Re: [lm-sensors]

[Dominik Geyer <dominik.geyer@gmx.de>]

Bruno Prémont <bonbons <at> linux-vserver.org> writes:

> 
> On a Commell LE-365 I get readings for fan speed that are broken about
> 10% of the time.
> The board has a Winbond W83697 chip (I can't check the exact chip name
> on the board as it's hidden by a heatsink, the photo from Commell, as
> as well as the manual indicate a HG, the kenrel reports:
>   [    3.572831] w83627hf: Found W83697HF chip at 0x290
>   [    3.572831] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O 
chip initialising.
>   [    3.572831] w83627hf/thf/hg WDT: Watchdog already running. Resetting 
timeout to 60 sec
>   [    3.572831] w83627hf/thf/hg WDT: initialized. timeout` sec 
(nowayout=0)
> )

Hm, thats strange. I've got a VIA-EPIA-EK8000EG with a W83697HG as well and 
didn't have any wrong readings with fan_input (2.6.25.3 kernel).

By the way: I noticed that you are using the w83627hf_wdt in your 
kernel-config. Did you already test the watchdog? On my board the w83627hf_wdt 
loads correctly but does not work. I'm using the w83697_wdt instead. 

--
Dominik Geyer


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors