All of lore.kernel.org
 help / color / mirror / Atom feed
From: Venkat Yekkirala <vyekkirala@TrustedCS.com>
To: netdev@vger.kernel.org
Cc: selinux@tycho.nsa.gov, jmorris@namei.org, sds@tycho.nsa.gov,
	paul.moore@hp.com
Subject: [PATCH 1/7] secid reconciliation-v03
Date: Thu, 28 Sep 2006 21:32:50 -0500	[thread overview]
Message-ID: <451C85D2.8020506@trustedcs.com> (raw)

This patchset helps one leverage secmark in defining fine-grained security
check points with support for a. a default place holder domain defined using
secmark for each of the check points and b. flow control and reconciliation
of domains entering/leaving the system.

The reconciliation steps for SELinux are explained in the Labeled Networking
document at:
http://marc.theaimsgroup.com/?l=linux-netdev&m=115136637800361&w=2
with the change that SELinux transition rules are used when available
to arrive at the new secid.

Also please refer to the discussion at:
http://marc.theaimsgroup.com/?l=selinux&m=115885031311565&w=2

The following are the identifiers handled here:

1. secmark on the skb
2. xfrm security identifier associated with the skb if it used any xfrms,
 a zero secid otherwise.

This patch: Add new flask definitions to SELinux

Adds a new avperm "flow_in" to arbitrate among the identifiers on the
inbound (input/forward). Also adds a new avperm "flow_out" to enable flow
control checks on the outbound (output/forward), addressed in this patch
as well.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
---
 security/selinux/include/av_perm_to_string.h |    2 ++
 security/selinux/include/av_permissions.h    |    2 ++
 2 files changed, 4 insertions(+)

diff --git a/security/selinux/include/av_perm_to_string.h b/security/selinux/include/av_perm_to_string.h
index 09fc8a2..1e65d28 100644
--- a/security/selinux/include/av_perm_to_string.h
+++ b/security/selinux/include/av_perm_to_string.h
@@ -245,6 +245,8 @@
    S_(SECCLASS_PACKET, PACKET__SEND, "send")
    S_(SECCLASS_PACKET, PACKET__RECV, "recv")
    S_(SECCLASS_PACKET, PACKET__RELABELTO, "relabelto")
+   S_(SECCLASS_PACKET, PACKET__FLOW_IN, "flow_in")
+   S_(SECCLASS_PACKET, PACKET__FLOW_OUT, "flow_out")
    S_(SECCLASS_KEY, KEY__VIEW, "view")
    S_(SECCLASS_KEY, KEY__READ, "read")
    S_(SECCLASS_KEY, KEY__WRITE, "write")
diff --git a/security/selinux/include/av_permissions.h b/security/selinux/include/av_permissions.h
index 81f4f52..2faf3d8 100644
--- a/security/selinux/include/av_permissions.h
+++ b/security/selinux/include/av_permissions.h
@@ -962,6 +962,8 @@ #define APPLETALK_SOCKET__NAME_BIND     
 #define PACKET__SEND                              0x00000001UL
 #define PACKET__RECV                              0x00000002UL
 #define PACKET__RELABELTO                         0x00000004UL
+#define PACKET__FLOW_IN                           0x00000008UL
+#define PACKET__FLOW_OUT                          0x00000010UL
 
 #define KEY__VIEW                                 0x00000001UL
 #define KEY__READ                                 0x00000002UL

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

WARNING: multiple messages have this Message-ID (diff)
From: Venkat Yekkirala <vyekkirala@trustedcs.com>
To: netdev@vger.kernel.org
Cc: selinux@tycho.nsa.gov, jmorris@namei.org, sds@tycho.nsa.gov,
	paul.moore@hp.com
Subject: [PATCH 1/7] secid reconciliation-v03
Date: Thu, 28 Sep 2006 21:32:50 -0500	[thread overview]
Message-ID: <451C85D2.8020506@trustedcs.com> (raw)

This patchset helps one leverage secmark in defining fine-grained security
check points with support for a. a default place holder domain defined using
secmark for each of the check points and b. flow control and reconciliation
of domains entering/leaving the system.

The reconciliation steps for SELinux are explained in the Labeled Networking
document at:
http://marc.theaimsgroup.com/?l=linux-netdev&m=115136637800361&w=2
with the change that SELinux transition rules are used when available
to arrive at the new secid.

Also please refer to the discussion at:
http://marc.theaimsgroup.com/?l=selinux&m=115885031311565&w=2

The following are the identifiers handled here:

1. secmark on the skb
2. xfrm security identifier associated with the skb if it used any xfrms,
 a zero secid otherwise.

This patch: Add new flask definitions to SELinux

Adds a new avperm "flow_in" to arbitrate among the identifiers on the
inbound (input/forward). Also adds a new avperm "flow_out" to enable flow
control checks on the outbound (output/forward), addressed in this patch
as well.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
---
 security/selinux/include/av_perm_to_string.h |    2 ++
 security/selinux/include/av_permissions.h    |    2 ++
 2 files changed, 4 insertions(+)

diff --git a/security/selinux/include/av_perm_to_string.h b/security/selinux/include/av_perm_to_string.h
index 09fc8a2..1e65d28 100644
--- a/security/selinux/include/av_perm_to_string.h
+++ b/security/selinux/include/av_perm_to_string.h
@@ -245,6 +245,8 @@
    S_(SECCLASS_PACKET, PACKET__SEND, "send")
    S_(SECCLASS_PACKET, PACKET__RECV, "recv")
    S_(SECCLASS_PACKET, PACKET__RELABELTO, "relabelto")
+   S_(SECCLASS_PACKET, PACKET__FLOW_IN, "flow_in")
+   S_(SECCLASS_PACKET, PACKET__FLOW_OUT, "flow_out")
    S_(SECCLASS_KEY, KEY__VIEW, "view")
    S_(SECCLASS_KEY, KEY__READ, "read")
    S_(SECCLASS_KEY, KEY__WRITE, "write")
diff --git a/security/selinux/include/av_permissions.h b/security/selinux/include/av_permissions.h
index 81f4f52..2faf3d8 100644
--- a/security/selinux/include/av_permissions.h
+++ b/security/selinux/include/av_permissions.h
@@ -962,6 +962,8 @@ #define APPLETALK_SOCKET__NAME_BIND     
 #define PACKET__SEND                              0x00000001UL
 #define PACKET__RECV                              0x00000002UL
 #define PACKET__RELABELTO                         0x00000004UL
+#define PACKET__FLOW_IN                           0x00000008UL
+#define PACKET__FLOW_OUT                          0x00000010UL
 
 #define KEY__VIEW                                 0x00000001UL
 #define KEY__READ                                 0x00000002UL

             reply	other threads:[~2006-09-29  2:32 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-09-29  2:32 Venkat Yekkirala [this message]
2006-09-29  2:32 ` [PATCH 1/7] secid reconciliation-v03 Venkat Yekkirala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=451C85D2.8020506@trustedcs.com \
    --to=vyekkirala@trustedcs.com \
    --cc=jmorris@namei.org \
    --cc=netdev@vger.kernel.org \
    --cc=paul.moore@hp.com \
    --cc=sds@tycho.nsa.gov \
    --cc=selinux@tycho.nsa.gov \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.