* [PATCH] genhomedircon
@ 2006-11-16 17:24 Michael C Thompson
2006-11-21 21:54 ` Karl MacMillan
0 siblings, 1 reply; 4+ messages in thread
From: Michael C Thompson @ 2006-11-16 17:24 UTC (permalink / raw)
To: SE Linux
[-- Attachment #1: Type: text/plain, Size: 857 bytes --]
I've noticed that genhomedircon does not have the proper return codes on
some error and success paths. This patch addresses these return codes as
follow:
* usage function by default returns 0, and the desired return code can
be specified via a parameter. This facilitates the fix to the current
behaviour that 1 is returned on 'genhomedircon -h'.
* I have noticed that as secadm (this is a bug? will start a separate
thread) fails to successfully call semanage_connect(). The result of
this operation is now checked, and the script will exit on error.
* If the attempt to write the homedir contexts out fails, a proper error
code will be returned (previously, 1 would be returned).
This also moves the parsing of /etc/shells to after the uid check for a
minimal time savings.
Thanks,
Mike
Signed-of-by: Michael Thompson <mcthomps@us.ibm.com>
[-- Attachment #2: genhomedircon-exit_status.patch --]
[-- Type: text/x-diff, Size: 3255 bytes --]
diff -Naur policycoreutils-1.33.1/scripts/genhomedircon policycoreutils-1.33.1.dev/scripts/genhomedircon
--- policycoreutils-1.33.1/scripts/genhomedircon 2006-11-14 08:46:14.000000000 -0600
+++ policycoreutils-1.33.1.dev/scripts/genhomedircon 2006-11-16 06:03:50.000000000 -0600
@@ -29,17 +29,6 @@
import gettext
gettext.install('policycoreutils')
-try:
- fd = open("/etc/shells", 'r')
- VALID_SHELLS = fd.read().split("\n")
- fd.close()
- if "/sbin/nologin" in VALID_SHELLS:
- VALID_SHELLS.remove("/sbin/nologin")
- if "" in VALID_SHELLS:
- VALID_SHELLS.remove("")
-except:
- VALID_SHELLS = ['/bin/sh', '/bin/bash', '/bin/ash', '/bin/bsh', '/bin/ksh', '/usr/bin/ksh', '/usr/bin/pdksh', '/bin/tcsh', '/bin/csh', '/bin/zsh']
-
def grep(file, var):
ret = ""
fd = open(file, 'r')
@@ -114,12 +103,13 @@
return val
return "targeted"
-def usage(error = ""):
+def usage(rc=0, error = ""):
if error != "":
sys.stderr.write("%s\n" % error)
+ rc = 1
sys.stderr.write("Usage: %s [ -d selinuxdir ] [-n | --nopasswd] [-t selinuxtype ]\n" % sys.argv[0])
sys.stderr.flush()
- sys.exit(1)
+ sys.exit(rc)
def warning(warning = ""):
sys.stderr.write("%s\n" % warning)
@@ -136,7 +126,9 @@
self.semanageHandle = semanage_handle_create()
self.semanaged = semanage_is_managed(self.semanageHandle)
if self.semanaged:
- semanage_connect(self.semanageHandle)
+ rc = semanage_connect(self.semanageHandle)
+ if rc:
+ errorExit("Unable to connect to semanage")
(status, self.ulist) = semanage_user_list(self.semanageHandle)
self.type = type
self.selinuxdir = selinuxdir +"/"
@@ -336,18 +328,25 @@
print self.genoutput()
def write(self):
- try:
- fd = open(self.getFileContextDir()+"/file_contexts.homedirs", "w")
- fd.write(self.genoutput())
- fd.close()
- except IOError, error:
- sys.stderr.write("%s: %s\n" % ( sys.argv[0], error ))
-
+ fd = open(self.getFileContextDir()+"/file_contexts.homedirs", "w")
+ fd.write(self.genoutput())
+ fd.close()
if os.getuid() > 0 or os.geteuid() > 0:
print _("You must be root to run %s.") % sys.argv[0]
sys.exit(1)
+try:
+ fd = open("/etc/shells", 'r')
