* [PATCH] [DOC] ips.changelog 1/2 update and cleanup
@ 2006-08-21 18:50 Henne
0 siblings, 0 replies; only message in thread
From: Henne @ 2006-08-21 18:50 UTC (permalink / raw)
To: ipslinux; +Cc: linux-kernel, linux-scsi
From: Henrik Kretzschmar <henne@nachtwindheim.de>
Brings the changelog of the scsi ips.c up-to-date and replaces
whitespaces with tabs.
old filesize: 5304 Bytes
new filesize: 4774 Bytes
Signed-off-by: Henrik Kretzschmar <henne@achtwindheim.de>
---
--- linux-2.6.18-rc4/Documentation/scsi/ChangeLog.ips 2006-06-18 03:49:35.000000000 +0200
+++ linux/Documentation/scsi/ChangeLog.ips 2006-08-20 21:27:22.000000000 +0200
@@ -1,122 +1,141 @@
IBM ServeRAID driver Change Log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 7.12.05 - remove version matching per IBM request
- 5.00.01 - Sarasota ( 5i ) adapters must always be scanned first
- - Get rid on IOCTL_NEW_COMMAND code
- - Add Extended DCDB Commands for Tape Support in 5I
-
- 4.90.11 - Don't actually RESET unless it's physically required
- - Remove unused compile options
-
- 4.90.08 - Data Corruption if First Scatter Gather Element is > 64K
-
- 4.90.08 - Increase Delays in Flashing ( Trombone Only - 4H )
-
- 4.90.05 - Use New PCI Architecture to facilitate Hot Plug Development
-
- 4.90.01 - Add ServeRAID Version Checking
-
- 4.80.26 - Clean up potential code problems ( Arjan's recommendations )
-
- 4.80.21 - Change memcpy() to copy_to_user() in NVRAM Page 5 IOCTL path
-
- 4.80.20 - Set max_sectors in Scsi_Host structure ( if >= 2.4.7 kernel )
- - 5 second delay needed after resetting an i960 adapter
-
- 4.80.14 - Take all semaphores off stack
- - Clean Up New_IOCTL path
-
- 4.80.04 - Eliminate calls to strtok() if 2.4.x or greater
- - Adjustments to Device Queue Depth
-
- 4.80.00 - Make ia64 Safe
-
- 4.72.01 - I/O Mapped Memory release ( so "insmod ips" does not Fail )
- - Don't Issue Internal FFDC Command if there are Active Commands
- - Close Window for getting too many IOCTL's active
-
- 4.72.00 - Allow for a Scatter-Gather Element to exceed MAX_XFER Size
-
- 4.71.00 - Change all memory allocations to not use GFP_DMA flag
- - Code Clean-Up for 2.4.x kernel
-
- 4.70.15 - Fix Breakup for very large ( non-SG ) requests
-
- 4.70.13 - Don't release HA Lock in ips_next() until SC taken off queue
- - Unregister SCSI device in ips_release()
- - Don't Send CDB's if we already know the device is not present
-
- 4.70.12 - Corrective actions for bad controller ( during initialization )
-
- 4.70.09 - Use a Common ( Large Buffer ) for Flashing from the JCRM CD
- - Add IPSSEND Flash Support
- - Set Sense Data for Unknown SCSI Command
- - Use Slot Number from NVRAM Page 5
- - Restore caller's DCDB Structure
-
- 4.20.14 - Update patch files for kernel 2.4.0-test5
-
- 4.20.13 - Fix some failure cases / reset code
- - Hook into the reboot_notifier to flush the controller
- cache
-
- 4.20.03 - Rename version to coincide with new release schedules
- - Performance fixes
- - Fix truncation of /proc files with cat
- - Merge in changes through kernel 2.4.0test1ac21
-
- 4.10.13 - Fix for dynamic unload and proc file system
-
- 4.10.00 - Add support for ServeRAID 4M/4L
-
- 4.00.06 - Fix timeout with initial FFDC command
-
- 4.00.05 - Remove wish_block from init routine
- - Use linux/spinlock.h instead of asm/spinlock.h for kernels
- 2.3.18 and later
- - Sync with other changes from the 2.3 kernels
-
- 4.00.04 - Rename structures/constants to be prefixed with IPS_
-
- 4.00.03 - Add alternative passthru interface
- - Add ability to flash ServeRAID BIOS
-
- 4.00.02 - Fix problem with PT DCDB with no buffer
-
- 4.00.01 - Add support for First Failure Data Capture
-
- 4.00.00 - Add support for ServeRAID 4
-
- 3.60.02 - Make DCDB direction based on lookup table.
- - Only allow one DCDB command to a SCSI ID at a time.
-
- 3.60.01 - Remove bogus error check in passthru routine.
-
- 3.60.00 - Bump max commands to 128 for use with ServeRAID
- firmware 3.60.
- - Change version to 3.60 to coincide with ServeRAID release
+ 7.12.xx - use STATIC functions whereever possible
+ - clean up deprecated MODULE_PARM calls
+
+ 7.10.18 - add highmem_io flag in SCSI template for 2.4 kernels
+ - fix path/name for scsi_hosts.h include for 2.6 kernels
+ - fix sort order of 7k
+ - remove 3 unused inline functions
+
+ 6.11.xx - make logicial drive info structure safe for DMA DDTS 60639
+
+ 6.11.xx - get VersionInfo buffer off the stack! DDTS 60401
+
+ 6.10.00 - remove 1G addressing limitations
+
+ 6.00.00 - add 6x adapters and battery flash
+
+ 5.30.00 - use devexit_p()
+
+ 5.10.15 - remove unused code (sem, macros, etc.)
