All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] Enhanced Powersaver driver
@ 2007-01-11 17:58 Rafał Bilski
  0 siblings, 0 replies; 2+ messages in thread
From: Rafał Bilski @ 2007-01-11 17:58 UTC (permalink / raw)
  To: Dave Jones; +Cc: cpufreq


This is driver for Enhanced Powersaver which is present in VIA C7 
processors. Beta tested by Jorgen (jorgen (at) greven dot dk). 
Based on documentation provided by Dave Jones (Thanks!) and 
C7 Eden datasheet available from www.via.com.tw. Looks like all 
these C7 Eden CPU's don't have P-states in BIOS. I know that 
2 p-states is low, but Jorgen finds it usefull anyway because 
board is passive cooled.
Brand detection is necessary because:
"The VIA Eden can only change from the highest supported 
performance state to the lowest supported performance state: 
intermediate performance states are not guaranteed to work and 
are not officially supported."
There is no such statement in C7-M documentation, so I'm 
allowing any multiplier between min and max for C7 and C7-M.

Jorgen's dmesg:
> eps: Detected VIA Eden
> eps: Current voltage = 844mV
> eps: Current multiplier = 10
> eps: Highest voltage = 844mV
> eps: Highest multiplier = 10
> eps: Lowest voltage = 844mV
> eps: Lowest multiplier = 4

Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl>

---

diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -213,6 +213,12 @@ config X86_LONGHAUL
 
 	  If in doubt, say N.
 
+config X86_E_POWERSAVER
+	tristate "VIA C7 Enhanced PowerSaver"
+	select CPU_FREQ_TABLE
+	help
+	  If in doubt, say N.
+
 comment "shared options"
 
