* [Bluez-users] Can't init device hci0: Connection timed out (110)
@ 2006-11-22 17:24 Simon Williams
2006-11-23 7:21 ` Andres Vargas - zodman
0 siblings, 1 reply; 3+ messages in thread
From: Simon Williams @ 2006-11-22 17:24 UTC (permalink / raw)
To: BlueZ users
Hello again. I've finally managed to get the device (my 3Com 3CRWB6096
Version 2.0 PCMCIA Card) to show up in hciconfig (I had the wrong firmware).
Dbus is running, all the bluetooth services are running.
But I get the following...
# hciconfig
hci0: Type: PCCARD
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN INIT RUNNING
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:4 acl:0 sco:0 commands:1 errors:0
# hciconfig hci0 up
Can't init device hci0: Connection timed out (110)
# hciconfig
hci0: Type: PCCARD
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:4 acl:0 sco:0 commands:2 errors:0
Is there some way I can manually probe the card for it's address to find
out if it's bluez or the driver?
Shouldn't it have an address even when it's down?
Please, any other suggestions very much appreciated.
Thanks in advance
Simon
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Bluez-users] Can't init device hci0: Connection timed out (110)
2006-11-22 17:24 [Bluez-users] Can't init device hci0: Connection timed out (110) Simon Williams
@ 2006-11-23 7:21 ` Andres Vargas - zodman
2006-11-23 12:56 ` Simon Williams
0 siblings, 1 reply; 3+ messages in thread
From: Andres Vargas - zodman @ 2006-11-23 7:21 UTC (permalink / raw)
To: bluez-users
get more errors
first kill hcid process
run:
$ hcid -n -f /dirof/hcid.conf
and it get more errors
On Wed, 22 Nov 2006 17:24:21 +0000
Simon Williams <systemparadox@googlemail.com> wrote:
> Hello again. I've finally managed to get the device (my 3Com 3CRWB6096
> Version 2.0 PCMCIA Card) to show up in hciconfig (I had the wrong firmware).
>
> Dbus is running, all the bluetooth services are running.
> But I get the following...
>
> # hciconfig
> hci0: Type: PCCARD
> BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
> DOWN INIT RUNNING
> RX bytes:0 acl:0 sco:0 events:0 errors:0
> TX bytes:4 acl:0 sco:0 commands:1 errors:0
>
> # hciconfig hci0 up
> Can't init device hci0: Connection timed out (110)
> # hciconfig
> hci0: Type: PCCARD
> BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
> DOWN
> RX bytes:0 acl:0 sco:0 events:0 errors:0
> TX bytes:4 acl:0 sco:0 commands:2 errors:0
>
> Is there some way I can manually probe the card for it's address to find
> out if it's bluez or the driver?
> Shouldn't it have an address even when it's down?
>
> Please, any other suggestions very much appreciated.
> Thanks in advance
> Simon
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
--
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Bluez-users] Can't init device hci0: Connection timed out (110)
2006-11-23 7:21 ` Andres Vargas - zodman
@ 2006-11-23 12:56 ` Simon Williams
0 siblings, 0 replies; 3+ messages in thread
From: Simon Williams @ 2006-11-23 12:56 UTC (permalink / raw)
To: BlueZ users
Andres Vargas - zodman wrote:
> get more errors
>
> first kill hcid process
>
> run:
>
> $ hcid -n -f /dirof/hcid.conf
>
> and it get more errors
Not really. The error appears to be with the driver, and not hcid. All
that I get from the above is this, which I already had in my syslogs.
hcid[20521]: Bluetooth HCI daemon
hcid[20521]: Register path:/org/bluez fallback:1
hcid[20521]: HCI dev 0 registered
hcid[20521]: Register path:/org/bluez/hci0 fallback:0
hcid[20522]: Can't init device hci0: Connection timed out (110)
> On Wed, 22 Nov 2006 17:24:21 +0000
> Simon Williams <systemparadox@googlemail.com> wrote:
>
>> Hello again. I've finally managed to get the device (my 3Com 3CRWB6096
>> Version 2.0 PCMCIA Card) to show up in hciconfig (I had the wrong firmware).
>>
>> Dbus is running, all the bluetooth services are running.
>> But I get the following...
>>
>> # hciconfig
>> hci0: Type: PCCARD
>> BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
>> DOWN INIT RUNNING
>> RX bytes:0 acl:0 sco:0 events:0 errors:0
>> TX bytes:4 acl:0 sco:0 commands:1 errors:0
>>
>> # hciconfig hci0 up
>> Can't init device hci0: Connection timed out (110)
>> # hciconfig
>> hci0: Type: PCCARD
>> BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
>> DOWN
>> RX bytes:0 acl:0 sco:0 events:0 errors:0
>> TX bytes:4 acl:0 sco:0 commands:2 errors:0
>>
>> Is there some way I can manually probe the card for it's address to find
>> out if it's bluez or the driver?
>> Shouldn't it have an address even when it's down?
>>
>> Please, any other suggestions very much appreciated.
>> Thanks in advance
>> Simon
>>
>> -------------------------------------------------------------------------
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to share your
>> opinions on IT & business topics through brief surveys - and earn cash
>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>> _______________________________________________
>> Bluez-users mailing list
>> Bluez-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-11-23 12:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-22 17:24 [Bluez-users] Can't init device hci0: Connection timed out (110) Simon Williams
2006-11-23 7:21 ` Andres Vargas - zodman
2006-11-23 12:56 ` Simon Williams
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.