From: "Mathieu Bérard" <Mathieu.Berard@crans.org>
To: Jeff Garzik <jeff@garzik.org>
Cc: Adrian Bunk <bunk@stusta.de>,
Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-ide@vger.kernel.org,
Michal Jaegermann <michal@ellpspace.math.ualberta.ca>,
Fabio Comolli <fabio.comolli@gmail.com>,
Tejun Heo <htejun@gmail.com>,
Janosch Machowinski <jmachowinski@gmx.de>,
Lukas Hejtmanek <xhejtman@fi.muni.cz>,
Meelis Roos <mroos@linux.ee>,
Olivier Mondoloni <darkcore71@yahoo.fr>,
Thomas Renninger <trenn@suse.de>,
Robert Moore <robert.moore@intel.com>,
lenb@kernel.org, linux-acpi@vger.kernel.org
Subject: Re: [3/6] 2.6.21-rc2: known regressions
Date: Sat, 10 Mar 2007 02:09:21 +0100 [thread overview]
Message-ID: <45F20541.9090208@crans.org> (raw)
In-Reply-To: <45EE9E39.3010800@garzik.org>
Jeff Garzik a écrit :
> Adrian Bunk wrote:
>> Subject : NCQ problem with ahci and Hitachi drive
>> References : http://lkml.org/lkml/2007/3/4/178
>> Submitter : Mathieu Bérard <Mathieu.Berard@crans.org>
>> Status : unknown
>
> according to the last message in that thread, it sounds like ACPI and
> interrupt problems
>
Hi,
after more testing with a 2.6.21-rc3, it appears that after several ata
errors the boot process
somehow continued as normal, after a "NCQ disabled due to excessive
errors" message.
"pci=noacpi" or "noacpi" parameters workarounds the problem "irqpoll"
does nothing.
lspci:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI
Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA
Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M24 [Radeon
Mobility X600]
06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
06:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG
Network Connection (rev 05)
06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394
Host Controller
06:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated
FlashMedia Controller
06:04.4 Generic system peripheral [0805]: Texas Instruments
PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
/proc/interrupts:
CPU0
0: 3242 IO-APIC-edge timer
1: 863 IO-APIC-edge i8042
8: 3 IO-APIC-edge rtc
9: 1 IO-APIC-fasteoi acpi
12: 116 IO-APIC-edge i8042
14: 128 IO-APIC-edge libata
15: 0 IO-APIC-edge libata
16: 1 IO-APIC-fasteoi uhci_hcd:usb4, yenta
17: 0 IO-APIC-fasteoi tifm_7xx1, Intel ICH6
18: 249 IO-APIC-fasteoi eth0
19: 2712 IO-APIC-fasteoi libata, uhci_hcd:usb2, sdhci:slot0,
sdhci:slot1, sdhci:slot2
20: 47 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
21: 3 IO-APIC-fasteoi uhci_hcd:usb3, ohci1394
22: 1 IO-APIC-fasteoi ipw2200
NMI: 0
LOC: 15767
ERR: 0
MIS: 0
/proc/interrupts with pci=noacpi:
CPU0
0: 2886 XT-PIC-XT timer
1: 79 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
8: 3 XT-PIC-XT rtc
9: 1 XT-PIC-XT acpi
10: 1 XT-PIC-XT uhci_hcd:usb4, tifm_7xx1, yenta,
sdhci:slot0, sdhci:slot1, sdhci:slot2, Intel ICH6
11: 3415 XT-PIC-XT eth0, libata, uhci_hcd:usb1,
uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb5, ohci1394, ipw2200
12: 116 XT-PIC-XT i8042
14: 129 XT-PIC-XT libata
15: 0 XT-PIC-XT libata
NMI: 0
LOC: 6594
ERR: 0
MIS: 0
Full 2.6.21-rc3 boot log:
[ 0.000000] Linux version 2.6.21-rc3 (root@manwe) (gcc version 4.1.2
(Ubuntu 4.1.2-0ubuntu4)) #1 PREEMPT Fri Mar 9 01:54:11 CET 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size:
000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size:
0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d2000 size:
0000000000002000 end: 00000000000d4000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size:
0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size:
000000003fde0000 end: 000000003fee0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fee0000 size:
000000000000a000 end: 000000003feea000 type: 3
[ 0.000000] copy_e820_map() start: 000000003feea000 size:
0000000000016000 end: 000000003ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000003ff00000 size:
0000000000100000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size:
0000000010006000 end: 00000000f0006000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000 size:
0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size:
0000000000070000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size:
0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003feea000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feea000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261856
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261856
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F6980, 0014 (r0 TOSCPL)
[ 0.000000] ACPI: RSDT 3FEE276F, 0044 (r1 TOSCPL RSDT 6040000
LTP 0)
[ 0.000000] ACPI: APIC 3FEE9E88, 0068 (r1 INTEL ALVISO 6040000
LOHR 5F)
[ 0.000000] ACPI: FACP 3FEE9EF0, 0074 (r1 TOSCPL ALVISO 6040000
LOHR 32)
[ 0.000000] ACPI: DSDT 3FEE3217, 6C71 (r1 TOSCPL ALVISO 6040000
MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEFAFC0, 0040
[ 0.000000] ACPI: BOOT 3FEE9FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000
LTP 1)
[ 0.000000] ACPI: MCFG 3FEE9F9C, 003C (r1 INTEL ALVISO 6040000
LOHR 5F)
[ 0.000000] ACPI: SSDT 3FEE2FE5, 022E (r1 SataRe SataAhci 1000
INTL 20030224)
[ 0.000000] ACPI: SSDT 3FEE2BAA, 022B (r1 PmRef Cpu0Ist 3000
INTL 20030224)
[ 0.000000] ACPI: SSDT 3FEE29CC, 01DE (r1 PmRef Cpu0Cst 3001
INTL 20030224)
[ 0.000000] ACPI: SSDT 3FEE27B3, 0219 (r1 PmRef CpuPm 3000
INTL 20030224)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 259811
[ 0.000000] Kernel command line: root=/dev/mapper/Base-Root ro single
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c034f000 soft=c034e000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.086 MHz processor.
[ 82.100659] Console: colour VGA+ 80x25
[ 82.104287] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 82.104813] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 82.128315] Memory: 1031112k/1047424k available (1606k kernel code,
15544k reserved, 544k data, 184k init, 129920k highmem)
[ 82.128378] virtual kernel memory layout:
[ 82.128379] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB)
[ 82.128381] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 82.128383] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
[ 82.128385] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 82.128386] .init : 0xc031b000 - 0xc0349000 ( 184 kB)
[ 82.128388] .data : 0xc029183b - 0xc0319bb4 ( 544 kB)
[ 82.128390] .text : 0xc0100000 - 0xc029183b (1606 kB)
[ 82.128741] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 82.188878] Calibrating delay using timer specific routine.. 3460.07
BogoMIPS (lpj=1730037)
[ 82.188995] Security Framework v1.0.0 initialized
[ 82.189054] Mount-cache hash table entries: 512
[ 82.189191] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 82.189271] CPU: L2 cache: 2048K
[ 82.189321] Intel machine check architecture supported.
