[Xenomai-help] interrupts test

[Xenomai-help] interrupts test

[mani bhatti]

[-- Attachment #1.1: Type: text/plain, Size: 642 bytes --]

Hi 
I have attached a  kernel module parint.c.When i insert parint.ko  into kernel i get the following message from kernel .

Request_irq returns 0
Interrupt generated. You should see the handler-message
Badness in enable_irq at kernel/irq/manage.c:126
 [<c012da81>] enable_irq+0x68/0xdf
 [<c80be033>] init_module+0x22/0x52 [parint]
 [<c80be000>] handler+0x0/0x11 [parint]
 [<c012c78a>] sys_init_module+0xb5/0x221
 [<c0102898>] syscall_call+0x7/0xb



Please if some one can point out the mistake i would be very helpful.
Thanks.

 
---------------------------------
 Get your own web address.
 Have a HUGE year through Yahoo! Small Business.

[-- Attachment #1.2: Type: text/html, Size: 942 bytes --]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 4109319093-parint.c --]
[-- Type: text/x-csrc; name="parint.c", Size: 864 bytes --]

#include <linux/module.h>
#include <linux/interrupt.h>
#include <asm/io.h>

#define BASEPORT 0x378

static int handler(void)
{
	// do stuff
	printk(">>> PARALLEL PORT INT HANDLED\n");
	return IRQ_HANDLED;
}

int xinit_module(void)
{
	int ret;
	ret = request_irq(7, handler, SA_INTERRUPT, "parallelport", NULL);
	enable_irq(7);
        printk("\nRequest_irq returns %d \n",ret);

	//set port to interrupt mode; pins are output
	outb_p(0x10, BASEPORT + 2); 

//	printk("Generating interrupt now on all output pins (intr/ACK = pin 10)\n");
	
	//generate interrupt
	outb_p(0, BASEPORT);
	outb_p(255, BASEPORT);
	outb_p(0, BASEPORT);
//	printk("Interrupt generated. You should see the handler-message\n");
	return 0;
}

void xcleanup_module(void)
{
	disable_irq(7);
	free_irq(7, NULL);
}

module_init(xinit_module);
module_exit(xcleanup_module);
MODULE_LICENSE("GPL");

[-- Attachment #3: 402397780-Makefile --]
[-- Type: application/octet-stream, Size: 138 bytes --]

obj-m	:= parint.o

KDIR	:= /lib/modules/$(shell uname -r)/build
PWD		:= $(shell pwd)

default:
	$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules

Re: [Xenomai-help] interrupts test

[Jan Kiszka]

[-- Attachment #1: Type: text/plain, Size: 2218 bytes --]

mani bhatti wrote:
> Hi 
> I have attached a  kernel module parint.c.When i insert parint.ko  into kernel i get the following message from kernel .

This is not Xenomai-related.

> 
> Request_irq returns 0
> Interrupt generated. You should see the handler-message
> Badness in enable_irq at kernel/irq/manage.c:126
>  [<c012da81>] enable_irq+0x68/0xdf
>  [<c80be033>] init_module+0x22/0x52 [parint]
>  [<c80be000>] handler+0x0/0x11 [parint]
>  [<c012c78a>] sys_init_module+0xb5/0x221
>  [<c0102898>] syscall_call+0x7/0xb
> 
> 
> 
> Please if some one can point out the mistake i would be very helpful.
> Thanks.
> 
>  
> ---------------------------------
>  Get your own web address.
>  Have a HUGE year through Yahoo! Small Business.
> 
> 
> ------------------------------------------------------------------------
> 
> #include <linux/module.h>
> #include <linux/interrupt.h>
> #include <asm/io.h>
> 
> #define BASEPORT 0x378
> 
> static int handler(void)
> {
> 	// do stuff
> 	printk(">>> PARALLEL PORT INT HANDLED\n");
> 	return IRQ_HANDLED;
> }
> 
> int xinit_module(void)
> {
> 	int ret;
> 	ret = request_irq(7, handler, SA_INTERRUPT, "parallelport", NULL);
> 	enable_irq(7);

I think someone already suggested to study the Linux Device Drivers
book. That one shouldn't state that you need the line above.