 config X86_ACPI_CPUFREQ_PROC_INTF
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
index 2e894f1..2ccde36 100644
--- a/arch/i386/kernel/cpu/cpufreq/Makefile
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
 obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
 obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
 obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
+obj-$(CONFIG_X86_E_POWERSAVER)		+= enhanced_powersaver.o
 obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
 obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
 obj-$(CONFIG_X86_LONGRUN)		+= longrun.o  
diff --git a/arch/i386/kernel/cpu/cpufreq/enhanced_powersaver.c b/arch/i386/kernel/cpu/cpufreq/enhanced_powersaver.c
new file mode 100644
index 0000000..4b6dc33
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/enhanced_powersaver.c
@@ -0,0 +1,383 @@
+/*
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/tsc.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#define EPS_BRAND_C7M	0
+#define EPS_BRAND_C7	1
+#define EPS_BRAND_EDEN	2
+#define EPS_BRAND_C3	3
+
+struct eps_cpu_data {
+	u32 fsb;
+	struct cpufreq_frequency_table freq_table[];
+};
+
+static struct eps_cpu_data *eps_cpu[NR_CPUS];
+
+/**
+ */
+static inline u32 calc_speed(u32 fsb, u8 mult)
+{
+	u32 khz;
+
+	khz = fsb * mult;
+	return khz;
+}
+
+static unsigned int eps_get(unsigned int cpu)
+{
+	struct eps_cpu_data *centaur;
+	u32 lo, hi;
+	u8 current_multiplier;
+	unsigned int kHz;
+
+	if (cpu)
+		return 0;
+	centaur = eps_cpu[cpu];
+	if (centaur == NULL)
+		return 0;
+	/* Return current frequency */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	current_multiplier = (lo >> 8) & 0xff;
+	kHz = calc_speed(centaur->fsb, current_multiplier);
+	return kHz;
+}
+
+/**
+ */
+static int eps_set_state(struct eps_cpu_data *centaur,
+			 unsigned int cpu,
+			 u32 dest_state)
+{
+	struct cpufreq_freqs freqs;
+	u32 lo, hi;
+	int i;
+
+	freqs.old = eps_get(cpu);
+	freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff);
+	freqs.cpu = cpu;
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Wait until transition end */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	i = 0;
+	while (lo & ((1 << 16) | (1 << 17))) {
+		udelay(64);
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		i++;
+		if (unlikely(i > 16)) goto timeout;
+	}
+	/* Set new multiplier and voltage */
+	wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0);
+	/* And processor will do the rest */
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	return 0;
+
+timeout:
+	printk(KERN_ERR "eps: Timeout! Aborting.\n");
+	return -ENODEV;
+}
+
+/**
+ */
+static int eps_target(struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int relation)
+{
+	struct eps_cpu_data *centaur;
+	unsigned int newstate = 0;
+	unsigned int cpu = policy->cpu;
+	unsigned int dest_state;
+	int ret;
+
+	if (unlikely(eps_cpu[cpu] == NULL))
+		return -ENODEV;
+	centaur = eps_cpu[cpu];
+
+	if (unlikely(cpufreq_frequency_table_target(policy,
+			&eps_cpu[cpu]->freq_table[0],
+			target_freq,
+			relation,
+			&newstate))) {
+		return -EINVAL;
+	}
+
+	/* Make frequency transition */
+	dest_state = centaur->freq_table[newstate].index & 0xffff;
+	ret = eps_set_state(centaur, cpu, dest_state);
+	return ret;
+}
+
+/**
+ */
+static int eps_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &eps_cpu[policy->cpu]->freq_table[0]);
+}
+
+/**
+ */
+
+static int eps_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	u32 lo, hi;
+	u64 val;
+	u8 current_multiplier, current_voltage;
+	u8 max_multiplier, max_voltage;
+	u8 min_multiplier, min_voltage;
+	u8 brand;
+	u32 fsb;
+	struct eps_cpu_data *centaur;
+	struct cpufreq_frequency_table *f_table;
+	int k, step, voltage;
+	int ret;
+	int states;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* Check brand */
+	printk("eps: Detected VIA ");
+	rdmsr(0x1153, lo, hi);
+	brand = (((lo >> 2) ^ lo) >> 18) & 3;
+	switch(brand) {
+	case EPS_BRAND_C7M:
+		printk("C7-M\n");
+		break;
+	case EPS_BRAND_C7:
+		printk("C7\n");
+		break;
+	case EPS_BRAND_EDEN:
+		printk("Eden\n");
+		break;
+	case EPS_BRAND_C3:
+		printk("C3\n");
+		return -ENODEV;
+		break;
+	}
+	/* Enable Enhanced PowerSaver */
+	rdmsrl(MSR_IA32_MISC_ENABLE, val);
+	if (!(val & 1 << 16)) {
+		val |= 1 << 16;
+		wrmsrl(MSR_IA32_MISC_ENABLE, val);
+		/* Can be locked at 0 */
+		rdmsrl(MSR_IA32_MISC_ENABLE, val);
+		if (!(val & 1 << 16)) {
+			printk("eps: Can't enable Enhanced PowerSaver\n");
+			return -ENODEV;
+		}
+	}
+
+	/* Print voltage and multiplier */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	current_voltage = lo & 0xff;