[ 82.189367] Intel machine check reporting enabled on CPU#0.
[ 82.189422] CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 82.189539] Checking 'hlt' instruction... OK.
[ 82.192970] ACPI: Core revision 20070126
[ 82.193084] ACPI: Table DSDT replaced by host OS
[ 82.193197] ACPI: DSDT 00000000, 6305 (r1 TOSCPL ALVISO 6040000
INTL 20051117)
[ 82.202965] ENABLING IO-APIC IRQs
[ 82.203196] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 82.416878] NET: Registered protocol family 16
[ 82.416994] ACPI: bus type pci registered
[ 82.417047] PCI: Using MMCONFIG
[ 82.417737] Setting up standard PCI resources
[ 82.422950] ACPI: Interpreter enabled
[ 82.422996] ACPI: (supports S0 S3 S4 S5)
[ 82.423228] ACPI: Using IOAPIC for interrupt routing
[ 82.468401] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 82.468914] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 82.468962] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 82.469042] 0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
[ 82.469090] 0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
[ 82.469137] 0000:00:1f.1: trying to change BAR2 from 0000 to 0170
[ 82.469184] 0000:00:1f.1: trying to change BAR3 from 0000 to 0374
[ 82.469927] PCI: Transparent bridge - 0000:00:1e.0
[ 82.470019] PCI: Bus #07 (-#0a) is hidden behind transparent bridge
#06 (-#07) (try 'pci=assign-busses')
[ 82.470074] Please report the result to linux-kernel to fix this
permanently
[ 82.477076] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12
14 15)
[ 82.477633] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 82.478229] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 82.478831] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 82.479384] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 82.479979] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 82.480532] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 82.481129] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 82.481670] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 82.481721] pnp: PnP ACPI init
[ 82.503859] pnp: PnP ACPI: found 9 devices
[ 82.503925] PCI: Using ACPI for IRQ routing
[ 82.503970] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 82.504135] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved
[ 82.504182] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved
[ 82.504229] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved
[ 82.504277] pnp: 00:01: iomem range 0xe0000000-0xefffffff has been
reserved
[ 82.504324] pnp: 00:01: iomem range 0xf0000000-0xf0003fff has been
reserved
[ 82.504372] pnp: 00:01: iomem range 0xf0004000-0xf0004fff has been
reserved
[ 82.504420] pnp: 00:01: iomem range 0xf0005000-0xf0005fff has been
reserved
[ 82.504712] Time: tsc clocksource has been installed.
[ 82.534686] PCI: Bridge: 0000:00:01.0
[ 82.534732] IO window: 3000-3fff
[ 82.534777] MEM window: b8100000-b81fffff
[ 82.534822] PREFETCH window: c8000000-cfffffff
[ 82.534868] PCI: Bridge: 0000:00:1c.0
[ 82.534913] IO window: 4000-4fff
[ 82.534959] MEM window: bc000000-bfffffff
[ 82.535006] PREFETCH window: d0000000-d3ffffff
[ 82.535053] PCI: Bridge: 0000:00:1c.1
[ 82.535098] IO window: 5000-5fff
[ 82.535144] MEM window: c0000000-c3ffffff
[ 82.535191] PREFETCH window: d4000000-d7ffffff
[ 82.535241] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 82.535287] IO window: 00006400-000064ff
[ 82.535334] IO window: 00006800-000068ff
[ 82.535381] PREFETCH window: 50000000-53ffffff
[ 82.535428] MEM window: 54000000-57ffffff
[ 82.535475] PCI: Bridge: 0000:00:1e.0
[ 82.535520] IO window: 6000-6fff
[ 82.535567] MEM window: c4000000-c40fffff
[ 82.535614] PREFETCH window: 50000000-53ffffff
[ 82.535668] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 82.536458] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 82.536562] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level,
low) -> IRQ 16
[ 82.536674] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 82.536778] NET: Registered protocol family 2
[ 82.546708] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 82.546828] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 82.547737] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 82.548053] TCP: Hash tables configured (established 131072 bind 65536)
[ 82.548103] TCP reno registered
[ 82.550814] checking if image is initramfs... it is
[ 82.926145] Freeing initrd memory: 3943k freed
[ 82.926322] Simple Boot Flag at 0x36 set to 0x1
[ 82.926670] highmem bounce pool size: 64 pages
[ 82.926717] Total HugeTLB memory allocated, 0
[ 82.926848] io scheduler noop registered
[ 82.926934] io scheduler cfq registered (default)
[ 82.927311] assign_interrupt_mode Found MSI capability
[ 82.927524] assign_interrupt_mode Found MSI capability
[ 82.927748] assign_interrupt_mode Found MSI capability
[ 82.929989] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 82.930197] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 82.930435] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 82.930548] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 82.930624] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 82.930694] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 82.930762] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 82.930830] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 82.930924] mice: PS/2 mouse device common for all mice
[ 82.931061] TCP cubic registered
[ 82.931110] NET: Registered protocol family 1
[ 82.931162] Using IPI Shortcut mode
[ 82.931366] Freeing unused kernel memory: 184k freed
[ 82.933520] input: AT Translated Set 2 keyboard as /class/input/input0
[ 83.034411] Switched to high resolution mode on CPU 0
[ 83.038869] 8139too Fast Ethernet driver 0.9.28
[ 83.038971] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level,
low) -> IRQ 18
[ 83.039529] eth0: RealTek RTL8139 at 0xf8820000, 00:0f:b0:a5:9a:81,
IRQ 18
[ 83.041859] netconsole: local port 5000
[ 83.041905] netconsole: local IP 192.168.0.20
[ 83.041950] netconsole: interface eth0
[ 83.041994] netconsole: remote port 5000
[ 83.042039] netconsole: remote IP 192.168.0.1
[ 83.042084] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 83.042131] netconsole: device eth0 not up yet, forcing it
[ 83.042210] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 83.042967] netconsole: carrier detect appears untrustworthy, waiting
4 seconds
[ 87.059120] netconsole: network logging started
[ 87.064954] SCSI subsystem initialized
[ 87.070057] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level,
low) -> IRQ 19
[ 88.070489] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5
Gbps 0x5 impl IDE mode
[ 88.070546] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 88.070671] ata1: SATA max UDMA/133 cmd 0xf8824d00 ctl 0x00000000
bmdma 0x00000000 irq 19
[ 88.070789] ata2: SATA max UDMA/133 cmd 0xf8824d80 ctl 0x00000000
bmdma 0x00000000 irq 19
[ 88.070910] ata3: SATA max UDMA/133 cmd 0xf8824e00 ctl 0x00000000
bmdma 0x00000000 irq 19
[ 88.071027] ata4: SATA max UDMA/133 cmd 0xf8824e80 ctl 0x00000000
bmdma 0x00000000 irq 19
[ 88.071091] scsi0 : ahci
[ 88.528373] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 88.573162] ata1.00: ATA-7: HTS541010G9SA00, MBZOC60D, max UDMA/100
[ 88.573212] ata1.00: 195371568 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 88.575453] ata1.00: configured for UDMA/100
[ 88.575503] scsi1 : ahci
[ 88.878284] ata2: SATA link down (SStatus 0 SControl 0)
[ 88.878338] scsi2 : ahci
[ 89.181217] ata3: SATA link down (SStatus 0 SControl 300)
[ 89.181270] scsi3 : ahci
[ 89.484151] ata4: SATA link down (SStatus 0 SControl 0)
[ 89.484277] scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00
MBZO PQ: 0 ANSI: 5
