* [lm-sensors] ADT7476
2006-12-27 22:36 [lm-sensors] ADT7476 David Liontooth
@ 2006-12-28 21:20 ` David Liontooth
2006-12-29 18:36 ` David Liontooth
2007-01-09 14:19 ` Jean Delvare
2 siblings, 0 replies; 4+ messages in thread
From: David Liontooth @ 2006-12-28 21:20 UTC (permalink / raw)
To: lm-sensors
David Liontooth wrote:
> What's the status of support for the ADT7476?
>
> Driver `to-be-written' (should be inserted):
> Detects correctly:
> * Bus `SMBus PIIX4 adapter at 0580'
> Busdriver `i2c-piix4', I2C address 0x2e
> Chip `Analog Devices ADT7476' (confidence: 7)
>
> I have these on Tyan Tomcat K8SH (S3850G2NR) motherboards and am happy
> to provide details
# uname -a
Linux 2.6.19.1 #1 SMP Mon Dec 18 14:33:18 PST 2006 x86_64 GNU/Linux
OS is Debian sid, the kernel is the latest stable from kernel.org
compiled with gcc 4.1.
# lspci
00:01.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge
00:02.0 Host bridge: Broadcom HT1000 Legacy South Bridge
00:02.1 IDE interface: Broadcom HT1000 Legacy IDE controller
00:02.2 ISA bridge: Broadcom HT1000 LPC Bridge
00:03.0 USB Controller: Broadcom HT1000 USB Controller (rev 01)
00:03.1 USB Controller: Broadcom HT1000 USB Controller (rev 01)
00:03.2 USB Controller: Broadcom HT1000 USB Controller (rev 01)
00:04.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit
Ethernet Controller (rev 05)
00:05.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit
Ethernet Controller (rev 05)
00:06.0 VGA compatible controller: XGI - Xabre Graphics Inc Volari Z7
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:0d.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2)
01:0e.0 RAID bus controller: Broadcom BCM5785 (HT1000) SATA Native SATA Mode
# lsmod
Module Size Used by
thermal 17296 0
fan 6280 0
processor 22332 1 thermal
eeprom 8912 0
i2c_isa 7104 0
i2c_dev 9032 0
ata_generic 9156 0
evdev 12160 0
k8temp 6976 0
sata_svw 10180 2
ehci_hcd 34760 0
ohci_hcd 22596 0
hwmon 4296 1 k8temp
e1000 127296 0
psmouse 43792 0
i2c_piix4 10444 0
pata_serverworks 12176 0
i2c_core 25984 7 eeprom,i2c_isa,i2c_dev,i2c_piix4
# ./sensors-detect.pl (downloaded from lm-sensors yesterday)
# sensors-detect revision $Revision$
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-piix4' for device 0000:00:02.0: ServerWorks HT-1000
South Bridge
We will now try to load each adapter module in turn.
Module `i2c-piix4' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: SMBus PIIX4 adapter at 0580 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x1b
Probing for `Maxim MAX6650/MAX6651'... No
Probing for `Philips Semiconductors PCA9556'... No
Client found at address 0x2e
Probing for `Myson MTP008'... No
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM78-J'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM85 or LM96000'... No
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... No
Probing for `Analog Devices ADT7462'... No
Probing for `Analog Devices ADT7467 or ADT7468'... No
Probing for `Analog Devices ADT7470'... No
Probing for `Analog Devices ADT7473'... No
Probing for `Analog Devices ADT7475'... No
Probing for `Analog Devices ADT7476'... Success!
(confidence 7, driver `to-be-written')
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `National Semiconductor LM93'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Winbond W83791SD'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Winbond W83L785TS-S'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Analog Devices ADM1024'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `Analog Devices ADM1028'... No
Probing for `ITE IT8712F'... No
Probing for `SMSC DME1737'... No
Probing for `Fintek F75373S/SG'... No
Probing for `Fintek F75375S/SP'... No
Probing for `Fintek F75387SG/RG'... No
Probing for `Winbond W83791D'... No
Client found at address 0x40
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Client found at address 0x50
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x51
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x69
Client found at address 0x6c
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `Winbond W83627HF' at 0x290... No
Probing for `Silicon Integrated Systems SIS5595'... No
Probing for `VIA VT82C686 Integrated Sensors'... No
Probing for `VIA VT8231 Integrated Sensors'... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'... No
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'... Yes
Found unknown chip with ID 0xee19
Trying family `National Semiconductor'... Yes
Found `Nat. Semi. PC8741x Super IO'
(no hardware monitoring capabilities)
Trying family `SMSC'... Yes
Found unknown chip with ID 0xee19
Trying family `VIA/Winbond/Fintek'... Yes
Found unknown chip with ID 0xee19
Some CPUs or memory controllers may also contain embedded sensors.