+ VALID_SHELLS = fd.read().split("\n")
+ fd.close()
+ if "/sbin/nologin" in VALID_SHELLS:
+ VALID_SHELLS.remove("/sbin/nologin")
+ if "" in VALID_SHELLS:
+ VALID_SHELLS.remove("")
+except:
+ VALID_SHELLS = ['/bin/sh', '/bin/bash', '/bin/ash', '/bin/bsh', '/bin/ksh', '/usr/bin/ksh', '/usr/bin/pdksh', '/bin/tcsh', '/bin/csh', '/bin/zsh']
+
#
# This script will generate home dir file context
# based off the homedir_template file, entries in the password file, and
@@ -369,15 +368,19 @@
directory = a
if o == '--help' or o == "-h":
usage()
+except getopt.error, error:
+ errorExit(_("Options Error %s ") % error)
+if type == None:
+ type = getSELinuxType(directory)
- if type == None:
- type = getSELinuxType(directory)
+if len(cmds) != 0:
+ usage(1)
- if len(cmds) != 0:
- usage()
- selconf = selinuxConfig(directory, type, usepwd)
+selconf = selinuxConfig(directory, type, usepwd)
+try:
selconf.write()
+except IOError, error:
+ sys.stderr.write("%s: %s\n" % ( sys.argv[0], error ))
+ sys.exit(1)
-except getopt.error, error:
- errorExit(_("Options Error %s ") % error)
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] genhomedircon
2006-11-16 17:24 [PATCH] genhomedircon Michael C Thompson
@ 2006-11-21 21:54 ` Karl MacMillan
2006-11-22 15:00 ` Stephen Smalley
0 siblings, 1 reply; 4+ messages in thread
From: Karl MacMillan @ 2006-11-21 21:54 UTC (permalink / raw)
To: Michael C Thompson; +Cc: SE Linux
Michael C Thompson wrote:
> I've noticed that genhomedircon does not have the proper return codes on
> some error and success paths. This patch addresses these return codes as
> follow:
>
> * usage function by default returns 0, and the desired return code can
> be specified via a parameter. This facilitates the fix to the current
> behaviour that 1 is returned on 'genhomedircon -h'.
>
> * I have noticed that as secadm (this is a bug? will start a separate
> thread) fails to successfully call semanage_connect(). The result of
> this operation is now checked, and the script will exit on error.
>
> * If the attempt to write the homedir contexts out fails, a proper error
> code will be returned (previously, 1 would be returned).
>
> This also moves the parsing of /etc/shells to after the uid check for a
> minimal time savings.
>
> Thanks,
> Mike
>
> Signed-of-by: Michael Thompson <mcthomps@us.ibm.com>
>
>
> ------------------------------------------------------------------------
>
> diff -Naur policycoreutils-1.33.1/scripts/genhomedircon policycoreutils-1.33.1.dev/scripts/genhomedircon
> --- policycoreutils-1.33.1/scripts/genhomedircon 2006-11-14 08:46:14.000000000 -0600
> +++ policycoreutils-1.33.1.dev/scripts/genhomedircon 2006-11-16 06:03:50.000000000 -0600
> @@ -29,17 +29,6 @@
> import gettext
> gettext.install('policycoreutils')
>
> -try:
> - fd = open("/etc/shells", 'r')
> - VALID_SHELLS = fd.read().split("\n")
> - fd.close()
> - if "/sbin/nologin" in VALID_SHELLS:
> - VALID_SHELLS.remove("/sbin/nologin")
> - if "" in VALID_SHELLS:
> - VALID_SHELLS.remove("")
> -except:
> - VALID_SHELLS = ['/bin/sh', '/bin/bash', '/bin/ash', '/bin/bsh', '/bin/ksh', '/usr/bin/ksh', '/usr/bin/pdksh', '/bin/tcsh', '/bin/csh', '/bin/zsh']
> -
> def grep(file, var):
> ret = ""
> fd = open(file, 'r')
> @@ -114,12 +103,13 @@
> return val
> return "targeted"
>
> -def usage(error = ""):
