All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Garzik <jeff@garzik.org>
To: Arjan van de Ven <arjan@linux.intel.com>
Cc: netdev@vger.kernel.org
Subject: Re: [patch 04/14] e1000: consolidate managability enabling/disabling
Date: Fri, 15 Dec 2006 09:32:30 -0500	[thread overview]
Message-ID: <4582B1FE.5070801@garzik.org> (raw)
In-Reply-To: <1166175176.3365.118.camel@laptopd505.fenrus.org>

Arjan van de Ven wrote:
> +static void
> +e1000_init_manageability(struct e1000_adapter *adapter)
> +{
> +	if (adapter->en_mng_pt) {
> +		uint32_t manc2h = E1000_READ_REG(&adapter->hw, MANC2H);
> +		uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
> +
> +		/* disable hardware interception of ARP */
> +		manc &= ~(E1000_MANC_ARP_EN);
> +
> +		/* enable receiving management packets to the host */
> +		/* this will probably generate destination unreachable messages
> +		 * from the host OS, but the packets will be handled on SMBUS */
> +		if (adapter->hw.mac_type >= e1000_82571) {
> +			manc |= E1000_MANC_EN_MNG2HOST;
> +#define E1000_MNG2HOST_PORT_623 (1 << 5)
> +#define E1000_MNG2HOST_PORT_664 (1 << 6)
> +			manc2h |= E1000_MNG2HOST_PORT_623;
> +			manc2h |= E1000_MNG2HOST_PORT_664;
> +			E1000_WRITE_REG(&adapter->hw, MANC2H, manc2h);
> +		}
> +
> +		E1000_WRITE_REG(&adapter->hw, MANC, manc);
> +	}
> +}
> +
> +static void
> +e1000_release_manageability(struct e1000_adapter *adapter)
> +{
> +	if (adapter->en_mng_pt) {
> +		uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
> +
> +		/* re-enable hardware interception of ARP */
> +		manc |= E1000_MANC_ARP_EN;
> +
> +		if (adapter->hw.mac_type >= e1000_82571)
> +			manc &= ~E1000_MANC_EN_MNG2HOST;
> +
> +		/* don't explicitly have to mess with MANC2H since
> +		 * MANC has an enable disable that gates MANC2H */
> +
> +		E1000_WRITE_REG(&adapter->hw, MANC, manc);
> +	}
> +}

This patch adds more error-probe mac_type tests, rather than a simple 
and tough-to-screw-up E1000_HAS_MGMT feature bit.


> +	/* If the controller is 82573 and f/w is AMT, do not set
> +	 * DRV_LOAD until the interface is up.  For all other cases,
> +	 * let the f/w know that the h/w is now under the control
> +	 * of the driver. */
> +	if (adapter->hw.mac_type != e1000_82573 ||
> +	    !e1000_check_mng_mode(&adapter->hw))
> +		e1000_get_hw_control(adapter);
>  
> -	if (netif_running(netdev))
> -		mod_timer(&adapter->watchdog_timer, jiffies);

ditto


  reply	other threads:[~2006-12-15 14:32 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-12-15  9:28 [patch 00/14] E1000 bugfix series for 2.6.20 Arjan van de Ven
2006-12-15  9:29 ` [patch 01/14] e1000: The user-supplied itr setting needs the lower 2 bits masked off Arjan van de Ven
2006-12-15  9:30 ` [patch 02/14] e1000: dynamic itr: take TSO and jumbo into account Arjan van de Ven
2006-12-15  9:31 ` [patch 03/14] e1000: omit stats for broken counter in 82543 Arjan van de Ven
2006-12-15 14:30   ` Jeff Garzik
2006-12-15 14:33     ` Arjan van de Ven
2006-12-15 14:50       ` Jeff Garzik
2006-12-15 15:37   ` Jeff Garzik
2006-12-15  9:32 ` [patch 04/14] e1000: consolidate managability enabling/disabling Arjan van de Ven
2006-12-15 14:32   ` Jeff Garzik [this message]
2006-12-15 15:57   ` Jeff Garzik
2006-12-15  9:33 ` [patch 05/14] e1000: Fix Wake-on-Lan with forced gigabit speed Arjan van de Ven
2006-12-15 14:33   ` Jeff Garzik
2006-12-15 16:00   ` Jeff Garzik
2006-12-15  9:34 ` [patch 06/14] e1000: disable TSO on the 82544 with slab debugging Arjan van de Ven
2006-12-15 14:33   ` Jeff Garzik
2006-12-16  1:04     ` Herbert Xu
2006-12-16 20:18       ` Jesse Brandeburg
2006-12-26 21:28       ` Jeff Garzik
2006-12-15  9:35 ` [patch 07/14] e1000: workaround for the ESB2 NIC RX unit issue Arjan van de Ven
2006-12-15 14:33   ` Jeff Garzik
2006-12-15  9:36 ` [patch 08/14] e1000: fix to set the new max frame size before resetting the adapter Arjan van de Ven
2006-12-15  9:37 ` [patch 09/14] e1000: fix ethtool reported bus type for older adapters Arjan van de Ven
2006-12-15 14:34   ` Jeff Garzik
2006-12-15  9:38 ` [patch 10/14] e1000: narrow down the scope of the tipg timer tweak Arjan van de Ven
2006-12-15 14:34   ` Jeff Garzik
2006-12-15  9:39 ` [patch 11/14] e1000: Fix PBA allocation calculations Arjan van de Ven
2006-12-15  9:40 ` [patch 12/14] e1000: Make the copybreak value a module parameter Arjan van de Ven
2006-12-15 14:35   ` Jeff Garzik
2006-12-15 16:09   ` Jeff Garzik
2006-12-15  9:41 ` [patch 13/14] e1000: 3 new driver stats for managability testing Arjan van de Ven
2006-12-15 14:35   ` Jeff Garzik
2006-12-15 16:17   ` Jeff Garzik
2006-12-15  9:42 ` [patch 14/14] e1000: No-delay link detection at interface up Arjan van de Ven
2006-12-15 14:36   ` Jeff Garzik
2006-12-15 14:37     ` Arjan van de Ven
2006-12-15 14:50       ` Jeff Garzik
2006-12-15 14:02 ` [patch 00/14] E1000 bugfix series for 2.6.20 Jeff Garzik
2006-12-15 14:04   ` Arjan van de Ven
2006-12-15 14:07     ` Jeff Garzik
2006-12-15 14:08       ` Arjan van de Ven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4582B1FE.5070801@garzik.org \
    --to=jeff@garzik.org \
    --cc=arjan@linux.intel.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.