From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: bzolnier@gmail.com
Cc: linux-ide@vger.kernel.org
Subject: Re: [PATCH] (pata-2.6 fix queue) cmd64x: fix primary channel address setup time
Date: Wed, 28 Feb 2007 16:27:16 +0300 [thread overview]
Message-ID: <45E58334.4030506@ru.mvista.com> (raw)
In-Reply-To: <200702280049.36593.sshtylyov@ru.mvista.com>
Hello, I wrote:
> The driver used to merge the address setup timing for the secondary channel but
> this must have been done for both channels actually despite the primary channel
> had separate registers for each drive (I'afraid that this is too common mistake
> in both hardware and software -- address setup timing must be the same accross
> an IDE channel). Thus, do a number of changes to the program_drive_counts():
Oops, looks like it was another mind glitch of mine and was fixing a
non-issue -- if I just looked into the spece I would have read there that the
hardware itself handles this for the primary channel (the question is WTF they
didn't do the same for the secondary one?). So, simpley disregard this patch.
I'll send the MWDMA patch soon.
MBR, Sergei
next prev parent reply other threads:[~2007-02-28 13:27 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-03 20:09 [PATCH] (2.6.20-rc7) cmd64x: fix PIO mode setup Sergei Shtylyov
2007-02-03 21:04 ` [PATCH] (2.6.20-rc7) cmd64x: fix PIO mode setup (take 2) Sergei Shtylyov
2007-02-03 22:25 ` Bartlomiej Zolnierkiewicz
2007-02-05 13:29 ` Sergei Shtylyov
2007-02-05 13:57 ` Sergei Shtylyov
[not found] ` <58cb370e0702061459r1b001421gb4592d066793ab46@mail.gmail.com>
2007-02-06 23:44 ` Bartlomiej Zolnierkiewicz
2007-02-07 12:50 ` Sergei Shtylyov
[not found] ` <58cb370e0702061459k4a147891v3686b267d8e3001a@mail.gmail.com>
2007-02-06 23:33 ` Bartlomiej Zolnierkiewicz
2007-02-06 14:45 ` [PATCH] (2.6.20) cmd64x: fix PIO mode setup (take 3) Sergei Shtylyov
2007-02-06 21:11 ` Mikael Pettersson
2007-02-07 0:28 ` Bartlomiej Zolnierkiewicz
[not found] ` <58cb370e0702061500g3047b8ccpca894962491b588a@mail.gmail.com>
2007-02-06 23:48 ` Bartlomiej Zolnierkiewicz
2007-02-09 22:29 ` [PATCH] (pata-2.6 fix queue) cmd64x: fix recovery time calculation Sergei Shtylyov
2007-02-10 0:14 ` Bartlomiej Zolnierkiewicz
2007-02-14 21:42 ` [PATCH] (pata-2.6 fix queue) cmd64x: interrupt status fixes Sergei Shtylyov
2007-02-14 22:35 ` [PATCH] (pata-2.6 fix queue) cmd64x: add/fix enablebits Sergei Shtylyov
2007-02-19 23:09 ` Bartlomiej Zolnierkiewicz
2007-02-20 14:28 ` Sergei Shtylyov
2007-02-23 20:10 ` Bartlomiej Zolnierkiewicz
2007-04-14 19:31 ` [PATCH pata-2.6] cmd64x: add/fix enablebits (take 2) Sergei Shtylyov
2007-04-23 21:54 ` Bartlomiej Zolnierkiewicz
2007-02-15 13:53 ` [PATCH] (pata-2.6 fix queue) cmd64x: interrupt status fixes (resend) Sergei Shtylyov
2007-02-19 23:04 ` Bartlomiej Zolnierkiewicz
2007-04-14 19:17 ` [PATCH pata-2.6] cmd64x: interrupt status fixes (take 2) Sergei Shtylyov
2007-04-23 21:52 ` Bartlomiej Zolnierkiewicz