+	printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700);
+	current_multiplier = (lo >> 8) & 0xff;
+	printk("eps: Current multiplier = %d\n", current_multiplier);
+
+	/* Print limits */
+	max_voltage = hi & 0xff;
+	printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700);
+	max_multiplier = (hi >> 8) & 0xff;
+	printk("eps: Highest multiplier = %d\n", max_multiplier);
+	min_voltage = (hi >> 16) & 0xff;
+	printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700);
+	min_multiplier = (hi >> 24) & 0xff;
+	printk("eps: Lowest multiplier = %d\n", min_multiplier);
+
+	/* Sanity checks */
+	if (current_multiplier == 0 || max_multiplier == 0 
+	    || min_multiplier == 0) {
+		return -EINVAL;
+	}
+	if (current_multiplier > max_multiplier
+	    || max_multiplier <= min_multiplier) {
+		return -EINVAL;
+	}
+	if (current_voltage > 0x1c || max_voltage > 0x1c) {
+		return -EINVAL;
+	}
+	if (max_voltage < min_voltage) {
+		return -EINVAL;
+	}
+
+	/* Calc FSB speed */
+	fsb = cpu_khz / current_multiplier;
+	/* Calc number of p-states supported */
+	if (brand == EPS_BRAND_EDEN) {
+		states = 2;
+	} else {
+		states = max_multiplier - min_multiplier + 1;
+	}
+
+	/* Allocate private data and frequency table for current cpu */
+	centaur = kzalloc(sizeof(struct eps_cpu_data) 
+		    + (states + 1) * sizeof(struct cpufreq_frequency_table),
+		    GFP_KERNEL);
+	if (!centaur)
+		return -ENOMEM;
+	eps_cpu[0] = centaur;
+
+	/* Copy basic values */
+	centaur->fsb = fsb;
+
+	/* Fill frequency and MSR value table */
+	f_table = &centaur->freq_table[0];
+	if (brand == EPS_BRAND_EDEN) {
+		f_table[0].frequency = calc_speed(fsb, min_multiplier);
+		f_table[0].index = (min_multiplier << 8) | min_voltage;
+		f_table[1].frequency = calc_speed(fsb, max_multiplier);
+		f_table[1].index = (max_multiplier << 8) | max_voltage;
+		f_table[2].frequency = CPUFREQ_TABLE_END;
+	} else {
+		k = 0;
+		step = ((max_voltage - min_voltage) * 256) / (max_multiplier - min_multiplier);
+		for (i = min_multiplier; i <= max_multiplier; i++) {
+			voltage = (k * step) / 256 + min_voltage;
+			f_table[k].frequency = calc_speed(fsb, i);
+			f_table[k].index = (i << 8) | voltage;
+			k++;
+		}
+		f_table[k].frequency = CPUFREQ_TABLE_END;
+	}
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */
+	policy->cur = calc_speed(fsb, current_multiplier);
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, &centaur->freq_table[0]);
+	if (ret) {
+		kfree(centaur);
+		return ret;
+	}
+
+	cpufreq_frequency_table_get_attr(&centaur->freq_table[0], policy->cpu);
+	return 0;
+}
+
+
+static int eps_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	struct eps_cpu_data *centaur;
+	u32 lo, hi;
+
+	if (eps_cpu[cpu] == NULL)
+		return -ENODEV;
+	centaur = eps_cpu[cpu];
+
+	/* Get max frequency */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	/* Set max frequency */
+	eps_set_state(centaur, cpu, hi & 0xffff);
+	/* Bye */
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	kfree(eps_cpu[cpu]);
+	eps_cpu[cpu] = NULL;
+	return 0;
+}
+
+/**
+ */
+
+static ssize_t eps_show_temp(struct cpufreq_policy *policy, char *buf)
+{
+	unsigned int cpu = policy->cpu;
+	u32 i;
+	ssize_t count;
+	u32 temp;
+
+	if (eps_cpu[cpu] == NULL)
+		return -ENODEV;
+
+	/* Check Centaur Extended CPUID */
+	i = cpuid_eax(0xC0000000);
+	if (i > 0xC0000001) {
+		i = cpuid_eax(0xC0000002);
+		temp = i >> 8;
+	} else {
+		temp = 0;
+	}
+
+	count = sprintf(&buf[0], "%d\n", temp);
+	return count;
+}
+
+static struct freq_attr eps_current_temp = {
+	.attr = { .name = "cpuinfo_cur_temp",
+		  .mode = 0444,
+		  .owner = THIS_MODULE
+		},
+	.show = eps_show_temp,
+};
+
+static struct freq_attr* eps_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	&eps_current_temp,
+	NULL,
+};
+
+static struct cpufreq_driver eps_driver = {
+	.verify		= eps_verify,
+	.target		= eps_target,
+	.init		= eps_cpu_init,
+	.exit		= eps_cpu_exit,
+	.get		= eps_get,
+	.name		= "e_powersaver",
+	.owner		= THIS_MODULE,
+	.attr		= eps_attr,
+};
+
+
+/**
+ */
+static int __init eps_init(void)
+{
+	struct cpuinfo_x86      *c = cpu_data;
+
+	if (c->x86_vendor != X86_VENDOR_CENTAUR
+	    || c->x86 != 6
+	    || c->x86_model != 10) {
+		return -ENODEV;
+	}
+
+	if (!cpu_has(c, X86_FEATURE_EST))
+		return -ENODEV;
+
+	if (cpufreq_register_driver(&eps_driver)) {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/**
+ */
+static void __exit eps_exit(void)
+{
+	cpufreq_unregister_driver(&eps_driver);
+}
+
+MODULE_AUTHOR ("Rafa³ Bilski");
+MODULE_DESCRIPTION ("Enhanced PowerSaver driver for VIA C7 CPU's.");
+MODULE_LICENSE ("GPL");
+
+module_init(eps_init);
+module_exit(eps_exit);

