0x61
[<ffffffff8033aecc>] file_has_perm+0xaa/0xb9
[<ffffffff802beb12>] block_ioctl+0x1b/0x1f
[<ffffffff802432ea>] do_ioctl+0x2a/0x8f
[<ffffffff8023185b>] vfs_ioctl+0x27b/0x2a0
[<ffffffff8024e76a>] sys_ioctl+0x5f/0x82
[<ffffffff8022fadd>] sys_fcntl+0x33d/0x34f
[<ffffffff8026014a>] system_call+0x7e/0x83
md: autorun ...
md: considering sdc11 ...
md: adding sdc11 ...
md: sdc7 has different UUID to sdc11
md: sdc6 has different UUID to sdc11
md: sdc5 has different UUID to sdc11
md: sdc3 has different UUID to sdc11
md: sdc2 has different UUID to sdc11
md: adding sda11 ...
md: sda7 has different UUID to sdc11
md: sda6 has different UUID to sdc11
md: sda5 has different UUID to sdc11
md: sda3 has different UUID to sdc11
md: sda2 has different UUID to sdc11
md: created md5
md: bind<sda11>
md: bind<sdc11>
md: running: <sdc11><sda11>
raid1: raid set md5 active with 2 out of 2 mirrors
md5: bitmap initialized from disk: read 10/10 pages, set 0 bits, status: 0
created bitmap (153 pages) for device md5
BUG: warning at drivers/md/md.c:411/super_written_barrier()
Call Trace:
<IRQ> [<ffffffff80422231>] super_written_barrier+0x61/0x100
[<ffffffff8023c000>] bio_endio+0x5a/0x6a
[<ffffffff8022e24f>] __end_that_request_first+0x16f/0x4c9
[<ffffffff8024afaa>] end_that_request_first+0xc/0xe
[<ffffffff8034e825>] blk_ordered_complete_seq+0x7d/0x8c
[<ffffffff8034e864>] post_flush_end_io+0x30/0x35
[<ffffffff8034e748>] end_that_request_last+0xd8/0xf4
[<ffffffff803d83a1>] scsi_end_request+0xb1/0xdd
[<ffffffff803d87cd>] scsi_io_completion+0x3cd/0x3dc
[<ffffffff803d8802>] scsi_blk_pc_done+0x26/0x28
[<ffffffff803d3e53>] scsi_finish_command+0x66/0x73
[<ffffffff803d8b71>] scsi_softirq_done+0xe1/0xf0
[<ffffffff80239980>] blk_done_softirq+0x6e/0x7e
[<ffffffff80211f5e>] __do_softirq+0x63/0xe5
[<ffffffff80261322>] call_softirq+0x1e/0x28
[<ffffffff8026ac58>] do_softirq+0x34/0x8b
[<ffffffff802872c8>] irq_exit+0x48/0x4a
[<ffffffff8026ac1a>] do_IRQ+0x6b/0x75
[<ffffffff8025a3f1>] mwait_idle+0x0/0x4f
[<ffffffff80260644>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff80268e00>] prepare_to_copy+0x32/0x3b
[<ffffffff80268e04>] prepare_to_copy+0x36/0x3b
[<ffffffff80268e03>] prepare_to_copy+0x35/0x3b
[<ffffffff8026ee04>] mce_init+0x35/0xec
[<ffffffff8026ee00>] mce_init+0x31/0xec
[<ffffffff80268e00>] prepare_to_copy+0x32/0x3b
<repeats dozens of times>
[<ffffffff80268e00>] prepare_to_copy+0x32/0x3b
[<ffffffff8026ee00>] mce_init+0x31/0xec
[<ffffffff80268e00>] prepare_to_copy+0x32/0x3b
<repeats dozens of times>
[<ffffffff80268e00>] prepare_to_copy+0x32/0x3b
[<ffffffff80208e00>] __d_lookup+0xa0/0x140
[<ffffffff802a669f>] handle_bad_irq+0x0/0x1fd
[<ffffffff802a669f>] handle_bad_irq+0x0/0x1fd
<repeats dozens of times>
reuben
next prev parent reply other threads:[~2006-07-01 12:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20060630105401.2dc1d3f3.akpm@osdl.org>
[not found] ` <44A5C1D5.20200@reub.net>
[not found] ` <17573.50871.307879.557218@cse.unsw.edu.au>
[not found] ` <44A5D079.6070505@reub.net>
[not found] ` <17573.55937.866300.638738@cse.unsw.edu.au>
[not found] ` <44A6390E.1030608@reub.net>
[not found] ` <17574.15295.828980.278323@cse.unsw.edu.au>
[not found] ` <44A64BD8.90906@reub.net>
2006-07-01 10:51 ` Weird RAID/SATA problem [ once was Re: 2.6.17-mm3 ] Neil Brown
2006-07-01 11:38 ` Reuben Farrelly
2006-07-01 12:05 ` Neil Brown
2006-07-01 12:24 ` Reuben Farrelly [this message]
2006-07-01 13:28 ` Neil Brown
2006-07-02 0:03 ` Reuben Farrelly
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44A6696A.1010506@reub.net \
--to=reuben-lkml@reub.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.