>         printk("\nRequest_irq returns %d \n",ret);
> 
> 	//set port to interrupt mode; pins are output
> 	outb_p(0x10, BASEPORT + 2); 
> 
> //	printk("Generating interrupt now on all output pins (intr/ACK = pin 10)\n");
> 	
> 	//generate interrupt
> 	outb_p(0, BASEPORT);
> 	outb_p(255, BASEPORT);
> 	outb_p(0, BASEPORT);
> //	printk("Interrupt generated. You should see the handler-message\n");
> 	return 0;
> }
> 
> void xcleanup_module(void)
> {
> 	disable_irq(7);
> 	free_irq(7, NULL);
> }
> 
> module_init(xinit_module);
> module_exit(xcleanup_module);
> MODULE_LICENSE("GPL");
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]

Re: [Xenomai-help] interrupts test

[Wolfgang Grandegger]

Hello,

you program does not use Xenomai services and is therefore off-topic 
here, nevertheless...

mani bhatti wrote:
> Hi
> I have attached a  kernel module parint.c.When i insert parint.ko  into 
> kernel i get the following message from kernel .
> 
> Request_irq returns 0
> Interrupt generated. You should see the handler-message
> Badness in enable_irq at kernel/irq/manage.c:126
>  [<c012da81>] enable_irq+0x68/0xdf
>  [<c80be033>] init_module+0x22/0x52 [parint]
>  [<c80be000>] handler+0x0/0x11 [parint]
>  [<c012c78a>] sys_init_module+0xb5/0x221
>  [<c0102898>] syscall_call+0x7/0xb
> 
> 
> 
> Please if some one can point out the mistake i would be very helpful.
> Thanks.
> 
> ------------------------------------------------------------------------
> Get your own web address. 
> <http://us.rd.yahoo.com/evt=49678/*http://smallbusiness.yahoo.com/domains/?p=BESTDEAL>
> Have a HUGE year through Yahoo! Small Business. < 
> http://us.rd.yahoo.com/evt=49678/*http://smallbusiness.yahoo.com/domains/?p=BESTDEAL> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> #include <linux/module.h>
> #include <linux/interrupt.h>
> #include <asm/io.h>
> 
> #define BASEPORT 0x378
> 
> static int handler(void)
> {
> 	// do stuff
> 	printk(">>> PARALLEL PORT INT HANDLED\n");
> 	return IRQ_HANDLED;
> }
> 
> int xinit_module(void)
> {
> 	int ret;
> 	ret = request_irq(7, handler, SA_INTERRUPT, "parallelport", NULL);
> 	enable_irq(7);

I think that's the reason for the oops. Remove the unbalanced 
enable_irq() and disable_irq() from you code example. request_irq() and 
disable_irq() already enabled/disable the interrupts.

>         printk("\nRequest_irq returns %d \n",ret);
> 
> 	//set port to interrupt mode; pins are output
> 	outb_p(0x10, BASEPORT + 2); 
> 
> //	printk("Generating interrupt now on all output pins (intr/ACK = pin 10)\n");
> 	
> 	//generate interrupt
> 	outb_p(0, BASEPORT);
> 	outb_p(255, BASEPORT);
> 	outb_p(0, BASEPORT);
> //	printk("Interrupt generated. You should see the handler-message\n");
> 	return 0;
> }
> 
> void xcleanup_module(void)
> {
> 	disable_irq(7);
> 	free_irq(7, NULL);
> }
> 
> module_init(xinit_module);
> module_exit(xcleanup_module);
> MODULE_LICENSE("GPL");

In gerneral, you should use RTDM services in a Xenomai driver module.

Wolfgang.