----------------------------------------------------------------------
Nieograniczona pojemnosc skrzynki >>> http://link.interia.pl/f19e6

^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH] Enhanced PowerSaver driver
@ 2007-02-05 18:57 Rafał Bilski
  0 siblings, 0 replies; 2+ messages in thread
From: Rafał Bilski @ 2007-02-05 18:57 UTC (permalink / raw)
  To: Dave Jones; +Cc: cpufreq


This is driver for Enhanced Powersaver which is present in VIA C7 
processors. Beta tested by Jorgen (jorgen (at) greven dot dk). 
Thanks! Based on documentation provided by Dave Jones (Thanks!) 
and C7 Eden datasheet available from www.via.com.tw. Looks like all 
these C7 Eden CPU's don't have P-states in BIOS. I know that 2 
p-states is low, but Jorgen finds it usefull anyway because board 
is passive cooled.
There are 3 different types of C7 processors (called brands):
0. C7-M - these processors can set any maultiplier between min and 
max, any voltage between min and max.
1. C7 - only min and max states are supported. Voltage is different 
for min and max states.
2. Eden - only min and max states are supported. Looks like this 
brand can only change multiplier. Voltage seems to be the same for 
min and max frequency.

Signed-off-by: Rafal Bilski <rafalbilski@interia.pl>
---
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -217,6 +217,15 @@ config X86_LONGHAUL
 
 	  If in doubt, say N.
 
+config X86_E_POWERSAVER
+	tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
+	select CPU_FREQ_TABLE
+	depends on EXPERIMENTAL
+	help
+	  This adds the CPUFreq driver for VIA C7 processors.
+
+	  If in doubt, say N.
+
 comment "shared options"
 
