gMFSK Ptt

gMFSK Ptt

[Michel Beaudry]

Hi all,

I installed and compiled gmfsk.hkj.51 on Debian testing.
The program works ok except for the parallel port ptt

I now get the error message device parport0 is not a serial port.

Before I was using gmfsk-0.7pre1 on the same machine and the parallel
port worked fine.
I use the serial port for hamlib.

What am I missing to get the parallel port working ?

thanks,
Michel
ve2bcw

Re: gMFSK Ptt

[walter harms]

hi michel,
no idea what the problem is but there is a problem
when you load the lp and parport module.
perhaps if you 'rmmod lp' you have a better change.

re,
  wh


Michel Beaudry wrote:
> Hi all,
> 
> I installed and compiled gmfsk.hkj.51 on Debian testing.
> The program works ok except for the parallel port ptt
> 
> I now get the error message device parport0 is not a serial port.
> 
> Before I was using gmfsk-0.7pre1 on the same machine and the parallel
> port worked fine.
> I use the serial port for hamlib.
> 
> What am I missing to get the parallel port working ?
> 
> thanks,
> Michel
> ve2bcw
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

Re: gMFSK Ptt

[Michel Beaudry]

Thanks for the reply Walter,

The lp module is not loaded, I tried load and unload the parport
module but always with the same results.
I re-installed the original version of gmfsk and it works fine with
the parallel port.
Must be something with  gmfsk.hkj.51 or the way i compiled it.

73,
Michel
ve2bcw

> hi michel,
> no idea what the problem is but there is a problem
> when you load the lp and parport module.
> perhaps if you 'rmmod lp' you have a better change.
>
> re,
>   wh
>
>
> Michel Beaudry wrote:
> > Hi all,
> >
> > I installed and compiled gmfsk.hkj.51 on Debian testing.
> > The program works ok except for the parallel port ptt
> >
> > I now get the error message device parport0 is not a serial port.
> >
> > Before I was using gmfsk-0.7pre1 on the same machine and the parallel
> > port worked fine.
> > I use the serial port for hamlib.
> >
> > What am I missing to get the parallel port working ?
> >
> > thanks,
> > Michel
> > ve2bcw
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> >
>