> +def usage(rc=0, error = ""):
> if error != "":
> sys.stderr.write("%s\n" % error)
> + rc = 1
> sys.stderr.write("Usage: %s [ -d selinuxdir ] [-n | --nopasswd] [-t selinuxtype ]\n" % sys.argv[0])
> sys.stderr.flush()
> - sys.exit(1)
> + sys.exit(rc)
>
> def warning(warning = ""):
> sys.stderr.write("%s\n" % warning)
> @@ -136,7 +126,9 @@
> self.semanageHandle = semanage_handle_create()
> self.semanaged = semanage_is_managed(self.semanageHandle)
> if self.semanaged:
> - semanage_connect(self.semanageHandle)
> + rc = semanage_connect(self.semanageHandle)
> + if rc:
> + errorExit("Unable to connect to semanage")
> (status, self.ulist) = semanage_user_list(self.semanageHandle)
> self.type = type
> self.selinuxdir = selinuxdir +"/"
> @@ -336,18 +328,25 @@
> print self.genoutput()
>
> def write(self):
> - try:
> - fd = open(self.getFileContextDir()+"/file_contexts.homedirs", "w")
> - fd.write(self.genoutput())
> - fd.close()
> - except IOError, error:
> - sys.stderr.write("%s: %s\n" % ( sys.argv[0], error ))
> -
> + fd = open(self.getFileContextDir()+"/file_contexts.homedirs", "w")
> + fd.write(self.genoutput())
> + fd.close()
>
> if os.getuid() > 0 or os.geteuid() > 0:
> print _("You must be root to run %s.") % sys.argv[0]
> sys.exit(1)
>
> +try:
> + fd = open("/etc/shells", 'r')
> + VALID_SHELLS = fd.read().split("\n")
> + fd.close()
> + if "/sbin/nologin" in VALID_SHELLS:
> + VALID_SHELLS.remove("/sbin/nologin")
> + if "" in VALID_SHELLS:
> + VALID_SHELLS.remove("")
> +except:
> + VALID_SHELLS = ['/bin/sh', '/bin/bash', '/bin/ash', '/bin/bsh', '/bin/ksh', '/usr/bin/ksh', '/usr/bin/pdksh', '/bin/tcsh', '/bin/csh', '/bin/zsh']
> +
> #
> # This script will generate home dir file context
> # based off the homedir_template file, entries in the password file, and
> @@ -369,15 +368,19 @@
> directory = a
> if o == '--help' or o == "-h":
> usage()
> +except getopt.error, error:
> + errorExit(_("Options Error %s ") % error)
>
> +if type == None:
> + type = getSELinuxType(directory)
>
> - if type == None:
> - type = getSELinuxType(directory)
> +if len(cmds) != 0:
> + usage(1)
>
> - if len(cmds) != 0:
> - usage()
> - selconf = selinuxConfig(directory, type, usepwd)
> +selconf = selinuxConfig(directory, type, usepwd)
> +try:
> selconf.write()
> +except IOError, error:
> + sys.stderr.write("%s: %s\n" % ( sys.argv[0], error ))
> + sys.exit(1)
>
> -except getopt.error, error:
> - errorExit(_("Options Error %s ") % error)
Acked-by: Karl MacMillan <kmacmillan@mentalrootkit.com>
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] genhomedircon
2006-11-21 21:54 ` Karl MacMillan
@ 2006-11-22 15:00 ` Stephen Smalley
2006-11-27 19:19 ` Karl MacMillan
0 siblings, 1 reply; 4+ messages in thread
From: Stephen Smalley @ 2006-11-22 15:00 UTC (permalink / raw)
To: Karl MacMillan; +Cc: Michael C Thompson, SE Linux
On Tue, 2006-11-21 at 16:54 -0500, Karl MacMillan wrote:
> Michael C Thompson wrote:
> > I've noticed that genhomedircon does not have the proper return codes on
> > some error and success paths. This patch addresses these return codes as
> > follow:
> >
> > * usage function by default returns 0, and the desired return code can
> > be specified via a parameter. This facilitates the fix to the current
> > behaviour that 1 is returned on 'genhomedircon -h'.