Do you want to scan for them? (YES/no):
AMD K8 thermal sensors... Success!
(driver `k8temp')
Intel Core family thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
^ permalink raw reply [flat|nested] 4+ messages in thread* [lm-sensors] ADT7476
2006-12-27 22:36 [lm-sensors] ADT7476 David Liontooth
2006-12-28 21:20 ` David Liontooth
@ 2006-12-29 18:36 ` David Liontooth
2007-01-09 14:19 ` Jean Delvare
2 siblings, 0 replies; 4+ messages in thread
From: David Liontooth @ 2006-12-29 18:36 UTC (permalink / raw)
To: lm-sensors
David Liontooth wrote:
> David Liontooth wrote:
>
>> What's the status of support for the ADT7476?
>>
>> Driver `to-be-written' (should be inserted):
>> Detects correctly:
>> * Bus `SMBus PIIX4 adapter at 0580'
>> Busdriver `i2c-piix4', I2C address 0x2e
>> Chip `Analog Devices ADT7476' (confidence: 7)
>>
>> I have these on Tyan Tomcat K8SH (S3850G2NR) motherboards and am happy
>> to provide details.
>>
# i2cdump 0 0x2e b
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2e, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
20: c0 70 bf c1 c1 29 20 22 ff ff c1 06 57 04 ff ff ?p???) "..??W?..
30: ff ff ff 00 00 00 00 00 ff ff ff 00 00 76 41 69 .............vAi
40: 05 00 00 0a 00 ff 00 ff 00 ff 00 ff 00 ff 81 7f ?..?..........??
50: 81 7f 81 7f ff ff ff ff ff ff ff ff 62 62 62 aa ????........bbb?
60: aa aa 00 00 80 80 80 5a 5a 5a 64 64 64 44 40 00 ??..???ZZZdddD at .
70: 00 00 f8 00 00 00 86 9b 00 00 00 55 01 00 00 00 ..?...??...U?...
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
For comparison, here is what Reuben Farrelly
<mailto:lm-sensors%40lm-sensors.org?Subject=%5Blm-sensors%5D%20Analogue%20Devices%20ADT7476ARQZ%20chip%20status&In-Reply-To 051126105212.51a1b259.khali%40linux-fr.org>posted
on Nov 26, 2005:
[root at typhoon <http://lists.lm-sensors.org/mailman/listinfo/lm-sensors> ~]# i2cdump 0 0x2e b
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2e, mode byte
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
20: 77 6c c3 c5 be 36 29 27 62 0c 57 0d 46 36 ff ff wl???6)'b?W?F6..
30: 33 4c 4c 00 00 00 00 00 ff ff ff 00 00 76 41 69 3LL..........vAi
40: 05 00 00 00 00 ff 00 ff 00 ff 00 ff 00 ff 81 7f ?.............??
50: 81 7f 81 7f ff ff ff ff ff ff ff ff 02 22 22 7a ????........?""z
60: 8a 80 e8 88 33 4c 4c 38 2d 2d 45 41 41 24 40 00 ????3LL8--EAA$@.
70: 00 00 00 00 00 00 1a 23 f0 00 00 55 01 00 00 00 ......?#?..U?...
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
http://lists.lm-sensors.org/pipermail/lm-sensors/2005-November/014454.html
Descriptions of the Tyan S3850G2NR Tomcat K8SH Opteron 939 Motherboard
(e.g., http://www.digiconcepts.com/tyan_motherboards_74.htm) confirm it
has the ADT7476.
The second request for support is at
http://lists.lm-sensors.org/pipermail/lm-sensors/2006-June/016564.html,
with a summary at
http://lists.lm-sensors.org/pipermail/lm-sensors/2006-June/016568.html.
Dave
> # uname -a
> Linux 2.6.19.1 #1 SMP Mon Dec 18 14:33:18 PST 2006 x86_64 GNU/Linux
>
> OS is Debian sid, the kernel is the latest stable from kernel.org
> compiled with gcc 4.1.