2007-02-15 19:17 ` [PATCH] (pata-2.6 fix queue) cmd64x: procfs code fixes/cleanups Sergei Shtylyov
2007-02-19 23:10 ` Bartlomiej Zolnierkiewicz
2007-04-14 19:41 ` [PATCH pata-2.6] cmd64x: procfs code fixes/cleanups (take 2) Sergei Shtylyov
2007-04-23 21:58 ` Bartlomiej Zolnierkiewicz
2007-02-16 20:15 ` [PATCH] (pata-2.6 fix queue) cmd64x: Sergei Shtylyov
2007-02-16 20:21 ` [PATCH] (pata-2.6 fix queue) cmd64x: use interrupt status from MRDMODE register Sergei Shtylyov
2007-02-23 20:09 ` Bartlomiej Zolnierkiewicz
2007-04-14 19:53 ` [PATCH pata-2.6] cmd64x: use interrupt status from MRDMODE register (take 2) Sergei Shtylyov
2007-04-23 22:03 ` Bartlomiej Zolnierkiewicz
2007-04-18 19:38 ` [PATCH pata-2.6 fix queue] hpt366: fix kernel oops with HPT302N Sergei Shtylyov
2007-04-20 19:54 ` Bartlomiej Zolnierkiewicz
2007-04-22 18:05 ` [PATCH pata-2.6 fix queue] aec62xx: fix PIO/DMA setup issues Sergei Shtylyov
2007-04-23 22:33 ` Bartlomiej Zolnierkiewicz
2007-05-10 20:01 ` [PATCH pata-2.6 fix queue] cmd64x: init. code cleanup Sergei Shtylyov
2007-05-10 20:04 ` Sergei Shtylyov
2007-05-15 21:16 ` Bartlomiej Zolnierkiewicz
2007-05-11 19:31 ` [PATCH pata-2.6 fix queue] aec62xx: rework init_setup_aec6x80() Sergei Shtylyov
2007-05-15 21:31 ` Bartlomiej Zolnierkiewicz
2007-05-11 21:11 ` [PATCH pata-2.6 fix queue] aec62xx: remove init_dma() method Sergei Shtylyov
2007-05-15 21:40 ` Bartlomiej Zolnierkiewicz
2007-05-11 21:22 ` [PATCH pata-2.6 fix queue] aec62xx: kill speedproc() method wrapper Sergei Shtylyov
2007-05-15 21:43 ` Bartlomiej Zolnierkiewicz
2007-05-16 14:20 ` Sergei Shtylyov
2007-05-23 23:33 ` Bartlomiej Zolnierkiewicz
2007-05-24 13:18 ` Sergei Shtylyov
2007-05-24 16:44 ` [PATCH pata-2.6] aec62xx: remove init_dma() method (take 2) Sergei Shtylyov
2007-05-24 16:46 ` [PATCH pata-2.6] aec62xx: kill speedproc() method wrapper " Sergei Shtylyov
2007-05-28 20:44 ` Bartlomiej Zolnierkiewicz
2007-06-05 15:15 ` Sergei Shtylyov
2007-06-08 12:22 ` Bartlomiej Zolnierkiewicz
2007-06-09 10:05 ` Sergei Shtylyov
2007-11-09 11:07 ` [PATCH] cmd64x: don't clear the other channels interrupt Sergei Shtylyov
2007-11-11 21:52 ` Bartlomiej Zolnierkiewicz
2007-11-13 20:58 ` Bartlomiej Zolnierkiewicz
2007-11-15 19:23 ` Martin Rogge
2007-11-16 13:34 ` Sergei Shtylyov
2007-02-26 20:32 ` [PATCH] (pata-2.6 fix queue) cmd64x: fix recovery time calculation (take 2) Sergei Shtylyov
2007-03-02 20:34 ` Bartlomiej Zolnierkiewicz
2007-03-03 20:17 ` [PATCH pata-2.6 fix queue] cmd64x: fix recovery time calculation (take 3) Sergei Shtylyov
2007-03-15 20:29 ` Bartlomiej Zolnierkiewicz
2007-02-27 21:49 ` [PATCH] (pata-2.6 fix queue) cmd64x: fix primary channel address setup time Sergei Shtylyov
2007-02-28 13:27 ` Sergei Shtylyov [this message]
2007-02-28 20:52 ` [PATCH] (pata-2.6 fix queue) cmd64x: add back MWDMA support Sergei Shtylyov
2007-03-02 22:03 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45E58334.4030506@ru.mvista.com \
--to=sshtylyov@ru.mvista.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.