> >
> > * I have noticed that as secadm (this is a bug? will start a separate
> > thread) fails to successfully call semanage_connect(). The result of
> > this operation is now checked, and the script will exit on error.
> >
> > * If the attempt to write the homedir contexts out fails, a proper error
> > code will be returned (previously, 1 would be returned).
> >
> > This also moves the parsing of /etc/shells to after the uid check for a
> > minimal time savings.
> >
> > Thanks,
> > Mike
> >
> > Signed-of-by: Michael Thompson <mcthomps@us.ibm.com>
> >
> >
> > ------------------------------------------------------------------------
> >
> > diff -Naur policycoreutils-1.33.1/scripts/genhomedircon policycoreutils-1.33.1.dev/scripts/genhomedircon
> > --- policycoreutils-1.33.1/scripts/genhomedircon 2006-11-14 08:46:14.000000000 -0600
> > +++ policycoreutils-1.33.1.dev/scripts/genhomedircon 2006-11-16 06:03:50.000000000 -0600
> > @@ -29,17 +29,6 @@
> > import gettext
> > gettext.install('policycoreutils')
> >
> > -try:
> > - fd = open("/etc/shells", 'r')
> > - VALID_SHELLS = fd.read().split("\n")
> > - fd.close()
> > - if "/sbin/nologin" in VALID_SHELLS:
> > - VALID_SHELLS.remove("/sbin/nologin")
> > - if "" in VALID_SHELLS:
> > - VALID_SHELLS.remove("")
> > -except:
> > - VALID_SHELLS = ['/bin/sh', '/bin/bash', '/bin/ash', '/bin/bsh', '/bin/ksh', '/usr/bin/ksh', '/usr/bin/pdksh', '/bin/tcsh', '/bin/csh', '/bin/zsh']
> > -
> > def grep(file, var):
> > ret = ""
> > fd = open(file, 'r')
> > @@ -114,12 +103,13 @@
> > return val
> > return "targeted"
> >
> > -def usage(error = ""):
> > +def usage(rc=0, error = ""):
> > if error != "":
> > sys.stderr.write("%s\n" % error)
> > + rc = 1
> > sys.stderr.write("Usage: %s [ -d selinuxdir ] [-n | --nopasswd] [-t selinuxtype ]\n" % sys.argv[0])
> > sys.stderr.flush()
> > - sys.exit(1)
> > + sys.exit(rc)
> >
> > def warning(warning = ""):
> > sys.stderr.write("%s\n" % warning)
> > @@ -136,7 +126,9 @@
> > self.semanageHandle = semanage_handle_create()
> > self.semanaged = semanage_is_managed(self.semanageHandle)
> > if self.semanaged:
> > - semanage_connect(self.semanageHandle)
> > + rc = semanage_connect(self.semanageHandle)
> > + if rc:
> > + errorExit("Unable to connect to semanage")
> > (status, self.ulist) = semanage_user_list(self.semanageHandle)
> > self.type = type
> > self.selinuxdir = selinuxdir +"/"
> > @@ -336,18 +328,25 @@
> > print self.genoutput()
> >
> > def write(self):
> > - try:
> > - fd = open(self.getFileContextDir()+"/file_contexts.homedirs", "w")
> > - fd.write(self.genoutput())
> > - fd.close()
> > - except IOError, error:
> > - sys.stderr.write("%s: %s\n" % ( sys.argv[0], error ))
> > -
> > + fd = open(self.getFileContextDir()+"/file_contexts.homedirs", "w")
> > + fd.write(self.genoutput())
> > + fd.close()
> >
> > if os.getuid() > 0 or os.geteuid() > 0:
> > print _("You must be root to run %s.") % sys.argv[0]
> > sys.exit(1)
> >
> > +try:
> > + fd = open("/etc/shells", 'r')
> > + VALID_SHELLS = fd.read().split("\n")
> > + fd.close()
> > + if "/sbin/nologin" in VALID_SHELLS:
> > + VALID_SHELLS.remove("/sbin/nologin")
> > + if "" in VALID_SHELLS:
> > + VALID_SHELLS.remove("")
> > +except:
