All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Mateusz Mielnicki" <matim@wp.pl>
To: Pallipadi Venkatesh <venkatesh.pallipadi@intel.com>
Cc: cpufreq <cpufreq@lists.linux.org.uk>,
	Dominik Brodowski <linux@dominikbrodowski.net>
Subject: Odp: RE: Intel T2250
Date: Thu, 26 Oct 2006 20:58:22 +0200	[thread overview]
Message-ID: <4541054e17553@wp.pl> (raw)
In-Reply-To: <EB12A50964762B4D8111D55B764A8454C966B1@scsmsx413.amr.corp.intel.com>

With acpi-cpufreq it is as below:

MatiM matim # modprobe acpi_cpufreq
MatiM matim # modprobe cpufreq_stats
MatiM matim # modprobe cpufreq_powersave
MatiM matim # modprobe cpufreq_ondemand
MatiM matim # modprobe cpufreq_userspace
MatiM matim # modprobe cpufreq_conservative
MatiM matim # lsmod
Module                  Size  Used by
cpufreq_conservative     6152  0
cpufreq_userspace       3816  0
cpufreq_ondemand        5324  0
cpufreq_powersave       1728  0
cpufreq_stats           4748  0
acpi_cpufreq            6868  0
freq_table              4744  2 cpufreq_stats,acpi_cpufreq
snd_pcm_oss            38688  0
snd_mixer_oss          14208  2 snd_pcm_oss
i915                   17152  2
usbhid                 30916  0
snd_hda_intel          13972  2
snd_hda_codec         146112  1 snd_hda_intel
thermal                10760  0
processor              22712  2 acpi_cpufreq,thermal
battery                 7620  0
ac                      3588  0
MatiM matim #
MatiM matim # cpufreq-info
cpufrequtils 001: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to linux@brodo.de, please.
analyzing CPU 0:
  no or unknown cpufreq driver is active on this CPU
analyzing CPU 1:
  no or unknown cpufreq driver is active on this CPU
MatiM matim # ls /sys/devices/system/cpu/cpu*
/sys/devices/system/cpu/cpu0:
cache  topology

/sys/devices/system/cpu/cpu1:
cache  online  topology
MatiM matim # /etc/init.d/cpufrequtils start
 * Enabling ondemand cpufreq governor ...  [ !! ]unknown or unhandled CPU?
MatiM matim #

------------------------------------------
Only difference I see is "online" in second processor directory.

MatiM proc # ls -l /proc/cpufreq
ls: /proc/cpufreq: Nie ma takiego pliku ani katalogu
MatiM proc #

-----------------------------------------
But I also found:

MatiM CPU0 # cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T0
states:
   *T0:                  00%
    T1:                  12%
    T2:                  25%
    T3:                  37%
    T4:                  50%
    T5:                  62%
    T6:                  75%
    T7:                  87%
MatiM CPU0 #


Any guess?

Thanks
Mateusz


Dnia 26-10-2006 o godz. 19:48 Pallipadi Venkatesh napisa³(a):
> 
> Can you try the same thing with 'modprobe acpi-cpufreq' instead of 
> 'modprobe speedstep-centrino' in first line below.
> 
> Thanks,
> Venki 
> 
> >-----Original Message-----
> >From: cpufreq-bounces@lists.linux.org.uk 
> >[mailto:cpufreq-bounces@lists.linux.org.uk] On Behalf Of 
> >Mateusz Mielnicki
> >Sent: Thursday, October 26, 2006 10:38 AM
> >To: Dominik Brodowski
> >Cc: cpufreq
> >Subject: Re: Intel T2250
> >
> >Well, I don't think so... sadly.
> >
> >This is what I get in console:
> >
> >MatiM matim # modprobe speedstep-centrino
> >FATAL: Error inserting speedstep_centrino 
> >(/lib/modules/2.6.17-gentoo-r8-w/kernel/arch/i386/kernel/cpu/cp
> >ufreq/speedstep-centrino.ko): No such device
> >MatiM matim # modprobe cpufreq_userspace
> >MatiM matim # modprobe cpufreq_powersave
> >MatiM matim # modprobe cpufreq_ondemand
> >MatiM matim # modprobe cpufreq_conservative
> >MatiM matim # cpufreq-info
> >cpufrequtils 001: cpufreq-info (C) Dominik Brodowski 2004-2006
> >Report errors and bugs to linux@brodo.de, please.
> >analyzing CPU 0:
> >  no or unknown cpufreq driver is active on this CPU
> >analyzing CPU 1:
> >  no or unknown cpufreq driver is active on this CPU
> >MatiM matim #
> >MatiM matim # ls /sys/devices/system/cpu/cpu*
> >/sys/devices/system/cpu/cpu0:
> >cache  topology
> >
> >/sys/devices/system/cpu/cpu1:
> >cache  topology
> >MatiM matim #
> >MatiM matim # /etc/init.d/cpufrequtils start
> > * Enabling ondemand cpufreq governor ...  [ !! ]unknown or 
> >unhandled CPU?
> >MatiM matim #
> >
> >
> >As you can see there is nothing that would say it is working...
> >Is my processor T2250 really supported? I saw that 
> >speedstep-centrino contains clock and voltage information of 
> >certain processor's, and this one is not even mentioned on 
> >intel's page. What can I do with it ?
> >Mateusz
> >
> >
> >Dnia 26-10-2006 o godz. 4:34 Dominik Brodowski napisa³(a):
> >> On Thu, Oct 19, 2006 at 09:54:42AM +0200, Mateusz Mielnicki wrote:
> >> > Yes, every module of cpufreq loads, acpi-cpufreq, 
> >cpufreq_powersave,
> >> > cpufreq_conservative, freq_table and so on, excepting 
> >speedstep-centrino
> >> > which gives "No such device".
> >> 
> >> Well, this means that speedstep is working just fine; it uses the
> >> (preferred) acpi-cpufreq module.
> >> 
> >> 	Dominik
> >> 
> >
> >
> >----------------------------------------------------
> >Nowa Gra Zakrêcone Dynie - sprwd¼ i kliknij:
> >http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd2
> >4.html&sid=911
> >Czy zakrêcisz nimi jeszcze bardziej i zbijesz wszystkie z planszy?
> >
> >
> >
> >_______________________________________________
> >Cpufreq mailing list
> >Cpufreq@lists.linux.org.uk
> >http://lists.linux.org.uk/mailman/listinfo/cpufreq
> >
> 


----------------------------------------------------
Trzy wesela... i niez³y cyrk: brytyjska komedia "Confetti" 
- przebój Warszawskiego Festiwalu Filmowego: w kinach!
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fconfetti.html&sid=912

  reply	other threads:[~2006-10-26 18:58 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-10-26 17:48 Intel T2250 Pallipadi, Venkatesh
2006-10-26 18:58 ` Mateusz Mielnicki [this message]
2006-10-26 19:35 ` Odp: " Mateusz Mielnicki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4541054e17553@wp.pl \
    --to=matim@wp.pl \
    --cc=cpufreq@lists.linux.org.uk \
    --cc=linux@dominikbrodowski.net \
    --cc=venkatesh.pallipadi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.