[ 89.488409] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12)
initialised: dm-devel@redhat.com
[ 89.601570] usbcore: registered new interface driver usbfs
[ 89.601649] usbcore: registered new interface driver hub
[ 89.601716] usbcore: registered new device driver usb
[ 89.602398] USB Universal Host Controller Interface driver v3.0
[ 89.602495] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level,
low) -> IRQ 20
[ 89.602607] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 89.602735] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 89.602821] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 89.602958] usb usb1: configuration #1 chosen from 1 choice
[ 89.603026] hub 1-0:1.0: USB hub found
[ 89.603077] hub 1-0:1.0: 2 ports detected
[ 89.705230] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
low) -> IRQ 19
[ 89.705354] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 89.705423] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 89.705506] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 89.705633] usb usb2: configuration #1 chosen from 1 choice
[ 89.705702] hub 2-0:1.0: USB hub found
[ 89.705752] hub 2-0:1.0: 2 ports detected
[ 89.806175] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 21
[ 89.806300] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 89.806370] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 89.806455] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840
[ 89.806582] usb usb3: configuration #1 chosen from 1 choice
[ 89.806652] hub 3-0:1.0: USB hub found
[ 89.806703] hub 3-0:1.0: 2 ports detected
[ 89.907109] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level,
low) -> IRQ 16
[ 89.907217] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 89.907288] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 89.907370] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 89.907488] usb usb4: configuration #1 chosen from 1 choice
[ 89.907556] hub 4-0:1.0: USB hub found
[ 89.907606] hub 4-0:1.0: 2 ports detected
[ 89.911054] usb 1-1: new low speed USB device using uhci_hcd and
address 2
[ 90.008647] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level,
low) -> IRQ 20
[ 90.008762] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 90.008827] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 90.008912] ehci_hcd 0000:00:1d.7: debug port 1
[ 90.008969] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xb8000000
[ 90.012903] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 90.013011] usb usb5: configuration #1 chosen from 1 choice
[ 90.013084] hub 5-0:1.0: USB hub found
[ 90.013135] hub 5-0:1.0: 8 ports detected
[ 90.114194] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
low) -> IRQ 21
[ 90.114347] ata5: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6
bmdma 0x000118c0 irq 14
[ 90.114430] ata6: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376
bmdma 0x000118c8 irq 15
[ 90.114511] scsi4 : ata_piix
[ 90.419698] ata5.00: ATAPI, max UDMA/33
[ 90.426941] usb 1-1: device not accepting address 2, error -71
[ 90.574569] ata5.00: configured for UDMA/33
[ 90.574624] scsi5 : ata_piix
[ 90.574727] ata6: port disabled. ignoring.
[ 90.576634] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S
1.50 PQ: 0 ANSI: 5
[ 90.576836] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level,
low) -> IRQ 21
[ 90.627288] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]
MMIO=[c4006800-c4006fff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 90.636552] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 90.636620] sda: Write Protect is off
[ 90.636689] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 90.636787] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 90.636842] sda: Write Protect is off
[ 90.636913] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 90.636970] sda:<6>usb 1-1: new low speed USB device using uhci_hcd
and address 4
[ 91.072397] usb 1-1: configuration #1 chosen from 1 choice
[ 91.098889] input: Logitech USB Receiver as /class/input/input1
[ 91.099036] input: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:1d.0-1
[ 91.099185] usbcore: registered new interface driver usbhid
[ 91.099239] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 120.630313] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2
frozen
[ 120.630373] ata1.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
cdb 0x0 data 4096 in
[ 120.630375] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 120.933235] ata1: soft resetting port
[ 121.088217] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 121.093545] ata1.00: configured for UDMA/100
[ 121.093600] ata1: EH complete
[ 121.093682] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 121.093739] sda: Write Protect is off
[ 121.093805] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 151.086611] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2
frozen
[ 151.086665] ata1.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
cdb 0x0 data 4096 in
[ 151.086667] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 151.389541] ata1: soft resetting port
[ 151.544521] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 151.549801] ata1.00: configured for UDMA/100
[ 151.549852] ata1: EH complete
[ 151.549921] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 151.549976] sda: Write Protect is off
[ 151.550042] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 181.542915] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2
frozen
[ 181.542970] ata1.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
cdb 0x0 data 4096 in
[ 181.542971] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 181.845846] ata1: soft resetting port
[ 182.000827] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 182.006151] ata1.00: configured for UDMA/100
[ 182.006202] ata1: EH complete
[ 182.006271] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 182.006325] sda: Write Protect is off
[ 182.006391] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 211.999220] ata1.00: NCQ disabled due to excessive errors
[ 211.999271] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2
frozen
[ 211.999329] ata1.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
cdb 0x0 data 4096 in
[ 211.999331] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 212.302152] ata1: soft resetting port
[ 212.457132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 212.462428] ata1.00: configured for UDMA/100
[ 212.462479] ata1: EH complete
[ 212.462547] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 212.462602] sda: Write Protect is off
[ 212.462668] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 212.477303] sda1 sda2 < sda5 sda6 > sda3
[ 212.521233] sd 0:0:0:0: Attached scsi disk sda
[ 212.524556] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 212.524782] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 212.530683] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 212.530745] Uniform CD-ROM driver Revision: 3.20
[ 212.855075] Attempting manual resume
[ 212.923490] SGI XFS with ACLs, realtime, no debug enabled
[ 212.982545] Filesystem "dm-0": Disabling barriers, not supported by
the underlying device
[ 212.982815] XFS mounting filesystem dm-0
[ 216.458088] input: PC Speaker as /class/input/input2
[ 216.869753] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 216.874226] input: PS/2 Mouse as /class/input/input3
[ 216.891684] Real Time Clock Driver v1.12ac
[ 216.893113] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
[ 216.896321] iTCO_wdt: Found a ICH6-M TCO device (Version=2,
TCOBASE=0x1060)
[ 216.896402] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 217.001241] Linux agpgart interface v0.102 (c) Dave Jones
[ 217.007834] agpgart: Detected an Intel 915GM Chipset.