> > + VALID_SHELLS = ['/bin/sh', '/bin/bash', '/bin/ash', '/bin/bsh', '/bin/ksh', '/usr/bin/ksh', '/usr/bin/pdksh', '/bin/tcsh', '/bin/csh', '/bin/zsh']
> > +
> > #
> > # This script will generate home dir file context
> > # based off the homedir_template file, entries in the password file, and
> > @@ -369,15 +368,19 @@
> > directory = a
> > if o == '--help' or o == "-h":
> > usage()
> > +except getopt.error, error:
> > + errorExit(_("Options Error %s ") % error)
> >
> > +if type == None:
> > + type = getSELinuxType(directory)
> >
> > - if type == None:
> > - type = getSELinuxType(directory)
> > +if len(cmds) != 0:
> > + usage(1)
> >
> > - if len(cmds) != 0:
> > - usage()
> > - selconf = selinuxConfig(directory, type, usepwd)
> > +selconf = selinuxConfig(directory, type, usepwd)
> > +try:
> > selconf.write()
> > +except IOError, error:
> > + sys.stderr.write("%s: %s\n" % ( sys.argv[0], error ))
> > + sys.exit(1)
> >
> > -except getopt.error, error:
> > - errorExit(_("Options Error %s ") % error)
>
> Acked-by: Karl MacMillan <kmacmillan@mentalrootkit.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
--
Stephen Smalley
National Security Agency
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] genhomedircon
2006-11-22 15:00 ` Stephen Smalley
@ 2006-11-27 19:19 ` Karl MacMillan
0 siblings, 0 replies; 4+ messages in thread
From: Karl MacMillan @ 2006-11-27 19:19 UTC (permalink / raw)
To: Stephen Smalley; +Cc: Michael C Thompson, SE Linux
Merged as part of policycoreutils 1.33.5
Stephen Smalley wrote:
> On Tue, 2006-11-21 at 16:54 -0500, Karl MacMillan wrote:
>> Michael C Thompson wrote:
>>> I've noticed that genhomedircon does not have the proper return codes on
>>> some error and success paths. This patch addresses these return codes as
>>> follow:
>>>
>>> * usage function by default returns 0, and the desired return code can
>>> be specified via a parameter. This facilitates the fix to the current
>>> behaviour that 1 is returned on 'genhomedircon -h'.
>>>
>>> * I have noticed that as secadm (this is a bug? will start a separate
>>> thread) fails to successfully call semanage_connect(). The result of
>>> this operation is now checked, and the script will exit on error.
>>>
>>> * If the attempt to write the homedir contexts out fails, a proper error
>>> code will be returned (previously, 1 would be returned).
>>>
>>> This also moves the parsing of /etc/shells to after the uid check for a
>>> minimal time savings.
>>>
>>> Thanks,
>>> Mike
>>>
>>> Signed-of-by: Michael Thompson <mcthomps@us.ibm.com>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> diff -Naur policycoreutils-1.33.1/scripts/genhomedircon policycoreutils-1.33.1.dev/scripts/genhomedircon
>>> --- policycoreutils-1.33.1/scripts/genhomedircon 2006-11-14 08:46:14.000000000 -0600
>>> +++ policycoreutils-1.33.1.dev/scripts/genhomedircon 2006-11-16 06:03:50.000000000 -0600
>>> @@ -29,17 +29,6 @@
>>> import gettext
>>> gettext.install('policycoreutils')
>>>
>>> -try:
>>> - fd = open("/etc/shells", 'r')
>>> - VALID_SHELLS = fd.read().split("\n")
>>> - fd.close()
>>> - if "/sbin/nologin" in VALID_SHELLS:
>>> - VALID_SHELLS.remove("/sbin/nologin")
>>> - if "" in VALID_SHELLS:
>>> - VALID_SHELLS.remove("")
>>> -except:
>>> - VALID_SHELLS = ['/bin/sh', '/bin/bash', '/bin/ash', '/bin/bsh', '/bin/ksh', '/usr/bin/ksh', '/usr/bin/pdksh', '/bin/tcsh', '/bin/csh', '/bin/zsh']
