From: Reuben Farrelly <reuben-lkml@reub.net>
To: Neil Brown <neilb@suse.de>
Cc: linux-kernel@vger.kernel.org, Andrew Morton <akpm@osdl.org>
Subject: Re: Weird RAID/SATA problem [ once was Re: 2.6.17-mm3 ]
Date: Sun, 02 Jul 2006 12:03:40 +1200 [thread overview]
Message-ID: <44A70D5C.6020700@reub.net> (raw)
In-Reply-To: <17574.30829.397932.205727@cse.unsw.edu.au>
On 2/07/2006 1:28 a.m., Neil Brown wrote:
> On Sunday July 2, reuben-lkml@reub.net wrote:
>> BUG: warning at drivers/md/md.c:411/super_written_barrier()
>>
>> Call Trace:
>> <IRQ> [<ffffffff80422231>] super_written_barrier+0x61/0x100
>> [<ffffffff8023c000>] bio_endio+0x5a/0x6a
>> [<ffffffff8022e24f>] __end_that_request_first+0x16f/0x4c9
>> [<ffffffff8024afaa>] end_that_request_first+0xc/0xe
>> [<ffffffff8034e825>] blk_ordered_complete_seq+0x7d/0x8c
>> [<ffffffff8034e864>] post_flush_end_io+0x30/0x35
>> [<ffffffff8034e748>] end_that_request_last+0xd8/0xf4
>> [<ffffffff803d83a1>] scsi_end_request+0xb1/0xdd
>> [<ffffffff803d87cd>] scsi_io_completion+0x3cd/0x3dc
>
> I think the key decision to return an error is happening here in
> scsi_io_completion.
> Pooring over a disassembly might help show here, but sticking in a
> bunch of printks is probably easier (for someone like me who has never
> seen this code before anyway :-)
>
> What does this patch produce?
>
> NeilBrown
>
> Signed-off-by: Neil Brown <neilb@suse.de>
>
>
> diff .prev/drivers/scsi/scsi_lib.c ./drivers/scsi/scsi_lib.c
> --- .prev/drivers/scsi/scsi_lib.c 2006-07-01 23:22:46.000000000 +1000
> +++ ./drivers/scsi/scsi_lib.c 2006-07-01 23:26:18.000000000 +1000
> @@ -952,6 +952,7 @@ void scsi_io_completion(struct scsi_cmnd
Loading ide-disk.ko module
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda10
md: sda10 has invalid sb, not importing!
md: invalid raid superblock magic on sdc10
md: sdc10 has invalid sb, not importing!
md: autorun ...
md: considering sdc11 ...
md: adding sdc11 ...
md: sdc7 has different UUID to sdc11
md: sdc6 has different UUID to sdc11
md: sdc5 has different UUID to sdc11
md: sdc3 has different UUID to sdc11
md: sdc2 has different UUID to sdc11
md: adding sda11 ...
md: sda7 has different UUID to sdc11
md: sda6 has different UUID to sdc11
md: sda5 has different UUID to sdc11
md: sda3 has different UUID to sdc11
md: sda2 has different UUID to sdc11
md: created md5
md: bind<sda11>
md: bind<sdc11>
md: running: <sdc11><sda11>
raid1: raid set md5 active with 2 out of 2 mirrors
md5: bitmap initialized from disk: read 10/10 pages, set 1 bits, status: 0
created bitmap (153 pages) for device md5
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 207 248 1 0
raid1: Disk failure on sda11, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 2 0 0 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
md: considering sdc7 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:0, dev:sda11
disk 1, wo:0, o:1, dev:sdc11
md: adding sdc7 ...
md: sdc6 has different UUID to sdc7
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdc11
md: sdc5 has different UUID to sdc7
md: sdc3 has different UUID to sdc7
md: sdc2 has different UUID to sdc7
md: adding sda7 ...
md: sda6 has different UUID to sdc7
md: sda5 has different UUID to sdc7
md: sda3 has different UUID to sdc7
md: sda2 has different UUID to sdc7
md: created md4
md: bind<sda7>
md: bind<sdc7>
md: running: <sdc7><sda7>
raid1: raid set md4 active with 2 out of 2 mirrors
md4: bitmap initialized from disk: read 4/4 pages, set 2 bits, status: 0
created bitmap (61 pages) for device md4
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
raid1: Disk failure on sda7, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 2 0 0 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
md: considering sdc6 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:0, dev:sda7
disk 1, wo:0, o:1, dev:sdc7
md: adding sdc6 ...
md: sdc5 has different UUID to sdc6
md: sdc3 has different UUID to sdc6
md: sdc2 has different UUID to sdc6
md: adding sda6 ...
md: sda5 has different UUID to sdc6
md: sda3 has different UUID to sdc6
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdc7
md: sda2 has different UUID to sdc6
md: created md3
md: bind<sda6>
md: bind<sdc6>
md: running: <sdc6><sda6>
raid1: raid set md3 active with 2 out of 2 mirrors
md3: bitmap initialized from disk: read 1/1 pages, set 1 bits, status: 0
created bitmap (13 pages) for device md3
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 143 248 1 0
raid1: Disk failure on sdc6, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
md: considering sdc5 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:0, o:1, dev:sda6
disk 1, wo:1, o:0, dev:sdc6
md: adding sdc5 ...
