From: Paul Gardiner <osronline@glidos.net>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Problems fooling my S100 into using Bluez as a modem
Date: Wed, 03 Jan 2007 11:37:09 +0000 [thread overview]
Message-ID: <459B9565.3060306@glidos.net> (raw)
In-Reply-To: <459B947A.30803@glidos.net>
Paul Gardiner wrote:
> Also, I have to own up to something silly: when some of your
> statements seemed to imply that most of this should work
> without special configuration, I put the original config
> files in place, but didn't notice that dund was off by
> default. I'll post some new dumps with that corrected.
This is the dump of my S100 discovering Bluez. This is
without a preceding call to "sdptool add DUN", and
although the device is discovered, the S100 then
refuses to use it as a modem:
HCI sniffer - Bluetooth packet analyzer ver 1.33
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:09:2D:08:BC:57 role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 42
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:09:2D:08:BC:57 mode 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 42 slots 5
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 42 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 42
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 42 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 42 ptype 0xff1e
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3
3-DH5
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 42
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:09:2D:08:BC:57
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:09:2D:08:BC:57 len 4 pin '6969'
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:09:2D:08:BC:57
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:09:2D:08:BC:57 key 8293311B9D50705254DBEBA5259F9851 type 0
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 42 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:09:2D:08:BC:57 role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 43 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 43
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:09:2D:08:BC:57 mode 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 43 slots 5
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0055
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0055 result 0 status 0
Connection successful
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 43 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 43
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 43 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 43 ptype 0xff1e
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3
3-DH5
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 43
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0055 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0055 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 00001108-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x0055 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0055
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0055
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0056
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0056 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0056 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0056 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 0000111e-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x0056 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0056
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0056
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0057
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0057 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0057 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0057 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 00001103-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x0057 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0057
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0057
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0058
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0058 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0058 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0058 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 00001101-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 234
L2CAP(d): cid 0x0058 len 230 [psm 1]
SDP SSA Rsp: tid 0x0 len 0xe1
count 222
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10002
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1101 (SP) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x5 > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0100 (SrvName)
str "KBtSerialChat"
aid 0x0101 (SrvDesc)
str "KDE Bluetooth Serial Chat Service"
record #1
aid 0x0000 (SrvRecHndl)
uint 0x10003
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1101 (SP) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1b > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0100 (SrvName)
str "KDE Bemused Server"
aid 0x0101 (SrvDesc)
str "KDE Server for the Bemused remote control protocol"
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0058
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0058
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0059
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0059 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0059 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0059 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 0350278f-3dca-4e62-831d-a41165ff906c
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x0059 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0059
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0059
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 43 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 43 reason 0x16
Reason: Connection Terminated by Local Host
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2007-01-03 11:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-02 7:54 [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez siddhant tewari
2007-01-02 8:09 ` Marcel Holtmann
2007-01-02 8:16 ` siddhant tewari
2007-01-02 8:28 ` Marcel Holtmann
2007-01-02 9:12 ` siddhant tewari
2007-01-02 10:18 ` Cris
2007-01-02 10:29 ` siddhant tewari
2007-01-02 11:44 ` Cris
2007-01-02 12:46 ` siddhant tewari
2007-01-02 13:04 ` Marcel Holtmann
2007-01-02 13:39 ` Paul Gardiner
2007-01-02 13:50 ` Marcel Holtmann
2007-01-02 21:03 ` Paul Gardiner
2007-01-02 21:18 ` Marcel Holtmann
2007-01-02 23:39 ` Paul Gardiner
2007-01-03 4:00 ` Tianlei Zhao
2007-01-03 7:18 ` Marcel Holtmann
2007-01-03 11:33 ` [Bluez-users] Problems fooling my S100 into using Bluez as a modem Paul Gardiner
2007-01-03 11:37 ` Paul Gardiner [this message]
2007-01-03 11:39 ` Paul Gardiner
2007-01-03 11:42 ` Paul Gardiner
2007-01-10 18:24 ` Paul Gardiner
2007-01-02 13:20 ` [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez Cris
2007-01-02 13:17 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2007-01-16 19:10 [Bluez-users] Problems fooling my S100 into using Bluez as a modem Paul Gardiner
2007-01-18 13:13 ` Paul Gardiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=459B9565.3060306@glidos.net \
--to=osronline@glidos.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.