From: Thomas.Dohl@gmx.de (Thomas Dohl)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors]
Date: Sun, 03 Dec 2006 20:20:01 +0000 [thread overview]
Message-ID: <45733171.9020903@gmx.de> (raw)
In-Reply-To: <87ekb9s3tn.wl%info@wore.ma.cx>
Hi Udo,
I've found a strange bug or what ever in the Module. :)
I'll try to explain it.
If I boot Linux with the module "w83627hf", everything
is ok. But if I load the module with the workaround, like
"modprobe w83627hf reset=1" I get a 23?C higher temperature
of the second sensor.
At boottime:
temp1: 34?C
temp2: 33?C
after modprobe with reset=1
temp1: 34?C
temp2: 56?C (23?C more than it is)
This doesn't change after rmmod w83627hf, modprobe w83627hf.
Only after reboot, the values return to normal.
What could that be?
Regards
Thomas Dohl
(from Germany)
Udo van den Heuvel schrieb:
> in modprobe.conf:
>
> options w83627hf reset=1
>
>
> I have a VIA EK8000 which has a similar problem. This is a workaround.
> Please post if it works.
>
next prev parent reply other threads:[~2006-12-03 20:20 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-11 10:20 [lm-sensors] wore
2005-10-26 22:17 ` [lm-sensors] Mauro Carvalho Chehab
2005-10-26 22:40 ` [lm-sensors] Greg KH
2005-10-26 22:46 ` [lm-sensors] Jean Delvare
2005-10-27 14:03 ` [lm-sensors] Mauro Carvalho Chehab
2005-10-27 16:53 ` [lm-sensors] Mauro Carvalho Chehab
2005-10-27 23:07 ` [lm-sensors] Jean Delvare
2005-10-27 23:43 ` [lm-sensors] Jean Delvare
2006-05-05 19:34 ` [lm-sensors] Dieter Jurzitza
2006-05-05 20:53 ` [lm-sensors] Dieter Jurzitza
2006-05-30 8:53 ` [lm-sensors] Laurent Pinchart
2006-12-03 8:22 ` [lm-sensors] Udo van den Heuvel
2006-12-03 8:38 ` [lm-sensors] Thomas Dohl
2006-12-03 8:49 ` [lm-sensors] Udo van den Heuvel
2006-12-03 20:20 ` Thomas Dohl [this message]
2007-01-08 7:39 ` [lm-sensors] Christophe de Rivière
2007-04-15 7:48 ` [lm-sensors] jk
2007-05-10 17:36 ` [lm-sensors] Dieter Rogiest
2007-05-10 18:02 ` [lm-sensors] Hans-Jürgen Koch
2007-05-10 18:46 ` [lm-sensors] Stephen Cormier
2007-05-10 19:31 ` [lm-sensors] Rudolf Marek
2007-05-10 20:34 ` [lm-sensors] Dieter Rogiest
2007-05-10 22:28 ` [lm-sensors] Rudolf Marek
2007-05-10 22:40 ` [lm-sensors] Dieter Rogiest
2007-07-24 12:06 ` [lm-sensors] Jean Delvare
2007-07-24 12:57 ` [lm-sensors] Christian Hohnstaedt
2007-07-24 13:09 ` [lm-sensors] Jean Delvare
2007-07-24 13:43 ` [lm-sensors] Christian Hohnstaedt
2007-08-12 11:13 ` [lm-sensors] Jean Delvare
2007-08-13 8:39 ` [lm-sensors] Christian Hohnstaedt
2007-08-13 12:29 ` [lm-sensors] Jean Delvare
2007-08-15 15:32 ` [lm-sensors] Christian Hohnstaedt
2007-08-15 19:28 ` [lm-sensors] Jean Delvare
2007-08-16 8:08 ` [lm-sensors] Christian Hohnstaedt
2007-10-07 18:38 ` [lm-sensors] Hans de Goede
2007-10-07 19:33 ` [lm-sensors] Mark M. Hoffman
2007-10-31 15:29 ` [lm-sensors] Hans de Goede
2008-06-01 10:15 ` [lm-sensors] Dominik Geyer
2008-09-17 13:50 ` [lm-sensors] Frank Myhr
2010-03-09 22:50 ` [lm-sensors] Phillip Pi
2010-10-31 7:42 ` [lm-sensors] Zamzit
2011-01-20 20:04 ` [lm-sensors] Guenter Roeck
2011-01-24 21:20 ` [lm-sensors] Yu, Fenghua
2011-03-28 18:11 ` [lm-sensors] R, Durgadoss
