* [lm-sensors] Wrong sensors order for MSI K8MM-V (MS7142),
@ 2006-10-09 13:28 Mgr. Peter Tuharsky
2006-10-09 13:31 ` Mgr. Peter Tuharsky
0 siblings, 1 reply; 2+ messages in thread
From: Mgr. Peter Tuharsky @ 2006-10-09 13:28 UTC (permalink / raw)
To: lm-sensors
Hallo
I'm posting my experience with sensors in order to make DB more
accurate, so that less experienced users could gain the sensors give
good results automatically, without need of tackling the sensors.conf
This is the result from MSI K8MM-V (MS7142), chipset VIA K8M800-CE + VIA
VT8237R.
-Note the temp3 (probably should be CPU)
-VCore +1.55V is probably suitable for Athlon64 2800+ and the 1.94 is
really out of order
-12V is between the interval limits, however ALARM is signalised. Maybe
MIN and MAX values should be switched!
-CPU temp should be OK if bellow 70C
Please, if You need more info, or am I on wrong address, let me know and
I'll do what I can.
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.55 V (min = +1.94 V, max = +1.94 V) ALARM
+12V: +11.80 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.25 V (min = +3.14 V, max = +3.47 V)
+5V: +4.93 V (min = +4.75 V, max = +5.25 V)
-12V: -11.78 V (min = -10.80 V, max = -13.18 V) ALARM
V5SB: +4.95 V (min = +4.76 V, max = +5.24 V)
VBat: +3.50 V (min = +2.40 V, max = +3.60 V)
CPU Fan: 0 RPM (min = -1 RPM, div = 2) ALARM
fan3: 0 RPM (min = 6750 RPM, div = 2) ALARM
M/B Temp: +47?C (high = +1?C, hyst = +0?C) sensor thermistor ALARM
CPU Temp: +52.5?C (high = +60?C, hyst = +55?C) sensor = thermistor
temp3: +68.5?C (high = +60?C, hyst = +55?C) sensor thermistor ALARM
vid: -0.025 V (VRM Version 2.4)
alarms:
beep_enable:
Sound alarm enabled
^ permalink raw reply [flat|nested] 2+ messages in thread
* [lm-sensors] Wrong sensors order for MSI K8MM-V (MS7142),
2006-10-09 13:28 [lm-sensors] Wrong sensors order for MSI K8MM-V (MS7142), Mgr. Peter Tuharsky
@ 2006-10-09 13:31 ` Mgr. Peter Tuharsky
0 siblings, 0 replies; 2+ messages in thread
From: Mgr. Peter Tuharsky @ 2006-10-09 13:31 UTC (permalink / raw)
To: lm-sensors
Hallo
I'm posting my experience with sensors in order to make DB more
accurate, so that less experienced users could gain the sensors give
good results automatically, without need of tackling the sensors.conf
This is the result from MSI K8MM-V (MS7142), chipset VIA K8M800-CE + VIA
VT8237R.
-Note the temp3 (probably should be CPU)
-VCore +1.55V is probably suitable for Athlon64 2800+ and the 1.94 is
really out of order
-12V is between the interval limits, however ALARM is signalised. Maybe
MIN and MAX values should be switched!
-CPU temp should be OK if bellow 70C
Please, if You need more info, or am I on wrong address, let me know and
I'll do what I can.
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.55 V (min = +1.94 V, max = +1.94 V) ALARM
+12V: +11.80 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.25 V (min = +3.14 V, max = +3.47 V)
+5V: +4.93 V (min = +4.75 V, max = +5.25 V)
-12V: -11.78 V (min = -10.80 V, max = -13.18 V) ALARM
V5SB: +4.95 V (min = +4.76 V, max = +5.24 V)
VBat: +3.50 V (min = +2.40 V, max = +3.60 V)
CPU Fan: 0 RPM (min = -1 RPM, div = 2) ALARM
fan3: 0 RPM (min = 6750 RPM, div = 2) ALARM
M/B Temp: +47?C (high = +1?C, hyst = +0?C) sensor thermistor ALARM
CPU Temp: +52.5?C (high = +60?C, hyst = +55?C) sensor = thermistor
temp3: +68.5?C (high = +60?C, hyst = +55?C) sensor thermistor ALARM
vid: -0.025 V (VRM Version 2.4)
alarms:
beep_enable:
Sound alarm enabled
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-10-09 13:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-09 13:28 [lm-sensors] Wrong sensors order for MSI K8MM-V (MS7142), Mgr. Peter Tuharsky
2006-10-09 13:31 ` Mgr. Peter Tuharsky
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.