md: sdc3 has different UUID to sdc5
md: sdc2 has different UUID to sdc5
md: adding sda5 ...
md: sda3 has different UUID to sdc5
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:0, o:1, dev:sda6
md: sda2 has different UUID to sdc5
md: created md2
md: bind<sda5>
md: bind<sdc5>
md: running: <sdc5><sda5>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: bitmap initialized from disk: read 10/10 pages, set 16 bits, status: 0
created bitmap (150 pages) for device md2
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
raid1: Disk failure on sda5, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
md: considering sdc3 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:0, dev:sda5
disk 1, wo:0, o:1, dev:sdc5
md: adding sdc3 ...
md: sdc2 has different UUID to sdc3
md: adding sda3 ...
md: sda2 has different UUID to sdc3
md: created md1
md: bind<sda3>
md: bind<sdc3>
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdc5
md: running: <sdc3><sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: bitmap initialized from disk: read 10/10 pages, set 2 bits, status: 0
created bitmap (150 pages) for device md1
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 78 98 128 0
ouch. 0 0 0 143 248 1 0
raid1: Disk failure on sdc3, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 2 0 0 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
ouch. 0 0 0 207 248 1 0
md: considering sdc2 ...
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:0, o:1, dev:sda3
disk 1, wo:1, o:0, dev:sdc3
md: adding sdc2 ...
md: adding sda2 ...
md: created md0
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:0, o:1, dev:sda3
md: bind<sda2>
md: bind<sdc2>
md: running: <sdc2><sda2>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: bitmap initialized from disk: read 12/12 pages, set 100 bits, status: 0
created bitmap (187 pages) for device md0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 207 248 1 0
raid1: Disk failure on sda2, disabling device.
Operation continuing on 1 devices
ouch. 0 0 0 2 0 0 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
ouch. 0 0 0 143 248 1 0
md: ... autorun DONE.
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:0, dev:sda2
disk 1, wo:0, o:1, dev:sdc2
Creating root device.
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdc2
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /proc/bus/usb
ERROR unmounting old /proc/bus/usb: No such file or directory
forcing unmount of /proc/bus/usb
unmounting old /sys
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1151798137.896:2): selinux=0 auid=4294967295
INIT: version 2.86 booting
Welcome to Fedora Core
Press 'I' to enter interactive startup.
Setting clock (utc): Sun Jul 2 11:55:41 NZST 2006 [ OK ]
Starting udev: [ OK ]
Setting hostname tornado.reub.net: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 50/6024 files, 23798/24064 blocks (check in 3 mounts)
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling local swap partitions: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
sh-3.1#
sh-3.1#
sh-3.1# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdc3[2](F) sda3[0]
4891712 blocks [2/1] [U_]
bitmap: 1/150 pages [4KB], 16KB chunk
md2 : active raid1 sdc5[1] sda5[2](F)
4891648 blocks [2/1] [_U]
bitmap: 7/150 pages [28KB], 16KB chunk
md3 : active raid1 sdc6[2](F) sda6[0]
104320 blocks [2/1] [U_]
bitmap: 1/13 pages [4KB], 4KB chunk
md4 : active raid1 sdc7[1] sda7[2](F)
497856 blocks [2/1] [_U]
bitmap: 4/61 pages [16KB], 4KB chunk
md5 : active raid1 sdc11[1] sda11[2](F)
20008832 blocks [2/1] [_U]
bitmap: 1/153 pages [4KB], 64KB chunk
md0 : active raid1 sdc2[1] sda2[2](F)
24410688 blocks [2/1] [_U]
bitmap: 6/187 pages [24KB], 64KB chunk
unused devices: <none>
sh-3.1#
sh-3.1# mdadm --add /dev/md5 /dev/sda11
mdadm: Cannot open /dev/sda11: Device or resource busy
sh-3.1# mdadm --add /dev/md5 /dev/sdc11
mdadm: Cannot open /dev/sdc11: Device or resource busy
sh-3.1#
sh-3.1#
sh-3.1# mdadm --add /dev/md4 /dev/sda7
mdadm: Cannot open /dev/sda7: Device or resource busy
sh-3.1#
sh-3.1#
sh-3.1# mdadm --add /dev/md0 /dev/sda2
mdadm: Cannot open /dev/sda2: Device or resource busy
sh-3.1#
reuben
prev parent reply other threads:[~2006-07-02 0:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20060630105401.2dc1d3f3.akpm@osdl.org>
[not found] ` <44A5C1D5.20200@reub.net>
[not found] ` <17573.50871.307879.557218@cse.unsw.edu.au>
[not found] ` <44A5D079.6070505@reub.net>
[not found] ` <17573.55937.866300.638738@cse.unsw.edu.au>
[not found] ` <44A6390E.1030608@reub.net>
[not found] ` <17574.15295.828980.278323@cse.unsw.edu.au>
[not found] ` <44A64BD8.90906@reub.net>
2006-07-01 10:51 ` Weird RAID/SATA problem [ once was Re: 2.6.17-mm3 ] Neil Brown
2006-07-01 11:38 ` Reuben Farrelly
2006-07-01 12:05 ` Neil Brown
2006-07-01 12:24 ` Reuben Farrelly
2006-07-01 13:28 ` Neil Brown
2006-07-02 0:03 ` Reuben Farrelly [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44A70D5C.6020700@reub.net \
--to=reuben-lkml@reub.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.