[lm-sensors] Intel motherborard S3000

[lm-sensors] Intel motherborard S3000

[Bernard Bramlage]

Hi,
I use Intel's motherboard S3000 with SuSe10.2. I check the hardware with sensors-dectect, but sensors could not find  the sensors. Is it correct or doI have to install some additonal drivers?

Regards
Bernard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20070106/1fecc60f/attachment.html 

[lm-sensors] Intel motherborard S3000

[Rudolf Marek]

Hi,

S3000 is perhaps just a chipset name. Can you find the correct motherboard name
please? (you may try to use the dmidecode utility for that)

Rudolf

[lm-sensors] Intel motherborard S3000

[Bernard Bramlage]

Hi,
the board name is Server Boards S3000AH
The manual descibe regarding to hardware monitoring:
The server board has implemented hardware monitoring function into the super 
I/O SCH5027

chip. The chip provides basic server hardware monitoring which alerts a 
system administrator if

a hardware problem occurs on the board. The SCH5027 chip has implemented 
some FAN

speed control/monitor pins. Below is a table of monitored headers and 
sensors on the server

board.

I could not finde any information about the SCH5027 in lm_sensors.

Regards
Bernard



> Hi,
>
> S3000 is perhaps just a chipset name. Can you find the correct motherboard 
> name
> please? (you may try to use the dmidecode utility for that)
>
> Rudolf 

[lm-sensors] Intel motherborard S3000

[Bernard Bramlage]

Hi,
I run dmidecode and found:

Processor Information
        Socket Designation: Intel(R) Genuine processor
        Type: Central Processor
        Family: <OUT OF SPEC>
        Manufacturer: Intel(R) Corporation
        ID: F6 06 00 00 FF FB EB BF
        Version: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz
        Voltage: 1.6 V
        External Clock: 266 MHz
        Max Speed: 4000 MHz
        Current Speed: 1866 MHz
        Status: Populated, Enabled
        Upgrade: Other
        Serial Number: Not Specified
        Asset Tag: Intel(R) Genuine processor
        Part Number: Not Specified

Base Board Information
        Manufacturer: Intel Corporation
        Product Name: S3000AHLX
        Version: D40858-204
        Serial Number: AZAX63701098
        Asset Tag: Not Specified
        Features:
                Board is a hosting board
                Board is replaceable
        Location In Chassis: Not Specified
        Type: Motherboard


Regards
Bernard
----- Original Message ----- 
From: "Rudolf Marek" <r.marek at assembler.cz>
To: "Bernard Bramlage" <Bernard at bramlage-aachen.de>
Cc: <lm-sensors at lm-sensors.org>
Sent: Sunday, January 07, 2007 3:25 PM
Subject: Re: [lm-sensors] Intel motherborard S3000


> Hi,
>
> S3000 is perhaps just a chipset name. Can you find the correct motherboard 
> name
> please? (you may try to use the dmidecode utility for that)
>
> Rudolf 

[lm-sensors] Intel motherborard S3000

[Bramlage, Chuck]

Bernard,
I'm Chuck Bramlage from the States.  My family history comes from
forefathers who came from Cloppenburg, Germany in the 1880s to the
Cincinnati Ohio area.  Can you share any of your family history?
 
Chuck Bramlage
President-Europe, Middle East & Africa
Valeant Pharmaceuticals International
One Enterprise
Aliso Viejo,  CA  92656
Tel: 949-461-6060
Fax: 949-461-6632
email: chuck.bramlage at valeant.com <mailto:chuck.bramlage at valeant.com> 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20070202/3e9db6aa/attachment.html 

[lm-sensors] Intel motherborard S3000

[Rudolf Marek]

Hello,

Sorry for the delay.

> the board name is Server Boards S3000AH
> The manual descibe regarding to hardware monitoring:
> The server board has implemented hardware monitoring function into the super 
> I/O SCH5027

Hmm I dont know this chip either. It seems it may live on ISA bus and maybe it
is compatible with SCH311xx.

Please can you try following and post the output back here?

isadump -k 0x55 0x2e 0x2f
isadump -k 0x87,0x87 0x2e 0x2f

(and full output of sensors-detect from lm-sensors)

Thanks,
Rudolf