* [lm-sensors] Sending config for ABit NF-M2
@ 2006-12-02 14:16 MC Castle
2006-12-03 10:29 ` Jean Delvare
0 siblings, 1 reply; 2+ messages in thread
From: MC Castle @ 2006-12-02 14:16 UTC (permalink / raw)
To: lm-sensors
1)I could not get your Wiki to work, so maybe someone could post this in
event I'm not the only person with a NF-M2.
2) You instructions for installing lm-sensors suggests removing files
from /usr/lib. This breaks KSysGuard.
#======================
# ABIT NF-M2
#
# MC Castle, Castle Engineering Services, LLC
# 02 Dec 2006: Initial conf for ABIT NF-M2
#
#======================
#****************************************
chip "k8temp-*"
# k8temp-i2c--5-c3
# Adapter: PCI adapter
#****************************************
label temp1 "Core 0"
ignore temp2
label temp3 "Core 1"
ignore temp4
#****************************************
chip "w83627ehf-*"
# w83627ehf-isa-0290
# Adapter: ISA adapter
# From ABITEQ: Factor = (R2/(R1+R2))*1000
# Not sure of VAVCC & VSB
#****************************************
label in0 "VCore" #VCORE Index 0x20, Bank 0, Factor = 1000
label in1 "DDR2 V" #VIN0 Index 0x21, Bank 0, Factor = 500
label in2 "VAVCC?" #VAVCC Index 0x22, Bank 0, Factor = ?
ignore in2
label in3 "ATX +3.3V" #V3VCC Index 0x23, Bank 0, Factor = 1000
label in4 "DDR VTT" #VIN1 Index 0x24, Bank 0, Factor =
1000
label in5 "CS Core" #VIN2 Index 0x25, Bank 0, Factor =
1000
label in6 "ATX +12V" #VIN3 Index 0x26, Bank 0, Factor = 131
label in7 "VSB?" #VSB Index 0x50, Bank 5, Factor = ?
ignore in7
label in8 "VBAT" #VBAT Index 0x51, Bank 5, Factor = ?
label in9 "ATX +5V" #VIN4 Index 0x52, Bank 5, Factor = 333
label temp1 "Case Temp" #SYSTIN Index 0x27, Bank 0
label temp2 "CPU Temp" #CPUTIN Index 0x50, Bank 1
label temp3 "PWM Temp" #AUXTIN Index 0x50, Bank 2
label fan1 "SYS Fan" #SYSFANIN Index 0x28, Bank 0
label fan2 "CPU Fan" #CPUFANIN0 Index 0x29, Bank 0
label fan3 "AUX1 Fan" #AUXFANIN0 Index 0x2a, Bank 0
label fan4 "Aux2 Fan" #CPUFANIN1 Index 0x3f, Bank 0
label fan5 "Aux3 Fan" #AUXFANIN1 Index 0x53, Bank 5
#---------------------------------------------------------------------------
# commented out Factor = 1000 (read direct entries)
# compute in0 (1000/1000)*@, @/(1000/1000) # F = 1000
compute in1 (1000/500)*@, @/(1000/500) # F = 500
# compute in2 (1000/x)*@, @/(1000/x) # F = ?
# compute in3 (1000/1000)*@, @/(1000/1000) # F = 1000
# compute in4 (1000/1000)*@, @/(1000/1000) # F = 1000
# compute in5 (1000/1000)*@, @/(1000/1000) # F = 1000
compute in6 (1000/131)*@, @/(1000/131) # F = 131
# compute in7 (1000/x)*@, @/(1000/x) # F = ?
# compute in8 (1000/x)*@, @/(1000/x) # F = ?
compute in9 (1000/333)*@, @/(1000/333) # F = 333
#---------------------------------------------------------------------------
# set limits to 5% for the critical voltages
# set limits to 10% for the non-critical voltages
# set limits to 20% for the battery voltage
set in0_min 1.35*0.95
set in0_max 1.35*1.05
set in1_min 1.8*0.95
set in1_max 1.8*1.05
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 3.3 * 0.95
set in3_max 3.3 * 1.05
set in4_min 0.9 * 0.95
set in4_max 0.9 * 1.05
set in5_min 1.2 * 0.95
set in5_max 1.2 * 1.05
set in6_min 12.0 * 0.95
set in6_max 12.0 * 1.05
set in7_min 3.3 * 0.90
set in7_max 3.3 * 1.10
set in8_min 3.0 * 0.80
set in8_max 3.0 * 1.20
set in9_min 5.0 * 0.95
set in9_max 5.0 * 1.05
set fan1_min 2000
set fan2_min 2000
set temp1_over 50
set temp1_hyst 45
set temp2_over 65
set temp2_hyst 60
set temp3_over 70
set temp3_hyst 65
#---------------------------------------------------------------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ohiomike.vcf
Type: text/x-vcard
Size: 257 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20061202/49f92541/attachment.vcf
^ permalink raw reply [flat|nested] 2+ messages in thread
* [lm-sensors] Sending config for ABit NF-M2
2006-12-02 14:16 [lm-sensors] Sending config for ABit NF-M2 MC Castle
@ 2006-12-03 10:29 ` Jean Delvare
0 siblings, 0 replies; 2+ messages in thread
From: Jean Delvare @ 2006-12-03 10:29 UTC (permalink / raw)
To: lm-sensors
On Sat, 02 Dec 2006 09:16:32 -0500, MC Castle wrote:
> 1)I could not get your Wiki to work, so maybe someone could post this in
> event I'm not the only person with a NF-M2.