[ 217.024646] agpgart: AGP aperture is 256M @ 0x0
[ 217.044332] ACPI: PCI Interrupt 0000:06:04.3[B] -> GSI 17 (level,
low) -> IRQ 17
[ 217.058492] sdhci: Secure Digital Host Controller Interface driver
[ 217.058545] sdhci: Copyright(c) Pierre Ossman
[ 217.058620] sdhci: SDHCI controller found at 0000:06:04.4 [104c:8034]
(rev 0)
[ 217.058684] ACPI: PCI Interrupt 0000:06:04.4[D] -> GSI 19 (level,
low) -> IRQ 19
[ 217.058832] mmc0: SDHCI at 0xc4009400 irq 19 DMA
[ 217.058910] mmc1: SDHCI at 0xc4009000 irq 19 DMA
[ 217.058988] mmc2: SDHCI at 0xc4006400 irq 19 DMA
[ 217.590753] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 217.590810] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno@linux.intel.com>
[ 217.622453] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,
1.2.0kmprq
[ 217.622511] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 217.622637] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level,
low) -> IRQ 22
[ 217.622770] ipw2200: Detected Intel PRO/Wireless 2200BG Network
Connection
[ 218.194017] ipw2200: Radio Frequency Kill Switch is On:
[ 218.194020] Kill switch must be turned off for wireless networking to
work.
[ 218.194193] ipw2200: Detected geography ZZM (11 802.11bg channels, 0
802.11a channels)
[ 218.194287] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00]
[ 218.194356] Yenta: Enabling burst memory read transactions
[ 218.194407] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 218.194460] Yenta: Routing CardBus interrupts to PCI
[ 218.194515] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x66
[ 218.417563] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 218.417622] Socket status: 30000006
[ 218.417675] Yenta: Raising subordinate bus# of parent bus (#06) from
#07 to #0a
[ 218.417739] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 218.417794] pcmcia: parent PCI bridge Memory window: 0xc4000000 -
0xc40fffff
[ 218.417850] pcmcia: parent PCI bridge Memory window: 0x50000000 -
0x53ffffff
[ 218.419219] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level,
low) -> IRQ 17
[ 219.231630] intel8x0_measure_ac97_clock: measured 50495 usecs
[ 219.231686] intel8x0: clocking to 48000
[ 219.357519] Capability LSM initialized
[ 219.432905] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 219.468590] Time: acpi_pm clocksource has been installed.
[ 219.481281] Non-volatile memory driver v1.2
[ 219.493925] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 219.530293] IA-32 Microcode Update Driver: v1.14a
<tigran@aivazian.fsnet.co.uk>
[ 219.542486] Machine check exception polling timer started.
[ 219.592529] fuse init (API version 7.8)
Full 2.6.21-rc3 boot log with pci=noacpi:
[ 0.000000] Linux version 2.6.21-rc3 (root@manwe) (gcc version 4.1.2
(Ubuntu 4.1.2-0ubuntu4)) #1 PREEMPT Fri Mar 9 01:54:11 CET 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size:
000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size:
0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d2000 size:
0000000000002000 end: 00000000000d4000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size:
0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size:
000000003fde0000 end: 000000003fee0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fee0000 size:
000000000000a000 end: 000000003feea000 type: 3
[ 0.000000] copy_e820_map() start: 000000003feea000 size:
0000000000016000 end: 000000003ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000003ff00000 size:
0000000000100000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size:
0000000010006000 end: 00000000f0006000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000 size:
0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size:
0000000000070000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size:
0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003feea000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feea000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261856
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261856
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F6980, 0014 (r0 TOSCPL)
[ 0.000000] ACPI: RSDT 3FEE276F, 0044 (r1 TOSCPL RSDT 6040000
LTP 0)
[ 0.000000] ACPI: APIC 3FEE9E88, 0068 (r1 INTEL ALVISO 6040000
LOHR 5F)
[ 0.000000] ACPI: FACP 3FEE9EF0, 0074 (r1 TOSCPL ALVISO 6040000
LOHR 32)
[ 0.000000] ACPI: DSDT 3FEE3217, 6C71 (r1 TOSCPL ALVISO 6040000
MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEFAFC0, 0040
[ 0.000000] ACPI: BOOT 3FEE9FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000
LTP 1)
[ 0.000000] ACPI: MCFG 3FEE9F9C, 003C (r1 INTEL ALVISO 6040000
LOHR 5F)
[ 0.000000] ACPI: SSDT 3FEE2FE5, 022E (r1 SataRe SataAhci 1000
INTL 20030224)
[ 0.000000] ACPI: SSDT 3FEE2BAA, 022B (r1 PmRef Cpu0Ist 3000
INTL 20030224)
[ 0.000000] ACPI: SSDT 3FEE29CC, 01DE (r1 PmRef Cpu0Cst 3001
INTL 20030224)
[ 0.000000] ACPI: SSDT 3FEE27B3, 0219 (r1 PmRef CpuPm 3000
INTL 20030224)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 259811
[ 0.000000] Kernel command line: root=/dev/mapper/Base-Root ro single
pci=noacpi
[ 0.000000] Found and enabled local APIC!
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c034f000 soft=c034e000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.052 MHz processor.
[ 28.094814] Console: colour VGA+ 80x25
[ 28.098208] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 28.098736] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 28.122214] Memory: 1031112k/1047424k available (1606k kernel code,
15544k reserved, 544k data, 184k init, 129920k highmem)
[ 28.122277] virtual kernel memory layout:
[ 28.122279] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB)
[ 28.122281] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 28.122282] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
[ 28.122284] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 28.122286] .init : 0xc031b000 - 0xc0349000 ( 184 kB)
[ 28.122287] .data : 0xc029183b - 0xc0319bb4 ( 544 kB)
[ 28.122289] .text : 0xc0100000 - 0xc029183b (1606 kB)
[ 28.122640] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 28.182778] Calibrating delay using timer specific routine.. 3460.10
BogoMIPS (lpj=1730052)
[ 28.182893] Security Framework v1.0.0 initialized
[ 28.182952] Mount-cache hash table entries: 512
[ 28.183089] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 28.183169] CPU: L2 cache: 2048K
[ 28.183217] Intel machine check architecture supported.
[ 28.183264] Intel machine check reporting enabled on CPU#0.
[ 28.183318] CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 28.183435] Checking 'hlt' instruction... OK.