>
> # lspci
> 00:01.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge
> 00:02.0 Host bridge: Broadcom HT1000 Legacy South Bridge
> 00:02.1 IDE interface: Broadcom HT1000 Legacy IDE controller
> 00:02.2 ISA bridge: Broadcom HT1000 LPC Bridge
> 00:03.0 USB Controller: Broadcom HT1000 USB Controller (rev 01)
> 00:03.1 USB Controller: Broadcom HT1000 USB Controller (rev 01)
> 00:03.2 USB Controller: Broadcom HT1000 USB Controller (rev 01)
> 00:04.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit
> Ethernet Controller (rev 05)
> 00:05.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit
> Ethernet Controller (rev 05)
> 00:06.0 VGA compatible controller: XGI - Xabre Graphics Inc Volari Z7
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:0d.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2)
> 01:0e.0 RAID bus controller: Broadcom BCM5785 (HT1000) SATA Native SATA Mode
>
> # lsmod
> Module Size Used by
> thermal 17296 0
> fan 6280 0
> processor 22332 1 thermal
> eeprom 8912 0
> i2c_isa 7104 0
> i2c_dev 9032 0
> ata_generic 9156 0
> evdev 12160 0
> k8temp 6976 0
> sata_svw 10180 2
> ehci_hcd 34760 0
> ohci_hcd 22596 0
> hwmon 4296 1 k8temp
> e1000 127296 0
> psmouse 43792 0
> i2c_piix4 10444 0
> pata_serverworks 12176 0
> i2c_core 25984 7 eeprom,i2c_isa,i2c_dev,i2c_piix4
>
> # ./sensors-detect.pl (downloaded from lm-sensors yesterday)
> # sensors-detect revision $Revision$
>
> This program will help you determine which kernel modules you need
> to load to use lm_sensors most effectively. It is generally safe
> and recommended to accept the default answers to all questions,
> unless you know what you're doing.
>
> We can start with probing for (PCI) I2C or SMBus adapters.
> Do you want to probe now? (YES/no):
> Probing for PCI bus adapters...
> Use driver `i2c-piix4' for device 0000:00:02.0: ServerWorks HT-1000
> South Bridge
>
> We will now try to load each adapter module in turn.
> Module `i2c-piix4' already loaded.
> If you have undetectable or unsupported adapters, you can have them
> scanned by manually loading the modules before running this script.
>
> We are now going to do the I2C/SMBus adapter probings. Some chips may
> be double detected; we choose the one with the highest confidence
> value in that case.
> If you found that the adapter hung after probing a certain address,
> you can specify that address to remain unprobed.
>
> Next adapter: SMBus PIIX4 adapter at 0580 (i2c-0)
> Do you want to scan it? (YES/no/selectively):
> Client found at address 0x1b
> Probing for `Maxim MAX6650/MAX6651'... No
> Probing for `Philips Semiconductors PCA9556'... No
> Client found at address 0x2e
> Probing for `Myson MTP008'... No
> Probing for `National Semiconductor LM78'... No
> Probing for `National Semiconductor LM78-J'... No
> Probing for `National Semiconductor LM79'... No
> Probing for `National Semiconductor LM80'... No
> Probing for `National Semiconductor LM85 or LM96000'... No
> Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... No
> Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... No
> Probing for `Analog Devices ADT7462'... No
> Probing for `Analog Devices ADT7467 or ADT7468'... No
> Probing for `Analog Devices ADT7470'... No
> Probing for `Analog Devices ADT7473'... No
> Probing for `Analog Devices ADT7475'... No
> Probing for `Analog Devices ADT7476'... Success!
> (confidence 7, driver `to-be-written')
> Probing for `Andigilog aSC7611'... No
> Probing for `Andigilog aSC7621'... No
> Probing for `National Semiconductor LM87'... No
> Probing for `National Semiconductor LM93'... No
> Probing for `Winbond W83781D'... No
> Probing for `Winbond W83782D'... No
> Probing for `Winbond W83792D'... No
> Probing for `Winbond W83793R/G'... No
> Probing for `Winbond W83791SD'... No
> Probing for `Winbond W83627HF'... No
> Probing for `Winbond W83627EHF'... No
> Probing for `Winbond W83627DHG'... No
> Probing for `Asus AS99127F (rev.1)'... No
> Probing for `Asus AS99127F (rev.2)'... No
> Probing for `Asus ASB100 Bach'... No
> Probing for `Winbond W83L785TS-S'... No
> Probing for `Analog Devices ADM9240'... No
> Probing for `Dallas Semiconductor DS1780'... No
> Probing for `National Semiconductor LM81'... No
> Probing for `Analog Devices ADM1026'... No
> Probing for `Analog Devices ADM1025'... No
> Probing for `Analog Devices ADM1024'... No
> Probing for `Analog Devices ADM1029'... No
> Probing for `Analog Devices ADM1030'... No
> Probing for `Analog Devices ADM1031'... No
> Probing for `Analog Devices ADM1022'... No
> Probing for `Texas Instruments THMC50'... No
> Probing for `Analog Devices ADM1028'... No
> Probing for `ITE IT8712F'... No
> Probing for `SMSC DME1737'... No
> Probing for `Fintek F75373S/SG'... No
> Probing for `Fintek F75375S/SP'... No
> Probing for `Fintek F75387SG/RG'... No
> Probing for `Winbond W83791D'... No
> Client found at address 0x40
> Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> Client found at address 0x50
> Handled by driver `eeprom' (already loaded), chip type `eeprom'
> Client found at address 0x51
> Handled by driver `eeprom' (already loaded), chip type `eeprom'
> Client found at address 0x69
> Client found at address 0x6c
>
> Some chips are also accessible through the ISA I/O ports. We have to
> write to arbitrary I/O ports to probe them. This is usually safe though.