>>> -
>>> def grep(file, var):
>>> ret = ""
>>> fd = open(file, 'r')
>>> @@ -114,12 +103,13 @@
>>> return val
>>> return "targeted"
>>>
>>> -def usage(error = ""):
>>> +def usage(rc=0, error = ""):
>>> if error != "":
>>> sys.stderr.write("%s\n" % error)
>>> + rc = 1
>>> sys.stderr.write("Usage: %s [ -d selinuxdir ] [-n | --nopasswd] [-t selinuxtype ]\n" % sys.argv[0])
>>> sys.stderr.flush()
>>> - sys.exit(1)
>>> + sys.exit(rc)
>>>
>>> def warning(warning = ""):
>>> sys.stderr.write("%s\n" % warning)
>>> @@ -136,7 +126,9 @@
>>> self.semanageHandle = semanage_handle_create()
>>> self.semanaged = semanage_is_managed(self.semanageHandle)
>>> if self.semanaged:
>>> - semanage_connect(self.semanageHandle)
>>> + rc = semanage_connect(self.semanageHandle)
>>> + if rc:
>>> + errorExit("Unable to connect to semanage")
>>> (status, self.ulist) = semanage_user_list(self.semanageHandle)
>>> self.type = type
>>> self.selinuxdir = selinuxdir +"/"
>>> @@ -336,18 +328,25 @@
>>> print self.genoutput()
>>>
>>> def write(self):
>>> - try:
>>> - fd = open(self.getFileContextDir()+"/file_contexts.homedirs", "w")
>>> - fd.write(self.genoutput())
>>> - fd.close()
>>> - except IOError, error:
>>> - sys.stderr.write("%s: %s\n" % ( sys.argv[0], error ))
>>> -
>>> + fd = open(self.getFileContextDir()+"/file_contexts.homedirs", "w")
>>> + fd.write(self.genoutput())
>>> + fd.close()
>>>
>>> if os.getuid() > 0 or os.geteuid() > 0:
>>> print _("You must be root to run %s.") % sys.argv[0]
>>> sys.exit(1)
>>>
>>> +try:
>>> + fd = open("/etc/shells", 'r')
>>> + VALID_SHELLS = fd.read().split("\n")
>>> + fd.close()
>>> + if "/sbin/nologin" in VALID_SHELLS:
>>> + VALID_SHELLS.remove("/sbin/nologin")
>>> + if "" in VALID_SHELLS:
>>> + VALID_SHELLS.remove("")
>>> +except:
>>> + VALID_SHELLS = ['/bin/sh', '/bin/bash', '/bin/ash', '/bin/bsh', '/bin/ksh', '/usr/bin/ksh', '/usr/bin/pdksh', '/bin/tcsh', '/bin/csh', '/bin/zsh']
>>> +
>>> #
>>> # This script will generate home dir file context
>>> # based off the homedir_template file, entries in the password file, and
>>> @@ -369,15 +368,19 @@
>>> directory = a
>>> if o == '--help' or o == "-h":
>>> usage()
>>> +except getopt.error, error:
>>> + errorExit(_("Options Error %s ") % error)
>>>
>>> +if type == None:
>>> + type = getSELinuxType(directory)
>>>
>>> - if type == None:
>>> - type = getSELinuxType(directory)
>>> +if len(cmds) != 0:
>>> + usage(1)
>>>
>>> - if len(cmds) != 0:
>>> - usage()
>>> - selconf = selinuxConfig(directory, type, usepwd)
>>> +selconf = selinuxConfig(directory, type, usepwd)
>>> +try:
>>> selconf.write()
>>> +except IOError, error:
>>> + sys.stderr.write("%s: %s\n" % ( sys.argv[0], error ))
>>> + sys.exit(1)
>>>
>>> -except getopt.error, error:
>>> - errorExit(_("Options Error %s ") % error)
>> Acked-by: Karl MacMillan <kmacmillan@mentalrootkit.com>
>
> Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
>
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-11-27 19:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-16 17:24 [PATCH] genhomedircon Michael C Thompson
2006-11-21 21:54 ` Karl MacMillan
2006-11-22 15:00 ` Stephen Smalley
2006-11-27 19:19 ` Karl MacMillan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.