[ 28.186871] ACPI: Core revision 20070126
[ 28.186986] ACPI: Table DSDT replaced by host OS
[ 28.187101] ACPI: DSDT 00000000, 6305 (r1 TOSCPL ALVISO 6040000
INTL 20051117)
[ 28.189974] ACPI: setting ELCR to 0e00 (from 0c00)
[ 28.400789] NET: Registered protocol family 16
[ 28.400904] ACPI: bus type pci registered
[ 28.400957] PCI: Using MMCONFIG
[ 28.401645] Setting up standard PCI resources
[ 28.406853] ACPI: Interpreter enabled
[ 28.406900] ACPI: (supports S0 S3 S4 S5)
[ 28.407132] ACPI: Using PIC for interrupt routing
[ 28.452326] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 28.452378] pnp: PnP ACPI init
[ 28.474767] pnp: PnP ACPI: found 9 devices
[ 28.474837] PCI: Probing PCI hardware
[ 28.475352] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 28.475400] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 28.475480] 0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
[ 28.475527] 0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
[ 28.475574] 0000:00:1f.1: trying to change BAR2 from 0000 to 0170
[ 28.475621] 0000:00:1f.1: trying to change BAR3 from 0000 to 0374
[ 28.476362] PCI: Transparent bridge - 0000:00:1e.0
[ 28.476455] PCI: Bus #07 (-#0a) is hidden behind transparent bridge
#06 (-#07) (try 'pci=assign-busses')
[ 28.476509] Please report the result to linux-kernel to fix this
permanently
[ 28.477400] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved
[ 28.477448] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved
[ 28.477496] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved
[ 28.477543] pnp: 00:01: iomem range 0xe0000000-0xefffffff has been
reserved
[ 28.477591] pnp: 00:01: iomem range 0xf0000000-0xf0003fff has been
reserved
[ 28.477638] Time: tsc clocksource has been installed.
[ 28.477687] pnp: 00:01: iomem range 0xf0004000-0xf0004fff has been
reserved
[ 28.477735] pnp: 00:01: iomem range 0xf0005000-0xf0005fff has been
reserved
[ 28.508000] PCI: Bridge: 0000:00:01.0
[ 28.508045] IO window: 3000-3fff
[ 28.508090] MEM window: b8100000-b81fffff
[ 28.508135] PREFETCH window: c8000000-cfffffff
[ 28.508181] PCI: Bridge: 0000:00:1c.0
[ 28.508226] IO window: 4000-4fff
[ 28.508273] MEM window: bc000000-bfffffff
[ 28.508319] PREFETCH window: d0000000-d3ffffff
[ 28.508367] PCI: Bridge: 0000:00:1c.1
[ 28.508412] IO window: 5000-5fff
[ 28.508458] MEM window: c0000000-c3ffffff
[ 28.508504] PREFETCH window: d4000000-d7ffffff
[ 28.508555] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 28.508600] IO window: 00006400-000064ff
[ 28.508648] IO window: 00006800-000068ff
[ 28.508695] PREFETCH window: 50000000-53ffffff
[ 28.508742] MEM window: 54000000-57ffffff
[ 28.508789] PCI: Bridge: 0000:00:1e.0
[ 28.508834] IO window: 6000-6fff
[ 28.508881] MEM window: c4000000-c40fffff
[ 28.508927] PREFETCH window: 50000000-53ffffff
[ 28.509056] NET: Registered protocol family 2
[ 28.517623] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 28.517744] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 28.518638] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 28.518950] TCP: Hash tables configured (established 131072 bind 65536)
[ 28.518999] TCP reno registered
[ 28.521728] checking if image is initramfs... it is
[ 28.897082] Freeing initrd memory: 3943k freed
[ 28.897258] Simple Boot Flag at 0x36 set to 0x1
[ 28.897591] highmem bounce pool size: 64 pages
[ 28.897638] Total HugeTLB memory allocated, 0
[ 28.897770] io scheduler noop registered
[ 28.897855] io scheduler cfq registered (default)
[ 28.898234] assign_interrupt_mode Found MSI capability
[ 28.898443] assign_interrupt_mode Found MSI capability
[ 28.898670] assign_interrupt_mode Found MSI capability
[ 28.900923] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 28.901109] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 28.902057] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 28.902162] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.902241] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 28.902314] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 28.902401] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 28.902470] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 28.902560] mice: PS/2 mouse device common for all mice
[ 28.902702] TCP cubic registered
[ 28.902750] NET: Registered protocol family 1
[ 28.902803] Using IPI Shortcut mode
[ 28.903006] Freeing unused kernel memory: 184k freed
[ 28.905169] input: AT Translated Set 2 keyboard as /class/input/input0
[ 29.008326] Switched to high resolution mode on CPU 0
[ 29.010655] 8139too Fast Ethernet driver 0.9.28
[ 29.011221] eth0: RealTek RTL8139 at 0xf8820000, 00:0f:b0:a5:9a:81,
IRQ 11
[ 29.013527] netconsole: local port 5000
[ 29.013573] netconsole: local IP 192.168.0.20
[ 29.013618] netconsole: interface eth0
[ 29.013663] netconsole: remote port 5000
[ 29.013708] netconsole: remote IP 192.168.0.1
[ 29.013753] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 29.013801] netconsole: device eth0 not up yet, forcing it
[ 29.013879] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 29.014630] netconsole: carrier detect appears untrustworthy, waiting
4 seconds
[ 33.029671] netconsole: network logging started
[ 33.035522] SCSI subsystem initialized
[ 34.041305] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5
Gbps 0x5 impl IDE mode
[ 34.041363] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 34.041503] ata1: SATA max UDMA/133 cmd 0xf8824d00 ctl 0x00000000
bmdma 0x00000000 irq 11
[ 34.041628] ata2: SATA max UDMA/133 cmd 0xf8824d80 ctl 0x00000000
bmdma 0x00000000 irq 11
[ 34.041754] ata3: SATA max UDMA/133 cmd 0xf8824e00 ctl 0x00000000
bmdma 0x00000000 irq 11
[ 34.041881] ata4: SATA max UDMA/133 cmd 0xf8824e80 ctl 0x00000000
bmdma 0x00000000 irq 11
[ 34.041942] scsi0 : ahci
[ 34.499179] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.500247] ata1.00: ATA-7: HTS541010G9SA00, MBZOC60D, max UDMA/100
[ 34.500297] ata1.00: 195371568 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 34.501605] ata1.00: configured for UDMA/100
[ 34.501655] scsi1 : ahci
[ 34.804094] ata2: SATA link down (SStatus 0 SControl 0)
[ 34.804147] scsi2 : ahci
[ 35.107022] ata3: SATA link down (SStatus 0 SControl 300)
[ 35.107075] scsi3 : ahci
[ 35.409949] ata4: SATA link down (SStatus 0 SControl 0)
[ 35.410086] scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00
MBZO PQ: 0 ANSI: 5
[ 35.414197] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12)
initialised: dm-devel@redhat.com
[ 35.525666] usbcore: registered new interface driver usbfs
[ 35.525759] usbcore: registered new interface driver hub
[ 35.525834] usbcore: registered new device driver usb
[ 35.526522] USB Universal Host Controller Interface driver v3.0
[ 35.526634] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 35.526769] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 35.526860] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 35.527012] usb usb1: configuration #1 chosen from 1 choice
[ 35.527090] hub 1-0:1.0: USB hub found
[ 35.527140] hub 1-0:1.0: 2 ports detected
[ 35.628035] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 35.628131] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 35.628224] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 35.628362] usb usb2: configuration #1 chosen from 1 choice
[ 35.628442] hub 2-0:1.0: USB hub found
[ 35.628492] hub 2-0:1.0: 2 ports detected
[ 35.728979] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 35.729070] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 35.729164] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 35.729308] usb usb3: configuration #1 chosen from 1 choice
[ 35.729391] hub 3-0:1.0: USB hub found
[ 35.729442] hub 3-0:1.0: 2 ports detected
[ 35.829912] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 35.829972] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 35.830083] uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
[ 35.830216] usb usb4: configuration #1 chosen from 1 choice
[ 35.830297] hub 4-0:1.0: USB hub found
[ 35.830347] hub 4-0:1.0: 2 ports detected
[ 35.833845] usb 1-1: new low speed USB device using uhci_hcd and
address 2
[ 35.931272] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 35.931352] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 35.931449] ehci_hcd 0000:00:1d.7: debug port 1
[ 35.931505] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb8000000
[ 35.935482] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 35.935607] usb usb5: configuration #1 chosen from 1 choice
[ 35.935689] hub 5-0:1.0: USB hub found
[ 35.935740] hub 5-0:1.0: 8 ports detected
[ 36.092619] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]
MMIO=[c4006800-c4006fff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 36.092998] ata5: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6
bmdma 0x000118c0 irq 14
[ 36.093093] ata6: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376
bmdma 0x000118c8 irq 15
[ 36.093188] scsi4 : ata_piix
[ 36.350721] usb 1-1: device not accepting address 2, error -71
[ 36.398196] ata5.00: ATAPI, max UDMA/33
[ 36.553176] ata5.00: configured for UDMA/33
[ 36.553230] scsi5 : ata_piix
[ 36.553348] ata6: port disabled. ignoring.
