From: Paul Gardiner <osronline@glidos.net>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez
Date: Tue, 02 Jan 2007 21:03:48 +0000 [thread overview]
Message-ID: <459AC8B4.7090407@glidos.net> (raw)
In-Reply-To: <1167745840.30886.77.camel@violet>
Marcel Holtmann wrote:
> Hi Paul,
>
>>> And once again "hcidump -X -V" is your friend in showing what
>>> actually happens on the Bluetooth chip level.
>> Are there people on this list that might be willing to look over
>> a posted dump then? My problem with DUN produced a trace, but
>> I gave up on it because there was no way I could understand
>> it. Is it worth my posting a dump?
>
> depends on what level the problem actually is. If it is hidden somewhere
> in the PPP part it is unlikely that you get a fast answer. If it is
> something obvious you might get your problem solved very quickly. So it
> is always worth posting the hcidump.
Great. Thanks for at least having a look. I think the problem is
early on because I get nothing in my logs from dund.
Here it is:
HCI sniffer - Bluetooth packet analyzer ver 1.33
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:09:2D:08:BC:57 role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 42
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:09:2D:08:BC:57 mode 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Max Slots Change (0x1b) plen 3
handle 42 slots 5
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0200
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0200 result 0 status 0
Connection successful
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 42 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 42
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 42 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 42 ptype 0xff1e
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3
3-DH5
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 42
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0200 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0200 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 17
> ACL data: handle 42 flags 0x01 dlen 17
> ACL data: handle 42 flags 0x01 dlen 2
L2CAP(d): cid 0x0040 len 32 [psm 1]
SDP SSA Req: tid 0x0 len 0x1b
pat uuid-128 00001103-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 42 flags 0x02 dlen 52
L2CAP(d): cid 0x0200 len 48 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x2b
count 40
record #0
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
record #1
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
cont 00
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0201
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0201 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0200
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0200
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 0
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0201 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0201 flags 0x00 clen 4
MTU 1013
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0201 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 17
> ACL data: handle 42 flags 0x01 dlen 1
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 4 frame_type 0 credit_flow 15 pri 32 ack_timer 0
frame_size 1024 max_retrans 0 credits 7
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0201 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 4 pf 1 ilen 0 fcs 0xbc
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0201
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0201
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0202
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0202 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0202 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0202 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 17
> ACL data: handle 42 flags 0x01 dlen 17
> ACL data: handle 42 flags 0x01 dlen 2
L2CAP(d): cid 0x0040 len 32 [psm 1]
SDP SSA Req: tid 0x0 len 0x1b
pat uuid-128 00001103-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 42 flags 0x02 dlen 52
L2CAP(d): cid 0x0202 len 48 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x2b
count 40
record #0
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
record #1
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0203
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0203 result 0 status 0
Connection successful
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0202
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0202
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 0
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0203 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0203 flags 0x00 clen 4
MTU 1013
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0203 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 17
> ACL data: handle 42 flags 0x01 dlen 1
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 4 frame_type 0 credit_flow 15 pri 32 ack_timer 0
frame_size 1024 max_retrans 0 credits 7
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0203 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 4 pf 1 ilen 0 fcs 0xbc
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0203
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0203
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 42 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 42 reason 0x16
Reason: Connection Terminated by Local Host
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2007-01-02 21:03 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-02 7:54 [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez siddhant tewari
2007-01-02 8:09 ` Marcel Holtmann
2007-01-02 8:16 ` siddhant tewari
2007-01-02 8:28 ` Marcel Holtmann
2007-01-02 9:12 ` siddhant tewari
2007-01-02 10:18 ` Cris
2007-01-02 10:29 ` siddhant tewari
2007-01-02 11:44 ` Cris
2007-01-02 12:46 ` siddhant tewari
2007-01-02 13:04 ` Marcel Holtmann
2007-01-02 13:39 ` Paul Gardiner
2007-01-02 13:50 ` Marcel Holtmann
2007-01-02 21:03 ` Paul Gardiner [this message]
2007-01-02 21:18 ` Marcel Holtmann
2007-01-02 23:39 ` Paul Gardiner
2007-01-03 4:00 ` Tianlei Zhao
2007-01-03 7:18 ` Marcel Holtmann
2007-01-03 11:33 ` [Bluez-users] Problems fooling my S100 into using Bluez as a modem Paul Gardiner
2007-01-03 11:37 ` Paul Gardiner
2007-01-03 11:39 ` Paul Gardiner
2007-01-03 11:42 ` Paul Gardiner
2007-01-10 18:24 ` Paul Gardiner
2007-01-02 13:20 ` [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez Cris
2007-01-02 13:17 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=459AC8B4.7090407@glidos.net \
--to=osronline@glidos.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.