[lm-sensors] Sorry, no sensors were detected

[lm-sensors] Sorry, no sensors were detected

[BENAMAR Khalid]

hello

sorry i use this mailing list for asking about lm-sensors

i have installed lm_sensors-2.10.1 (make user and make user_install)

my kernel 2.6.5

when i launche sensors-detect it don't found any sensors

# sensors-detect revision 4171 (2006-09-24 03:37:01 -0700)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): yes
Probing for PCI bus adapters...
Sorry, no known PCI bus adapters found.
!!!!!!!!!!!!!!!!!!!!!!!!!!

We will now try to load each adapter module in turn.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): yes
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM78-J' at 0x290...     No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Probing for `Winbond W83627HF' at 0x290...                  No
Probing for `Silicon Integrated Systems SIS5595'...         No
Probing for `VIA VT82C686 Integrated Sensors'...            No
Probing for `VIA VT8231 Integrated Sensors'...              No
Probing for `AMD K8 thermal sensors'...                     No
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0xee15
Trying family `National Semiconductor'...                   Yes
Found `Nat. Semi. PC8741x Super IO'
    (no hardware monitoring capabilities)
Trying family `SMSC'...                                     Yes
Found unknown chip with ID 0xee15
Trying family `VIA/Winbond/Fintek'...                       Yes
Found unknown chip with ID 0xee15
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'...                                      No
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No

Sorry, no sensors were detected.
!!!!!!!!!!!!!!!!!!!!!!!!!
Either your sensors are not supported, or they are connected to an
I2C or SMBus adapter that is not supported. See doc/FAQ,
doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.

i have read FAQ but i can't resolve problems

thanks for your help
sorry

_________________________________________________________________
MSN Hotmail : cr?ez votre adresse e-mail gratuite & ? vie ! 
http://www.msn.fr/newhotmail/Default.asp?Ath=f

[lm-sensors] Sorry, no sensors were detected

[Rudolf Marek]

Hello

We received your message and we reply when someone will have time for that. In 
the meanwhile please provide output of lspci and also tell us the 
model/manufacturer of your board. Then wait, we are very busy and in my case 
unfortunately also ill...

Rudolf

[lm-sensors] Sorry, no sensors were detected

[BENAMAR Khalid]

when i launch lspci

00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 0c)
00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 
(rev 0c)
00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port C0 
(rev 0c)
00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 
02)
00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 
02)
00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 
02)
00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 
02)
00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI 
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI 
Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 
Storage Controller (rev 02)
01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
01:04.0 System peripheral: Compaq Computer Corporation: Unknown device b203 
(rev 01)
01:04.2 System peripheral: Compaq Computer Corporation: Unknown device b204 
(rev 01)
02:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
02:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
03:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit 
Ethernet (rev 10)
03:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit 
Ethernet (rev 10)
04:03.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx 
(rev 01)
05:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
05:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)


Sp?cifications HP Proliant DL380 intel inside Xeon

Processeur, syst?me d'exploitation et m?moire

Type de processeur
Processeur Intel? Xeon? 3,40 GHz
? 3,40 GHz, 2 Mo de m?moire cache de niveau 2, Bus frontal ? 800 MHz

Nombre de processeurs
1 processeur

Mise ? niveau du processeur
Evolutif vers une configuration biprocesseur

Bus syst?me
Bus frontal ? 800 MHz

M?moire cache interne
2 Mo de m?moire cache de niveau 2

M?moire en standard
1 Go de m?moire en standard

Logements pour la m?moire
6 emplacements

M?moire maximale
12 Go

Type de m?moire
M?moire DDR2 400 MHz PC2-3200R ? entrelacement 2 voies, avec fonctions ECC 
avanc?es et m?moire relais

Lecteurs internes

Disque dur interne
Pas de disque dur en configuration standard

Vitesse du disque dur
Pas de minimum

Contr?leur du disque dur
Contr?leur Ultra320 Smart Array 6i (int?gr? sur la carte syst?me)

Lecteur de disquette
Aucun

Baies pour lecteurs internes
Prise en charge maximale de huit (8) baies de disque enfichables ? chaud 
petit format (mod?les SAS uniquement) ou six (6) baies de disque SCSI U320 
enfichables ? chaud ; Les mod?les SCSI sont dot?s d'une (1) baie 1,6" qui 
prend en charge une unit? de sauvegarde sur bande DAT enfichable ? chaud 
(mod?les U320 SCSI uniquement)

Disques optiques
CD-ROM IDE 24x (baie de support universelle)
Type du lecteur optique
CD-ROM

Caract?ristiques syst?me

Type de ch?ssis
Rack 2U

Chipset
Jeu de composants Intel? E7520
Montage en rack
Le syst?me de rails de d?ploiement rapide du DL380 assure une prise en 
charge sans outil des armoires ? trous de montage carr?s (armoires Compaq/HP 
de s?ries 7000, 9000, 10000 et HP) et permet un ajustement entre 24" et 36". 
Le bras ambidextre de gestion des c?bles peut ?tre mont? ? gauche comme ? 
droite pour optimiser la gestion des c?bles.

Interface r?seau
Adaptateur r?seau Gigabit NC7782 10/100/1000T int?gr?, double port PCI-X
Ports d'E-S externes

S?rie : 1 ; P?riph?rique de pointage (souris) : 1 ; Graphique : 1 ; Clavier 
: 1 ; SCSI externe (VHDCI) : 1 ; RJ-45 r?seau : 3 (1 pour iLO) ; USB : 3 (1 
? l'avant, 2 ? l'arri?re)

Logements d'extension

1 PCI-X 64 bits/133 MHz, 3,3 V ; 2 PCI-X 64 bits/100 MHz, 3,3 V
Type d'alimentation ?lectrique
575 watts, marquage CE ; Alimentation CA redondante enfichable ? chaud en 
option
Alimentation ?lectrique n?cessaire
100 ? 132 V CA, 200 ? 240 V CA ; 50 ? 60 Hz

Conforme ACPI 2.0 ; Conforme PCI 2.2 ; Prise en charge de la fonction WOL ; 
Certifications Microsoft? Logo ; Prise en charge USB 2.0








Celeron, Celeron Inside, Centrino, Centrino logo, Core Inside, Intel, Intel 
logo, Intel Core, Intel Inside, Intel Inside logo, Intel SpeedStep, Intel 
Viiv, Intel vPro, Intel Xeon, Itanium, Itanium Inside, Pentium et Pentium 
Inside sont des marques d?pos?es ou enregistr?es d'Intel Corporation ou de 
ses filiales, aux Etats-Unis et dans d'autres pays.

_________________________________________________________________
MSN Hotmail : cr?ez votre adresse e-mail gratuite & ? vie ! 
http://www.msn.fr/newhotmail/Default.asp?Ath=f