[ 36.555292] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S
1.50 PQ: 0 ANSI: 5
[ 36.564056] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 36.564122] sda: Write Protect is off
[ 36.564221] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 36.564332] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 36.564386] sda: Write Protect is off
[ 36.564478] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 36.564535] sda:<6>usb 1-1: new low speed USB device using uhci_hcd
and address 4
[ 36.995244] sda1 sda2 <<6>usb 1-1: configuration #1 chosen from 1 choice
[ 37.009405] sda5 sda6 > sda3
[ 37.016674] sd 0:0:0:0: Attached scsi disk sda
[ 37.019316] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 37.019376] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 37.024809] input: Logitech USB Receiver as /class/input/input1
[ 37.025012] input: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:1d.0-1
[ 37.025333] usbcore: registered new interface driver usbhid
[ 37.025382] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 37.026312] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 37.026370] Uniform CD-ROM driver Revision: 3.20
[ 37.362728] Attempting manual resume
[ 37.419339] SGI XFS with ACLs, realtime, no debug enabled
[ 37.472334] Filesystem "dm-0": Disabling barriers, not supported by
the underlying device
[ 37.472746] XFS mounting filesystem dm-0
[ 37.662579] Starting XFS recovery on filesystem: dm-0 (logdev: internal)
[ 38.461059] Ending XFS recovery on filesystem: dm-0 (logdev: internal)
[ 41.585513] Linux agpgart interface v0.102 (c) Dave Jones
[ 41.724841] agpgart: Detected an Intel 915GM Chipset.
[ 41.741921] agpgart: AGP aperture is 256M @ 0x0
[ 41.757296] input: PS/2 Mouse as /class/input/input2
[ 41.776092] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[ 41.804732] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 41.804867] iTCO_wdt: Found a ICH6-M TCO device (Version=2,
TCOBASE=0x1060)
[ 41.804960] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 41.851929] Real Time Clock Driver v1.12ac
[ 41.879265] input: PC Speaker as /class/input/input4
[ 42.130778] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 42.130835] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno@linux.intel.com>
[ 42.140470] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,
1.2.0kmprq
[ 42.140528] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 42.140732] ipw2200: Detected Intel PRO/Wireless 2200BG Network
Connection
[ 42.195824] sdhci: Secure Digital Host Controller Interface driver
[ 42.195881] sdhci: Copyright(c) Pierre Ossman
[ 43.540318] ipw2200: Radio Frequency Kill Switch is On:
[ 43.540320] Kill switch must be turned off for wireless networking to
work.
[ 43.540528] ipw2200: Detected geography ZZM (11 802.11bg channels, 0
802.11a channels)
[ 43.540731] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00]
[ 43.540817] Yenta: Enabling burst memory read transactions
[ 43.540869] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 43.540957] Yenta: Routing CardBus interrupts to PCI
[ 43.541011] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x66
[ 43.764493] Yenta: ISA IRQ mask 0x00f8, PCI irq 10
[ 43.764551] Socket status: 30000006
[ 43.764641] Yenta: Raising subordinate bus# of parent bus (#06) from
#07 to #0a
[ 43.764699] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 43.764789] pcmcia: parent PCI bridge Memory window: 0xc4000000 -
0xc40fffff
[ 43.764839] pcmcia: parent PCI bridge Memory window: 0x50000000 -
0x53ffffff
[ 43.766222] sdhci: SDHCI controller found at 0000:06:04.4 [104c:8034]
(rev 0)
[ 43.766360] mmc0: SDHCI at 0xc4009400 irq 10 DMA
[ 43.766457] mmc1: SDHCI at 0xc4009000 irq 10 DMA
[ 43.766552] mmc2: SDHCI at 0xc4006400 irq 10 DMA
[ 44.580756] intel8x0_measure_ac97_clock: measured 50508 usecs
[ 44.580812] intel8x0: clocking to 48000
[ 44.704886] Capability LSM initialized
[ 44.780120] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 44.801715] Time: acpi_pm clocksource has been installed.
[ 44.828491] Non-volatile memory driver v1.2
[ 44.841139] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 44.877491] IA-32 Microcode Update Driver: v1.14a
<tigran@aivazian.fsnet.co.uk>
[ 44.889690] Machine check exception polling timer started.
[ 44.939740] fuse init (API version 7.8)
[ 67.168309] Restarting system.