2011-04-05 17:47 ` [lm-sensors] Guenter Roeck
2011-04-06 6:54 ` [lm-sensors] R, Durgadoss
2011-04-06 7:18 ` [lm-sensors] Guenter Roeck
2011-06-21 9:44 ` [lm-sensors] Jay Alexander Fleming
2011-06-23 21:30 ` [lm-sensors] Valentijn Scholten
2011-06-24 22:01 ` [lm-sensors] Valentijn Scholten
2011-06-25 18:44 ` [lm-sensors] Valentijn Scholten
2011-10-01 13:38 ` [lm-sensors] Maryvonne JUDIT
2011-10-23 14:53 ` [lm-sensors] Malika et Christophe CHARBONNIER
2011-12-22 9:33 ` [lm-sensors] serge chartrain
-- strict thread matches above, loose matches on Subject: below --
2007-04-10 13:02 [lm-sensors] Hardware monitoring subsystem maintainer position is Jean Delvare
2007-04-12 5:57 ` [lm-sensors] Hardware monitoring subsystem maintainer Krzysztof Helt
2007-04-12 7:27 ` [lm-sensors] Hardware monitoring subsystem Hans de Goede
2007-04-15 2:07 ` [lm-sensors] Dmitry Torokhov
2008-09-18 8:12 [lm-sensors] + Sebastian Siewior
2008-09-18 8:15 ` Sebastian Siewior
2008-09-18 8:25 ` Andrew Morton
2008-09-18 9:08 ` Sebastian Siewior
2008-09-18 20:02 ` Jean Delvare
2008-09-18 21:13 ` Andrew Morton
2008-09-19 13:13 ` Jean Delvare
2009-06-12 15:25 [lm-sensors] =?UTF-8?Q?Re: [PATCH] hwmon: Add driver for VIA CPU tomaz.mertelj
2009-06-12 15:31 ` [lm-sensors] " Michael S. Zick
2009-06-12 16:04 ` Michael S. Zick
2009-06-12 17:38 ` [lm-sensors] Michael S. Zick
2009-06-12 18:16 [lm-sensors] =?UTF-8?Q?Re: [PATCH] hwmon: Add driver for VIA CPU tomaz.mertelj
2009-06-12 18:20 ` [lm-sensors] Michael S. Zick
2009-11-14 9:09 [lm-sensors] + Jean Delvare
2010-12-20 6:06 Patch[1/2]X86:Adding_Notification_Support_to_therm_throt.c R, Durgadoss
2010-12-20 6:18 ` [lm-sensors] R, Durgadoss
2010-12-28 10:25 Patch[1/2]X86:Adding_Notification_Support_to_therm_throt.c R, Durgadoss
2010-12-28 10:37 ` [lm-sensors] R, Durgadoss
2010-12-28 10:38 [lm-sensors] Patch[2/2]:hwmon:Adding_Threshold_Support_to_Coretemp.c R, Durgadoss
2011-01-04 19:40 ` [lm-sensors] Guenter Roeck
2011-01-03 11:52 Patch[1/2]X86:Adding_Notification_Support_to_therm_throt.c R, Durgadoss
2011-01-03 11:54 ` [lm-sensors] R, Durgadoss
2011-01-03 15:03 ` [lm-sensors] Guenter Roeck
2011-01-03 15:03 ` Patch[1/2]X86:Adding_Notification_Support_to_therm_throt.c Guenter Roeck
2011-01-03 15:11 ` Patch[1/2]X86:Adding_Notification_Support_to_therm_throt.c R, Durgadoss
2011-01-03 15:23 ` [lm-sensors] R, Durgadoss
2011-01-03 15:38 ` [lm-sensors] Guenter Roeck
2011-01-03 15:38 ` Patch[1/2]X86:Adding_Notification_Support_to_therm_throt.c Guenter Roeck
2011-01-04 8:56 ` Patch[1/2]X86:Adding_Notification_Support_to_therm_throt.c R, Durgadoss
2011-01-04 9:08 ` [lm-sensors] R, Durgadoss
2011-01-04 8:20 ` [tip:x86/hwmon] x86, hwmon: Add core threshold notification to therm_throt.c tip-bot for R, Durgadoss
2011-01-04 8:29 ` R, Durgadoss
2011-01-20 7:57 [lm-sensors] patch[1/1]:hwmon:Adding_Threshold_support_to_coretemp R, Durgadoss
2011-01-20 22:17 ` [lm-sensors] Fenghua Yu
2011-01-21 2:26 ` [lm-sensors] Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45733171.9020903@gmx.de \
--to=thomas.dohl@gmx.de \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.