* [LARTC] Brige + Firewall + Squid problem
@ 2007-02-15 9:36 Darshak
0 siblings, 0 replies; only message in thread
From: Darshak @ 2007-02-15 9:36 UTC (permalink / raw)
To: lartc
Hi, guys
I am new to linux and iptables/ebtables
=============My network is as follows
LAN
IP1 : 10.10.3.25 Web Server
BRIDGE : Bridge + Squid + Firewall Which is between IP1 and IP2 which is
given IP and Defuault Gateways for this
is 192.168.1.1
IP2 : 10.10.3.61 Normal Machine Acting as Clinet
If I enable Squid, I am unable to acces web on IP1.
=============How a packet is passing ?
Client[IP2]->Bridge Layer2,Layer3->Squid
squid->Layer3 =Here It may be checking for Route Of IP1 But It goes
to gateway now gateway doesnt have Route to 10.10.3.61
So its not able to access web.
I am not sure but is this correct? [ Packet Traversal ]
What change do i need to take in bridge so it sends traffic to IP2. And
doesnt need any route.
Thanxs
Darshak Modi
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-02-15 9:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-15 9:36 [LARTC] Brige + Firewall + Squid problem Darshak
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.