Thanks
--
Mathieu
next prev parent reply other threads:[~2007-03-10 1:09 UTC|newest]
Thread overview: 225+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-28 5:16 Linux 2.6.21-rc2 Linus Torvalds
2007-02-28 5:50 ` Gabriel C
2007-02-28 7:13 ` [PATCH] affinity is not defined in non-smp kernels - i386 Fernando Luis Vázquez Cao
2007-02-28 7:16 ` [PATCH] affinity is not defined in non-smp kernels - i386 (v2) Fernando Luis Vázquez Cao
2007-02-28 7:24 ` [PATCH] affinity is not defined in non-smp kernels - i386 Eric W. Biederman
2007-02-28 17:31 ` Bill Davidsen
2007-02-28 18:21 ` Eric W. Biederman
2007-02-28 18:30 ` Linus Torvalds
2007-02-28 7:42 ` [PATCH] affinity is not defined in non-smp kernels - i386 (v2) Fernando Luis Vázquez Cao
2007-02-28 7:17 ` [PATCH] affinity is not defined in non-smp kernels - x86_64 Fernando Luis Vázquez Cao
2007-02-28 7:23 ` Linux 2.6.21-rc2 David Brown
2007-02-28 7:39 ` Brice Goglin
2007-02-28 13:09 ` Eric W. Biederman
2007-02-28 16:44 ` David Brown
2007-02-28 17:07 ` Randy Dunlap
2007-02-28 7:41 ` [PATCH] affinity is not defined in non-smp kernels - x86_64 Fernando Luis Vázquez Cao
2007-02-28 7:59 ` Linux 2.6.21-rc2 Damien Wyart
2007-03-05 1:50 ` [1/6] 2.6.21-rc2: known regressions Adrian Bunk
2007-03-05 1:50 ` Adrian Bunk
2007-03-05 2:26 ` Andrew Morton
2007-03-05 2:26 ` Andrew Morton
2007-03-05 3:35 ` Greg KH
2007-03-06 0:55 ` Johannes Berg
2007-03-06 0:55 ` Johannes Berg
2007-03-05 4:01 ` Mark Lord
2007-03-05 4:01 ` Mark Lord
2007-03-05 4:34 ` Greg KH
2007-03-05 12:42 ` Marcel Holtmann
2007-03-05 12:42 ` Marcel Holtmann
2007-03-05 4:34 ` [BUG} usb regression in 2.6.21-rc2-git3 Mark Lord
2007-03-05 4:37 ` [BUG] sdhci regression in 2.6.21-rc2 Mark Lord
2007-03-05 5:36 ` Pierre Ossman
2007-03-05 14:25 ` Mark Lord
2007-03-05 15:19 ` Mark Lord
2007-03-06 4:17 ` Andrew Morton
2007-03-06 5:47 ` Pierre Ossman
2007-03-06 6:09 ` Andrew Morton
2007-03-06 7:23 ` Pierre Ossman
2007-03-05 15:20 ` Pierre Ossman
2007-03-05 15:23 ` Pierre Ossman
2007-03-05 15:35 ` Mark Lord
2007-03-05 16:00 ` Pierre Ossman
2007-03-05 16:18 ` Mark Lord
2007-03-05 4:43 ` [BUG} usb regression in 2.6.21-rc2-git3 Mark Lord
2007-03-12 14:56 ` [BUG} usb-serial " Mark Lord
2007-03-12 15:06 ` Oliver Neukum
2007-03-12 15:13 ` Mark Lord
2007-03-12 15:27 ` Oliver Neukum
2007-03-12 15:29 ` Greg KH
2007-03-12 15:38 ` Oliver Neukum
2007-03-12 16:03 ` Mark Lord
2007-03-12 16:10 ` Greg KH
2007-03-12 16:22 ` Mark Lord
2007-03-12 16:11 ` Mark Lord
2007-03-12 16:14 ` Mark Lord
2007-03-12 16:27 ` Mark Lord
2007-03-12 16:50 ` Mark Lord
2007-03-12 18:48 ` Oliver Neukum
2007-03-12 20:22 ` [PATCH] usb-serial regression (Oops) in 2.6.21-rc* Mark Lord
2007-03-12 20:33 ` Greg KH
2007-03-12 22:20 ` Mark Lord
2007-03-12 22:42 ` Jim Radford
2007-03-12 22:59 ` [PATCH] usb-serial regression fix Jim Radford
2007-03-13 0:18 ` Greg KH
2007-03-13 0:41 ` Jim Radford
2007-03-13 1:55 ` Mark Lord
2007-03-13 9:14 ` Jim Radford
2007-03-13 10:14 ` Oliver Neukum
2007-03-13 13:39 ` Mark Lord
2007-03-13 13:50 ` Oliver Neukum
2007-03-13 13:55 ` Mark Lord
2007-03-13 15:30 ` Jim Radford
2007-03-13 16:35 ` Mark Lord
2007-03-12 16:28 ` [BUG} usb-serial regression in 2.6.21-rc2-git3 Oliver Neukum
2007-03-12 15:31 ` Greg KH
2007-03-07 11:06 ` [1/6] 2.6.21-rc2: known regressions Jeff Garzik
2007-03-07 11:06 ` Jeff Garzik
2007-03-07 22:17 ` Albert Hopkins
2007-03-07 22:17 ` Albert Hopkins
2007-03-05 1:50 ` [2/6] " Adrian Bunk
2007-03-07 11:09 ` Jeff Garzik
2007-03-07 16:10 ` Linus Torvalds
2007-03-08 12:03 ` Ash Milsted
2007-03-08 12:31 ` Michael S. Tsirkin
2007-03-08 15:11 ` Jeff Chua
2007-03-08 18:01 ` Linus Torvalds
2007-03-08 19:06 ` Ingo Molnar
2007-03-08 19:10 ` Ingo Molnar
2007-03-08 19:10 ` Ingo Molnar
2007-03-08 19:47 ` Michael S. Tsirkin
2007-03-08 19:47 ` Michael S. Tsirkin
2007-03-08 20:10 ` Ingo Molnar
2007-03-08 19:25 ` Ingo Molnar
2007-03-08 23:07 ` Ingo Molnar
2007-03-08 23:12 ` Ingo Molnar
2007-03-08 23:28 ` Ingo Molnar
2007-03-08 23:49 ` Linus Torvalds
2007-03-08 23:49 ` Linus Torvalds
2007-03-09 10:56 ` Ingo Molnar
2007-03-09 18:00 ` Linus Torvalds
2007-03-09 11:19 ` Pavel Machek
2007-03-18 16:07 ` Ingo Molnar
2007-03-18 16:07 ` Ingo Molnar
2007-03-18 16:40 ` [linux-pm] " Jim Gettys
2007-03-19 19:08 ` BSOD (was: [2/6] 2.6.21-rc2: known regressions) Pete Zaitcev
2007-03-19 19:38 ` BSOD David Miller
2007-03-19 19:54 ` BSOD Jesse Barnes
2007-03-19 20:05 ` BSOD David Miller
2007-03-19 20:20 ` BSOD Jesse Barnes
2007-03-19 20:20 ` BSOD Jim Gettys
2007-03-20 9:19 ` BSOD Paul Mackerras
2007-03-20 20:33 ` BSOD Jim Gettys
2007-03-19 20:33 ` [linux-pm] [2/6] 2.6.21-rc2: known regressions Bill Davidsen
2007-03-19 20:33 ` Bill Davidsen
2007-03-19 22:08 ` Jim Gettys
2007-03-20 14:44 ` Bill Davidsen
