From: "Mateusz Mielnicki" <matim@wp.pl>
To: Pallipadi Venkatesh <venkatesh.pallipadi@intel.com>
Cc: cpufreq <cpufreq@lists.linux.org.uk>,
Dominik Brodowski <linux@dominikbrodowski.net>
Subject: Odp: RE: Intel T2250
Date: Thu, 26 Oct 2006 21:35:39 +0200 [thread overview]
Message-ID: <45410e0b7931b@wp.pl> (raw)
In-Reply-To: <EB12A50964762B4D8111D55B764A8454C966B1@scsmsx413.amr.corp.intel.com>
And also info from /var/log/messages
Oct 26 20:45:40 MatiM acpi-cpufreq: acpi_cpufreq_init
Oct 26 20:45:40 MatiM acpi-cpufreq: acpi_cpufreq_early_init
Oct 26 20:45:40 MatiM cpufreq-core: trying to register driver acpi-cpufreq
Oct 26 20:45:40 MatiM cpufreq-core: adding CPU 0
Oct 26 20:45:40 MatiM acpi-cpufreq: acpi_cpufreq_cpu_init
Oct 26 20:45:40 MatiM cpufreq-core: initialization failed
Oct 26 20:45:40 MatiM cpufreq-core: adding CPU 1
Oct 26 20:45:40 MatiM acpi-cpufreq: acpi_cpufreq_cpu_init
Oct 26 20:45:40 MatiM cpufreq-core: initialization failed
Oct 26 20:45:40 MatiM cpufreq-core: driver acpi-cpufreq up and running
Oct 26 20:46:03 MatiM cpufreq-core: trying to register driver centrino
Oct 26 20:51:31 MatiM acpi-cpufreq: acpi_cpufreq_exit
Oct 26 20:51:31 MatiM cpufreq-core: unregistering driver acpi-cpufreq
Oct 26 20:51:31 MatiM cpufreq-core: unregistering CPU 0
Oct 26 20:51:31 MatiM cpufreq-core: unregistering CPU 1
Oct 26 20:51:50 MatiM acpi-cpufreq: acpi_cpufreq_init
Oct 26 20:51:50 MatiM acpi-cpufreq: acpi_cpufreq_early_init
Oct 26 20:51:50 MatiM cpufreq-core: trying to register driver acpi-cpufreq
Oct 26 20:51:50 MatiM cpufreq-core: adding CPU 0
Oct 26 20:51:50 MatiM acpi-cpufreq: acpi_cpufreq_cpu_init
Oct 26 20:51:50 MatiM cpufreq-core: initialization failed
Oct 26 20:51:50 MatiM cpufreq-core: adding CPU 1
Oct 26 20:51:50 MatiM acpi-cpufreq: acpi_cpufreq_cpu_init
Oct 26 20:51:50 MatiM cpufreq-core: initialization failed
Oct 26 20:51:50 MatiM cpufreq-core: driver acpi-cpufreq up and running
What does this mean ?????
Dnia 26-10-2006 o godz. 19:48 Pallipadi Venkatesh napisa³(a):
>
> Can you try the same thing with 'modprobe acpi-cpufreq' instead of
> 'modprobe speedstep-centrino' in first line below.
>
> Thanks,
> Venki
>
> >-----Original Message-----
> >From: cpufreq-bounces@lists.linux.org.uk
> >[mailto:cpufreq-bounces@lists.linux.org.uk] On Behalf Of
> >Mateusz Mielnicki
> >Sent: Thursday, October 26, 2006 10:38 AM
> >To: Dominik Brodowski
> >Cc: cpufreq
> >Subject: Re: Intel T2250
> >
> >Well, I don't think so... sadly.
> >
> >This is what I get in console:
> >
> >MatiM matim # modprobe speedstep-centrino
> >FATAL: Error inserting speedstep_centrino
> >(/lib/modules/2.6.17-gentoo-r8-w/kernel/arch/i386/kernel/cpu/cp
> >ufreq/speedstep-centrino.ko): No such device
> >MatiM matim # modprobe cpufreq_userspace
> >MatiM matim # modprobe cpufreq_powersave
> >MatiM matim # modprobe cpufreq_ondemand
> >MatiM matim # modprobe cpufreq_conservative
> >MatiM matim # cpufreq-info
> >cpufrequtils 001: cpufreq-info (C) Dominik Brodowski 2004-2006
> >Report errors and bugs to linux@brodo.de, please.
> >analyzing CPU 0:
> > no or unknown cpufreq driver is active on this CPU
> >analyzing CPU 1:
> > no or unknown cpufreq driver is active on this CPU
> >MatiM matim #
> >MatiM matim # ls /sys/devices/system/cpu/cpu*
> >/sys/devices/system/cpu/cpu0:
> >cache topology
> >
> >/sys/devices/system/cpu/cpu1:
> >cache topology
> >MatiM matim #
> >MatiM matim # /etc/init.d/cpufrequtils start
> > * Enabling ondemand cpufreq governor ... [ !! ]unknown or
> >unhandled CPU?
> >MatiM matim #
> >
> >
> >As you can see there is nothing that would say it is working...
> >Is my processor T2250 really supported? I saw that
> >speedstep-centrino contains clock and voltage information of
> >certain processor's, and this one is not even mentioned on
> >intel's page. What can I do with it ?
> >Mateusz
> >
> >
> >Dnia 26-10-2006 o godz. 4:34 Dominik Brodowski napisa³(a):
> >> On Thu, Oct 19, 2006 at 09:54:42AM +0200, Mateusz Mielnicki wrote:
> >> > Yes, every module of cpufreq loads, acpi-cpufreq,
> >cpufreq_powersave,
> >> > cpufreq_conservative, freq_table and so on, excepting
> >speedstep-centrino
> >> > which gives "No such device".
> >>
> >> Well, this means that speedstep is working just fine; it uses the
> >> (preferred) acpi-cpufreq module.
> >>
> >> Dominik
> >>
> >
> >
> >----------------------------------------------------
> >Nowa Gra Zakrêcone Dynie - sprwd¼ i kliknij:
> >http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd2
> >4.html&sid=911
> >Czy zakrêcisz nimi jeszcze bardziej i zbijesz wszystkie z planszy?
> >
> >
> >
> >_______________________________________________
> >Cpufreq mailing list
> >Cpufreq@lists.linux.org.uk
> >http://lists.linux.org.uk/mailman/listinfo/cpufreq
> >
>
----------------------------------------------------
Trzy wesela... i niez³y cyrk: brytyjska komedia "Confetti"
- przebój Warszawskiego Festiwalu Filmowego: w kinach!
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fconfetti.html&sid=912
prev parent reply other threads:[~2006-10-26 19:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-26 17:48 Intel T2250 Pallipadi, Venkatesh
2006-10-26 18:58 ` Odp: " Mateusz Mielnicki
2006-10-26 19:35 ` Mateusz Mielnicki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45410e0b7931b@wp.pl \
--to=matim@wp.pl \
--cc=cpufreq@lists.linux.org.uk \
--cc=linux@dominikbrodowski.net \
--cc=venkatesh.pallipadi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.