+
+ 5.10.12 - use pci_dma interface, update for 2.5 kernel changes
+
+ 5.00.01 - Sarasota ( 5i ) adapters must always be scanned first
+ - Get rid on IOCTL_NEW_COMMAND code
+ - Add Extended DCDB Commands for Tape Support in 5I
+
+ 4.90.11 - Don't actually RESET unless it's physically required
+ - Remove unused compile options
+
+ 4.90.08 - Data Corruption if First Scatter Gather Element is > 64K
+
+ 4.90.08 - Increase Delays in Flashing ( Trombone Only - 4H )
+
+ 4.90.05 - Use New PCI Architecture to facilitate Hot Plug Development
+
+ 4.90.01 - Add ServeRAID Version Checking
+
+ 4.80.26 - Clean up potential code problems ( Arjan's recommendations )
+
+ 4.80.21 - Change memcpy() to copy_to_user() in NVRAM Page 5 IOCTL path
+
+ 4.80.20 - Set max_sectors in Scsi_Host structure ( if >= 2.4.7 kernel )
+ - 5 second delay needed after resetting an i960 adapter
+
+ 4.80.14 - Take all semaphores off stack
+ - Clean Up New_IOCTL path
+
+ 4.80.04 - Eliminate calls to strtok() if 2.4.x or greater
+ - Adjustments to Device Queue Depth
+
+ 4.80.00 - Make ia64 Safe
+
+ 4.72.01 - I/O Mapped Memory release ( so "insmod ips" does not Fail )
+ - Don't Issue Internal FFDC Command if there are Active Commands
+ - Close Window for getting too many IOCTL's active
+
+ 4.72.00 - Allow for a Scatter-Gather Element to exceed MAX_XFER Size
+
+ 4.71.00 - Change all memory allocations to not use GFP_DMA flag
+ - Code Clean-Up for 2.4.x kernel
+
+ 4.70.15 - Fix Breakup for very large ( non-SG ) requests
+
+ 4.70.13 - Don't release HA Lock in ips_next() until SC taken off queue
+ - Unregister SCSI device in ips_release()
+ - Don't Send CDB's if we already know the device is not present
+
+ 4.70.12 - Corrective actions for bad controller (during initialization)
+
+ 4.70.09 - Use a Common (Large Buffer) for Flashing from the JCRM CD
+ - Add IPSSEND Flash Support
+ - Set Sense Data for Unknown SCSI Command
+ - Use Slot Number from NVRAM Page 5
+ - Restore caller's DCDB Structure
+
+ 4.20.14 - Update patch files for kernel 2.4.0-test5
+
+ 4.20.13 - Fix some failure cases / reset code
+ - Hook into the reboot_notifier to flush the controller cache
+
+ 4.20.03 - Rename version to coincide with new release schedules
+ - Performance fixes
+ - Fix truncation of /proc files with cat
+ - Merge in changes through kernel 2.4.0test1ac21
+
+ 4.10.13 - Fix for dynamic unload and proc file system
+
+ 4.10.00 - Add support for ServeRAID 4M/4L
+
+ 4.00.06 - Fix timeout with initial FFDC command
+
+ 4.00.05 - Remove wish_block from init routine
+ - Use linux/spinlock.h instead of asm/spinlock.h for kernels
+ 2.3.18 and later
+ - Sync with other changes from the 2.3 kernels
+
+ 4.00.04 - Rename structures/constants to be prefixed with IPS_
+
+ 4.00.03 - Add alternative passthru interface
+ - Add ability to flash ServeRAID BIOS
+
+ 4.00.02 - Fix problem with PT DCDB with no buffer
+
+ 4.00.01 - Add support for First Failure Data Capture
+
+ 4.00.00 - Add support for ServeRAID 4
+
+ 3.60.02 - Make DCDB direction based on lookup table.
+ - Only allow one DCDB command to a SCSI ID at a time.
+
+ 3.60.01 - Remove bogus error check in passthru routine.
+
+ 3.60.00 - Bump max commands to 128 for use with ServeRAID firmware 3.60.
+ - Change version to 3.60 to coincide with ServeRAID release
numbering.
- 1.00.00 - Initial Public Release
- - Functionally equivalent to 0.99.05
+ 1.00.00 - Initial Public Release
+ - Functionally equivalent to 0.99.05
- 0.99.05 - Fix an oops on certain passthru commands
+ 0.99.05 - Fix an oops on certain passthru commands
- 0.99.04 - Fix race condition in the passthru mechanism
- -- this required the interface to the utilities to change
- - Fix error recovery code
-
- 0.99.03 - Make interrupt routine handle all completed request on the
- adapter not just the first one
- - Make sure passthru commands get woken up if we run out of
- SCBs
- - Send all of the commands on the queue at once rather than
+ 0.99.04 - Fix race condition in the passthru mechanism -- this required
+ the interface to the utilities to change
+ - Fix error recovery code
+
+ 0.99.03 - Make interrupt routine handle all completed request on the
+ adapter not just the first one
+ - Make sure passthru commands get woken up if we run out of SCBs
+ - Send all of the commands on the queue at once rather than
one at a time since the card will support it.
- 0.99.02 - Added some additional debug statements to print out
- errors if an error occurs while trying to read/write
- to a logical drive (IPS_DEBUG).
+ 0.99.02 - Added some additional debug statements to print out
+ errors if an error occurs while trying to read/write
+ to a logical drive (IPS_DEBUG).
- - Fixed read/write errors when the adapter is using an
+ - Fixed read/write errors when the adapter is using an
8K stripe size.
-
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-08-21 18:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-08-21 18:50 [PATCH] [DOC] ips.changelog 1/2 update and cleanup Henne
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.