2007-03-09 17:48 ` Johannes Stezenbach
2007-03-09 17:48 ` Johannes Stezenbach
2007-03-09 23:35 ` Pavel Machek
2007-03-09 23:35 ` Pavel Machek
2007-03-10 9:01 ` Ingo Molnar
2007-03-10 9:01 ` Ingo Molnar
2007-03-10 11:43 ` Stefan Seyfried
2007-03-10 11:43 ` Stefan Seyfried
2007-03-10 13:53 ` Johannes Stezenbach
2007-03-10 13:53 ` Johannes Stezenbach
2007-03-10 15:18 ` Ingo Molnar
2007-03-10 15:18 ` Ingo Molnar
2007-03-10 22:08 ` Pavel Machek
2007-03-10 22:08 ` Pavel Machek
2007-03-11 8:20 ` Ingo Molnar
2007-03-11 8:20 ` Ingo Molnar
2007-03-12 6:34 ` Stefan Seyfried
2007-03-12 6:34 ` Stefan Seyfried
2007-03-10 22:04 ` s2ram (was Re: [2/6] 2.6.21-rc2: known regressions) Pavel Machek
2007-03-10 22:04 ` Pavel Machek
2007-03-08 19:46 ` [2/6] 2.6.21-rc2: known regressions Michael S. Tsirkin
2007-03-08 19:57 ` Michael S. Tsirkin
2007-03-08 19:57 ` Michael S. Tsirkin
[not found] ` <20070311120802.GA8823@elte.hu>
2007-03-12 20:20 ` Michael S. Tsirkin
2007-03-17 21:41 ` Michael S. Tsirkin
2007-03-17 22:33 ` Thomas Gleixner
2007-03-21 17:28 ` Michael S. Tsirkin
2007-03-05 1:50 ` [3/6] " Adrian Bunk
2007-03-05 3:58 ` Michal Jaegermann
2007-03-06 17:08 ` Alan Cox
2007-03-07 11:12 ` Jeff Garzik
2007-03-07 11:12 ` Jeff Garzik
2007-03-10 1:09 ` Mathieu Bérard [this message]
2007-03-10 4:11 ` and try remove another quirk on this computers " Sergio Monteiro Basto
2007-03-10 5:41 ` Linus Torvalds
2007-03-11 4:32 ` Sergio Monteiro Basto
2007-03-12 11:37 ` Tejun Heo
2007-03-12 11:37 ` Tejun Heo
2007-03-13 12:31 ` Mathieu Bérard
2007-03-13 12:31 ` Mathieu Bérard
2007-03-13 12:41 ` Tejun Heo
2007-03-13 20:56 ` Mathieu Bérard
2007-03-14 6:07 ` Tejun Heo
2007-03-14 6:07 ` Tejun Heo
2007-03-14 10:49 ` Mathieu Bérard
2007-03-05 1:50 ` [4/6] " Adrian Bunk
2007-03-05 10:35 ` Antonino A. Daplas
2007-03-05 15:06 ` Andrew
2007-03-08 23:28 ` Len Brown
2007-03-09 19:25 ` Andrew
2007-03-05 12:21 ` Richard Purdie
2007-03-08 7:43 ` [GIT PULL] ibm-acpi 2.6.21-rc3 regression fixes Henrique de Moraes Holschuh
2007-03-08 8:28 ` [PATCH] ACPI: ibm-acpi: fix initial status of backlight device Henrique de Moraes Holschuh
2007-03-09 1:23 ` Len Brown
2007-03-08 8:28 ` [PATCH] ACPI: ibm-acpi: improve backlight power handling Henrique de Moraes Holschuh
2007-03-09 1:25 ` Len Brown
2007-03-05 1:50 ` [5/6] 2.6.21-rc2: known regressions Adrian Bunk
2007-03-05 7:57 ` Ingo Molnar
2007-03-05 8:13 ` Andrew Morton
2007-03-05 15:25 ` Daniel Walker
2007-03-05 15:27 ` Ingo Molnar
2007-03-05 16:42 ` Daniel Walker
2007-03-05 19:30 ` Ingo Molnar
2007-03-05 16:14 ` Bill Davidsen
2007-03-05 16:21 ` Ingo Molnar
2007-03-05 23:12 ` Adrian Bunk
2007-03-05 23:43 ` Thomas Gleixner
2007-03-05 23:45 ` Linus Torvalds
2007-03-06 0:25 ` Thomas Gleixner
2007-03-06 6:49 ` Soeren Sonnenburg
2007-03-06 7:49 ` Soeren Sonnenburg
2007-03-06 0:38 ` Linus Torvalds
2007-03-06 1:02 ` Thomas Gleixner
2007-03-06 1:31 ` Linus Torvalds
2007-03-06 2:18 ` Linus Torvalds
2007-03-06 7:25 ` Ingo Molnar
2007-03-06 8:09 ` Thomas Gleixner
2007-03-06 10:33 ` Michael S. Tsirkin
2007-03-06 10:37 ` Ingo Molnar
2007-03-06 10:46 ` Michael S. Tsirkin
2007-03-06 11:32 ` Ingo Molnar
2007-03-06 12:20 ` Michael S. Tsirkin
2007-03-06 16:44 ` Linus Torvalds
2007-03-06 17:05 ` Ingo Molnar
2007-03-06 17:29 ` [PATCH] highres: do not run the TIMER_SOFTIRQ after switching to highres mode Thomas Gleixner
2007-03-06 17:41 ` Linus Torvalds
2007-03-16 15:18 ` [5/6] 2.6.21-rc2: known regressions Randy Dunlap
2007-03-06 11:36 ` Soeren Sonnenburg
2007-03-06 12:07 ` Ingo Molnar
2007-03-06 12:15 ` Michael S. Tsirkin
2007-03-06 12:51 ` Ingo Molnar
2007-03-06 12:55 ` Michael S. Tsirkin
2007-03-06 13:03 ` Ingo Molnar
2007-03-06 13:09 ` Thomas Gleixner
2007-03-06 12:09 ` Jeff Chua
2007-03-11 17:32 ` Pavel Machek
2007-03-06 10:33 ` Michael S. Tsirkin
2007-03-05 1:50 ` [6/6] " Adrian Bunk
2007-03-05 1:50 ` Adrian Bunk
2007-03-05 2:07 ` David Miller
2007-03-05 2:07 ` David Miller
2007-03-05 2:26 ` Adrian Bunk
2007-03-05 2:26 ` Adrian Bunk
2007-03-05 2:29 ` David Miller
2007-03-05 2:29 ` David Miller
2007-03-05 4:42 ` David Miller
2007-03-05 4:42 ` David Miller
2007-03-05 3:32 ` Greg KH
2007-03-05 3:32 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45F20541.9090208@crans.org \
--to=mathieu.berard@crans.org \
--cc=akpm@linux-foundation.org \
--cc=bunk@stusta.de \
--cc=darkcore71@yahoo.fr \
--cc=fabio.comolli@gmail.com \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=jmachowinski@gmx.de \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal@ellpspace.math.ualberta.ca \
--cc=mroos@linux.ee \
--cc=robert.moore@intel.com \
--cc=torvalds@linux-foundation.org \
--cc=trenn@suse.de \
--cc=xhejtman@fi.muni.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.