> 2) You instructions for installing lm-sensors suggests removing files
> from /usr/lib. This breaks KSysGuard.
Which instructions?
>
> #======================
> # ABIT NF-M2
> #
> # MC Castle, Castle Engineering Services, LLC
> # 02 Dec 2006: Initial conf for ABIT NF-M2
> #
> #======================
>
> #****************************************
> chip "k8temp-*"
> # k8temp-i2c--5-c3
Strange string, "sensors" doesn't actually display this, does it?
> # Adapter: PCI adapter
> #****************************************
>
> label temp1 "Core 0"
> ignore temp2
> label temp3 "Core 1"
> ignore temp4
>
> #****************************************
> chip "w83627ehf-*"
> # w83627ehf-isa-0290
> # Adapter: ISA adapter
>
> # From ABITEQ: Factor = (R2/(R1+R2))*1000
> # Not sure of VAVCC & VSB
> #****************************************
>
> label in0 "VCore" #VCORE Index 0x20, Bank 0, Factor = 1000
> label in1 "DDR2 V" #VIN0 Index 0x21, Bank 0, Factor = 500
> label in2 "VAVCC?" #VAVCC Index 0x22, Bank 0, Factor = ?
> ignore in2
> label in3 "ATX +3.3V" #V3VCC Index 0x23, Bank 0, Factor = 1000
> label in4 "DDR VTT" #VIN1 Index 0x24, Bank 0, Factor =
> 1000
> label in5 "CS Core" #VIN2 Index 0x25, Bank 0, Factor =
> 1000
> label in6 "ATX +12V" #VIN3 Index 0x26, Bank 0, Factor = 131
> label in7 "VSB?" #VSB Index 0x50, Bank 5, Factor = ?
> ignore in7
> label in8 "VBAT" #VBAT Index 0x51, Bank 5, Factor = ?
> label in9 "ATX +5V" #VIN4 Index 0x52, Bank 5, Factor = 333
>
> label temp1 "Case Temp" #SYSTIN Index 0x27, Bank 0
> label temp2 "CPU Temp" #CPUTIN Index 0x50, Bank 1
> label temp3 "PWM Temp" #AUXTIN Index 0x50, Bank 2
>
> label fan1 "SYS Fan" #SYSFANIN Index 0x28, Bank 0
> label fan2 "CPU Fan" #CPUFANIN0 Index 0x29, Bank 0
> label fan3 "AUX1 Fan" #AUXFANIN0 Index 0x2a, Bank 0
> label fan4 "Aux2 Fan" #CPUFANIN1 Index 0x3f, Bank 0
> label fan5 "Aux3 Fan" #AUXFANIN1 Index 0x53, Bank 5
>
> #---------------------------------------------------------------------------
>
> # commented out Factor = 1000 (read direct entries)
>
> # compute in0 (1000/1000)*@, @/(1000/1000) # F = 1000
> compute in1 (1000/500)*@, @/(1000/500) # F = 500
> # compute in2 (1000/x)*@, @/(1000/x) # F = ?
> # compute in3 (1000/1000)*@, @/(1000/1000) # F = 1000
> # compute in4 (1000/1000)*@, @/(1000/1000) # F = 1000
> # compute in5 (1000/1000)*@, @/(1000/1000) # F = 1000
> compute in6 (1000/131)*@, @/(1000/131) # F = 131
> # compute in7 (1000/x)*@, @/(1000/x) # F = ?
> # compute in8 (1000/x)*@, @/(1000/x) # F = ?
> compute in9 (1000/333)*@, @/(1000/333) # F = 333
>
> #---------------------------------------------------------------------------
>
> # set limits to 5% for the critical voltages
> # set limits to 10% for the non-critical voltages
> # set limits to 20% for the battery voltage
>
> set in0_min 1.35*0.95
> set in0_max 1.35*1.05
> set in1_min 1.8*0.95
> set in1_max 1.8*1.05
> set in2_min 3.3 * 0.95
> set in2_max 3.3 * 1.05
> set in3_min 3.3 * 0.95
> set in3_max 3.3 * 1.05
> set in4_min 0.9 * 0.95
> set in4_max 0.9 * 1.05
> set in5_min 1.2 * 0.95
> set in5_max 1.2 * 1.05
> set in6_min 12.0 * 0.95
> set in6_max 12.0 * 1.05
> set in7_min 3.3 * 0.90
> set in7_max 3.3 * 1.10
> set in8_min 3.0 * 0.80
> set in8_max 3.0 * 1.20
> set in9_min 5.0 * 0.95
> set in9_max 5.0 * 1.05
>
> set fan1_min 2000
> set fan2_min 2000
>
> set temp1_over 50
> set temp1_hyst 45
> set temp2_over 65
> set temp2_hyst 60
> set temp3_over 70
> set temp3_hyst 65
>
> #---------------------------------------------------------------------------
>
--
Jean Delvare
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-12-03 10:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-02 14:16 [lm-sensors] Sending config for ABit NF-M2 MC Castle
2006-12-03 10:29 ` Jean Delvare
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.