 config X86_ACPI_CPUFREQ_PROC_INTF
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
--- a/arch/i386/kernel/cpu/cpufreq/Makefile
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
 obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
 obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
 obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
+obj-$(CONFIG_X86_E_POWERSAVER)		+= e_powersaver.o
 obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
 obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
 obj-$(CONFIG_X86_LONGRUN)		+= longrun.o  
diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c
new file mode 100644
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c
@@ -0,0 +1,334 @@
+/*
+ *  Based on documentation provided by Dave Jones. Thanks!
+ *  
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/tsc.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#define EPS_BRAND_C7M	0
+#define EPS_BRAND_C7	1
+#define EPS_BRAND_EDEN	2
+#define EPS_BRAND_C3	3
+
+struct eps_cpu_data {
+	u32 fsb;
+	struct cpufreq_frequency_table freq_table[];
+};
+
+static struct eps_cpu_data *eps_cpu[NR_CPUS];
+
+
+static unsigned int eps_get(unsigned int cpu)
+{
+	struct eps_cpu_data *centaur;
+	u32 lo, hi;
+
+	if (cpu)
+		return 0;
+	centaur = eps_cpu[cpu];
+	if (centaur == NULL)
+		return 0;
+
+	/* Return current frequency */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	return centaur->fsb * ((lo >> 8) & 0xff);
+}
+
+static int eps_set_state(struct eps_cpu_data *centaur,
+			 unsigned int cpu,
+			 u32 dest_state)
+{
+	struct cpufreq_freqs freqs;
+	u32 lo, hi;
+	int err = 0;
+	int i;
+
+	freqs.old = eps_get(cpu);
+	freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff);
+	freqs.cpu = cpu;
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Wait while CPU is busy */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	i = 0;
+	while (lo & ((1 << 16) | (1 << 17))) {
+		udelay(16);
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		i++;
+		if (unlikely(i > 64)) {
+			err = -ENODEV;
+			goto postchange;
+		}
+	}
+	/* Set new multiplier and voltage */
+	wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0);
+	/* Wait until transition end */
+	i = 0;
+	do {
+		udelay(16);
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		i++;
+		if (unlikely(i > 64)) {
+			err = -ENODEV;
+			goto postchange;
+		}
+	} while (lo & ((1 << 16) | (1 << 17)));
+
+	/* Return current frequency */
+postchange:
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	return err;
+}
+
+static int eps_target(struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int relation)
+{
+	struct eps_cpu_data *centaur;
+	unsigned int newstate = 0;
+	unsigned int cpu = policy->cpu;
+	unsigned int dest_state;
+	int ret;
+
+	if (unlikely(eps_cpu[cpu] == NULL))
+		return -ENODEV;
+	centaur = eps_cpu[cpu];
+
+	if (unlikely(cpufreq_frequency_table_target(policy,
+			&eps_cpu[cpu]->freq_table[0],
+			target_freq,
+			relation,
+			&newstate))) {
+		return -EINVAL;
+	}
+
+	/* Make frequency transition */
+	dest_state = centaur->freq_table[newstate].index & 0xffff;
+	ret = eps_set_state(centaur, cpu, dest_state);
+	if (ret)
+		printk(KERN_ERR "eps: Timeout!\n");
+	return ret;
+}
+
+static int eps_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy,
+			&eps_cpu[policy->cpu]->freq_table[0]);
+}
+
+static int eps_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	u32 lo, hi;
+	u64 val;
+	u8 current_multiplier, current_voltage;
+	u8 max_multiplier, max_voltage;
+	u8 min_multiplier, min_voltage;
+	u8 brand;
+	u32 fsb;
+	struct eps_cpu_data *centaur;
+	struct cpufreq_frequency_table *f_table;
+	int k, step, voltage;
+	int ret;
+	int states;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* Check brand */
+	printk("eps: Detected VIA ");
+	rdmsr(0x1153, lo, hi);
+	brand = (((lo >> 2) ^ lo) >> 18) & 3;
+	switch(brand) {
+	case EPS_BRAND_C7M:
+		printk("C7-M\n");
+		break;
+	case EPS_BRAND_C7:
+		printk("C7\n");
+		break;
+	case EPS_BRAND_EDEN:
+		printk("Eden\n");
+		break;
+	case EPS_BRAND_C3:
+		printk("C3\n");
+		return -ENODEV;
+		break;
+	}
+	/* Enable Enhanced PowerSaver */
+	rdmsrl(MSR_IA32_MISC_ENABLE, val);
+	if (!(val & 1 << 16)) {
+		val |= 1 << 16;
+		wrmsrl(MSR_IA32_MISC_ENABLE, val);
+		/* Can be locked at 0 */
+		rdmsrl(MSR_IA32_MISC_ENABLE, val);
+		if (!(val & 1 << 16)) {
+			printk("eps: Can't enable Enhanced PowerSaver\n");
+			return -ENODEV;
+		}
+	}
+
+	/* Print voltage and multiplier */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	current_voltage = lo & 0xff;
