U-boot on ML403

U-boot on ML403

[Ming Liu]

Dear Frank,
I know you are using U-boot on ML403 now. So can you say something about 
how to configure U-boot as ML403 board? I noticed that in U-boot 1.1.4, 
there is only ML300 supported. So if I want to configure the board as ML403 
and some other customed options(e.g. no EEPROM), what shall I do? Thanks 
for your help.

Regards
Ming

_________________________________________________________________
免费下载 MSN Explorer:   http://explorer.msn.com/lccn  

Re: U-boot on ML403

[Frank D Lombardo]

Ming Liu wrote:
> Dear Frank,
> I know you are using U-boot on ML403 now. So can you say something
> about how to configure U-boot as ML403 board? I noticed that in U-boot
> 1.1.4, there is only ML300 supported. So if I want to configure the
> board as ML403 and some other customed options(e.g. no EEPROM), what
> shall I do? Thanks for your help.
>
> Regards
> Ming
>

Ming,

I received an updated version of the Xilinx xapp542 directly from
Xilinx. We had to sign a non-disclosure agreement before they would send
it to me. This update provided the necessary pieces to allow XPS to
generate a U-Boot "BSP" and a modified U-Boot tree with support for
additional mlXXX boards.

I would recommend contacting Xilinx for this. Sorry I can't be of
greater assistance.

Frank

Re: U-boot on ML403

[Ming Liu]

Dear Frank,
So you mean, you built your ML403 system with U-Boot supported according to 
the updated version of xapp542, right? There are NOT some patches open to 
everyone to include ML403 support into the U-Boot tree, right? 

If both answers for the two questions are yes, then I have to contact 
Xilinx to ask for help. Anyway, thanks for your information and reply. 

Regards
Ming


>From: Frank D Lombardo <lombardo@mdivac.com>
>To: Ming Liu <eemingliu@hotmail.com>
>CC: linuxppc-embedded@ozlabs.org
>Subject: Re: U-boot on ML403
>Date: Fri, 11 Aug 2006 11:14:23 -0400
>
>Ming Liu wrote:
> > Dear Frank,
> > I know you are using U-boot on ML403 now. So can you say something
> > about how to configure U-boot as ML403 board? I noticed that in U-boot
> > 1.1.4, there is only ML300 supported. So if I want to configure the
> > board as ML403 and some other customed options(e.g. no EEPROM), what
> > shall I do? Thanks for your help.
> >
> > Regards
> > Ming
> >
>
>Ming,
>
>I received an updated version of the Xilinx xapp542 directly from
>Xilinx. We had to sign a non-disclosure agreement before they would send
>it to me. This update provided the necessary pieces to allow XPS to
>generate a U-Boot "BSP" and a modified U-Boot tree with support for
>additional mlXXX boards.
>
>I would recommend contacting Xilinx for this. Sorry I can't be of
>greater assistance.
>
>Frank
>

_________________________________________________________________
与联机的朋友进行交流，请使用 MSN Messenger:  http://messenger.msn.com/cn  

Re: U-boot on ML403

[Frank D Lombardo]

Ming Liu wrote:
> Dear Frank,
> So you mean, you built your ML403 system with U-Boot supported
> according to the updated version of xapp542, right? There are NOT some
> patches open to everyone to include ML403 support into the U-Boot
> tree, right?
> If both answers for the two questions are yes, then I have to contact
> Xilinx to ask for help. Anyway, thanks for your information and reply.
> Regards
> Ming
>
>
>
Ming,

There may be public patches available, but I don't know where to obtain
them. I used the patches from Xilinx.

Frank

Re: U-boot on ML403

[Ming Liu]

Dear Frank,
OK then. 

I have tried to find the patch. But I failed. So maybe it's better to 
contact Xilinx.

Thanks for your help anyway.

Regards
Ming


>From: Frank D Lombardo <lombardo@mdivac.com>
>To: Ming Liu <eemingliu@hotmail.com>
>CC: linuxppc-embedded@ozlabs.org
>Subject: Re: U-boot on ML403
>Date: Fri, 11 Aug 2006 11:39:59 -0400
>
>Ming Liu wrote:
> > Dear Frank,
> > So you mean, you built your ML403 system with U-Boot supported
> > according to the updated version of xapp542, right? There are NOT some
> > patches open to everyone to include ML403 support into the U-Boot
> > tree, right?
> > If both answers for the two questions are yes, then I have to contact
> > Xilinx to ask for help. Anyway, thanks for your information and reply.
> > Regards
> > Ming
> >
> >
> >
>Ming,
>
>There may be public patches available, but I don't know where to obtain
>them. I used the patches from Xilinx.
>
>Frank

_________________________________________________________________
与联机的朋友进行交流，请使用 MSN Messenger:  http://messenger.msn.com/cn