> Yes, you do have ISA I/O ports even if you do not have any ISA slots!
> Do you want to scan the ISA I/O ports? (YES/no):
> Probing for `National Semiconductor LM78' at 0x290... No
> Probing for `National Semiconductor LM78-J' at 0x290... No
> Probing for `National Semiconductor LM79' at 0x290... No
> Probing for `Winbond W83781D' at 0x290... No
> Probing for `Winbond W83782D' at 0x290... No
> Probing for `Winbond W83627HF' at 0x290... No
> Probing for `Silicon Integrated Systems SIS5595'... No
> Probing for `VIA VT82C686 Integrated Sensors'... No
> Probing for `VIA VT8231 Integrated Sensors'... No
> Probing for `IPMI BMC KCS' at 0xca0... No
> Probing for `IPMI BMC SMIC' at 0xca8... No
>
> Some Super I/O chips may also contain sensors. We have to write to
> standard I/O ports to probe them. This is usually safe.
> Do you want to scan for Super I/O sensors? (YES/no):
> Probing for Super-I/O at 0x2e/0x2f
> Trying family `ITE'... No
> Trying family `National Semiconductor'... No
> Trying family `SMSC'... No
> Trying family `VIA/Winbond/Fintek'... No
> Probing for Super-I/O at 0x4e/0x4f
> Trying family `ITE'... Yes
> Found unknown chip with ID 0xee19
> Trying family `National Semiconductor'... Yes
> Found `Nat. Semi. PC8741x Super IO'
> (no hardware monitoring capabilities)
> Trying family `SMSC'... Yes
> Found unknown chip with ID 0xee19
> Trying family `VIA/Winbond/Fintek'... Yes
> Found unknown chip with ID 0xee19
>
> Some CPUs or memory controllers may also contain embedded sensors.
> Do you want to scan for them? (YES/no):
> AMD K8 thermal sensors... Success!
> (driver `k8temp')
> Intel Core family thermal sensor... No
> Intel AMB FB-DIMM thermal sensor... No
>
>
>
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors at lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
^ permalink raw reply [flat|nested] 4+ messages in thread* [lm-sensors] ADT7476
2006-12-27 22:36 [lm-sensors] ADT7476 David Liontooth
2006-12-28 21:20 ` David Liontooth
2006-12-29 18:36 ` David Liontooth
@ 2007-01-09 14:19 ` Jean Delvare
2 siblings, 0 replies; 4+ messages in thread
From: Jean Delvare @ 2007-01-09 14:19 UTC (permalink / raw)
To: lm-sensors
Hi David,
On Fri, 29 Dec 2006 10:36:14 -0800, David Liontooth wrote:
> http://lists.lm-sensors.org/pipermail/lm-sensors/2005-November/014454.html
>
> Descriptions of the Tyan S3850G2NR Tomcat K8SH Opteron 939 Motherboard
> (e.g., http://www.digiconcepts.com/tyan_motherboards_74.htm) confirm it
> has the ADT7476.
>
> The second request for support is at
> http://lists.lm-sensors.org/pipermail/lm-sensors/2006-June/016564.html,
> with a summary at
> http://lists.lm-sensors.org/pipermail/lm-sensors/2006-June/016568.html.
I've updated the ADT7476 entry in our Devices page to mention the two
other requests, for a total of 3. That's about all I can do for you,
sorry.
--
Jean Delvare
^ permalink raw reply [flat|nested] 4+ messages in thread