+	printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700);
+	current_multiplier = (lo >> 8) & 0xff;
+	printk("eps: Current multiplier = %d\n", current_multiplier);
+
+	/* Print limits */
+	max_voltage = hi & 0xff;
+	printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700);
+	max_multiplier = (hi >> 8) & 0xff;
+	printk("eps: Highest multiplier = %d\n", max_multiplier);
+	min_voltage = (hi >> 16) & 0xff;
+	printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700);
+	min_multiplier = (hi >> 24) & 0xff;
+	printk("eps: Lowest multiplier = %d\n", min_multiplier);
+
+	/* Sanity checks */
+	if (current_multiplier == 0 || max_multiplier == 0 
+	    || min_multiplier == 0)
+		return -EINVAL;
+	if (current_multiplier > max_multiplier
+	    || max_multiplier <= min_multiplier)
+		return -EINVAL;
+	if (current_voltage > 0x1c || max_voltage > 0x1c)
+		return -EINVAL;
+	if (max_voltage < min_voltage)
+		return -EINVAL;
+
+	/* Calc FSB speed */
+	fsb = cpu_khz / current_multiplier;
+	/* Calc number of p-states supported */
+	if (brand == EPS_BRAND_C7M)
+		states = max_multiplier - min_multiplier + 1;
+	else
+		states = 2;
+
+	/* Allocate private data and frequency table for current cpu */
+	centaur = kzalloc(sizeof(struct eps_cpu_data) 
+		    + (states + 1) * sizeof(struct cpufreq_frequency_table),
+		    GFP_KERNEL);
+	if (!centaur)
+		return -ENOMEM;
+	eps_cpu[0] = centaur;
+
+	/* Copy basic values */
+	centaur->fsb = fsb;
+
+	/* Fill frequency and MSR value table */
+	f_table = &centaur->freq_table[0];
+	if (brand == EPS_BRAND_EDEN) {
+		f_table[0].frequency = fsb * min_multiplier;
+		f_table[0].index = (min_multiplier << 8) | min_voltage;
+		f_table[1].frequency = fsb * max_multiplier;
+		f_table[1].index = (max_multiplier << 8) | max_voltage;
+		f_table[2].frequency = CPUFREQ_TABLE_END;
+	} else {
+		k = 0;
+		step = ((max_voltage - min_voltage) * 256)
+			/ (max_multiplier - min_multiplier);
+		for (i = min_multiplier; i <= max_multiplier; i++) {
+			voltage = (k * step) / 256 + min_voltage;
+			f_table[k].frequency = fsb * i;
+			f_table[k].index = (i << 8) | voltage;
+			k++;
+		}
+		f_table[k].frequency = CPUFREQ_TABLE_END;
+	}
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */
+	policy->cur = fsb * current_multiplier;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, &centaur->freq_table[0]);
+	if (ret) {
+		kfree(centaur);
+		return ret;
+	}
+
+	cpufreq_frequency_table_get_attr(&centaur->freq_table[0], policy->cpu);
+	return 0;
+}
+
+static int eps_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	struct eps_cpu_data *centaur;
+	u32 lo, hi;
+
+	if (eps_cpu[cpu] == NULL)
+		return -ENODEV;
+	centaur = eps_cpu[cpu];
+
+	/* Get max frequency */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	/* Set max frequency */
+	eps_set_state(centaur, cpu, hi & 0xffff);
+	/* Bye */
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	kfree(eps_cpu[cpu]);
+	eps_cpu[cpu] = NULL;
+	return 0;
+}
+
+static struct freq_attr* eps_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver eps_driver = {
+	.verify		= eps_verify,
+	.target		= eps_target,
+	.init		= eps_cpu_init,
+	.exit		= eps_cpu_exit,
+	.get		= eps_get,
+	.name		= "e_powersaver",
+	.owner		= THIS_MODULE,
+	.attr		= eps_attr,
+};
+
+static int __init eps_init(void)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+
+	/* This driver will work only on Centaur C7 processors with 
+	 * Enhanced SpeedStep/PowerSaver registers */
+	if (c->x86_vendor != X86_VENDOR_CENTAUR
+	    || c->x86 != 6 || c->x86_model != 10)
+		return -ENODEV;
+	if (!cpu_has(c, X86_FEATURE_EST))
+		return -ENODEV;
+
+	if (cpufreq_register_driver(&eps_driver))
+		return -EINVAL;
+	return 0;
+}
+
+static void __exit eps_exit(void)
+{
+	cpufreq_unregister_driver(&eps_driver);
+}
+
+MODULE_AUTHOR("Rafa³ Bilski <rafalbilski@interia.pl>");
+MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
+MODULE_LICENSE("GPL");
+
+module_init(eps_init);
+module_exit(eps_exit);


----------------------------------------------------------------------
Oficjalne konto pocztowe europejskich internautow! 
>>> http://link.interia.pl/f19e8

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2007-02-05 18:57 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-01-11 17:58 [PATCH] Enhanced Powersaver driver Rafał Bilski
  -- strict thread matches above, loose matches on Subject: below --
2007-02-05 18:57 [PATCH] Enhanced PowerSaver driver Rafał Bilski

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.