From: Mark Lord <lkml@rtr.ca>
To: Greg KH <greg@kroah.com>
Cc: Oliver Neukum <oneukum@suse.de>, Adrian Bunk <bunk@stusta.de>,
Andrew Morton <akpm@linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [BUG} usb-serial regression in 2.6.21-rc2-git3
Date: Mon, 12 Mar 2007 12:11:36 -0400 [thread overview]
Message-ID: <45F57BB8.5010705@rtr.ca> (raw)
In-Reply-To: <45F579CF.7040802@rtr.ca>
Mark Lord wrote:
> Greg KH wrote:
>> Does userspace have it open when you suspend/resume?
>
> For the ooops I just posted, yes, I may have left Linux ckermit
> running on the serial port before the suspend.
Here's a retest under linux-2.6.21-rc3-git7,
doing suspend/resume (RAM) with ckermit open on the serial port.
(LONG, Ooops at the bottom).
12:06:54 kernel: Stopping tasks ... done.
12:06:54 kernel: Suspending console(s)
12:06:54 kernel: pl2303 5-5.3:1.0: no suspend for driver pl2303?
12:06:54 kernel: ACPI: PCI interrupt for device 0000:03:01.2 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1f.2 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1e.2 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.7 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.3 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.2 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.1 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.0 disabled
12:06:54 kernel: Intel machine check architecture supported.
12:06:54 kernel: Intel machine check reporting enabled on CPU#0.
12:06:54 kernel: Back to C!
12:06:54 kernel: PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2000d0d0, writing d0d0)
12:06:54 kernel: PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010)
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
12:06:54 kernel: usb usb1: root hub lost power or was reset
12:06:54 kernel: PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20a)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing bf61)
12:06:54 kernel: usb usb2: root hub lost power or was reset
12:06:54 kernel: PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 309)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing bf41)
12:06:54 kernel: usb usb3: root hub lost power or was reset
12:06:54 kernel: PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 407)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.3 at offset 8 (was 1, writing bf21)
12:06:54 kernel: usb usb4: root hub lost power or was reset
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
12:06:54 kernel: usb usb5: root hub lost power or was reset
12:06:54 kernel: ehci_hcd 0000:00:1d.7: debug port 1
12:06:54 kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 8bf18801)
12:06:54 NetworkManager: <information>^ISWITCH: terminating current connection 'eth0' because it's no longer valid.
12:06:54 NetworkManager: <information>^IDeactivating device eth0.
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing dfc0dfc0)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 2280e0f0, writing 22802020)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20030300, writing 20070300)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100107)
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset f (was 100, writing 10b)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 7 (was 0, writing dffffd00)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 6 (was 0, writing dffffe00)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 5 (was 1, writing ec41)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 4 (was 1, writing ed01)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 1 (was 2900000, writing 2900003)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1e.2 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2000007, writing 2000107)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.2 at offset 9 (was d0000, writing 0)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.3 at offset f (was 200, writing 20a)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.3 at offset 1 (was 2800001, writing 2800101)
12:06:54 kernel: PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 10b)
12:06:54 kernel: PM: Writing back config space on device 0000:01:00.0 at offset c (was 0, writing dfe00000)
12:06:54 kernel: PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, writing 10)
12:06:54 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
12:06:54 kernel: PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 109)
12:06:54 kernel: PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 0, writing dfcfe000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 4000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100106)
12:06:54 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset f (was 7800100, writing 58001ff)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset e (was 0, writing 24fc)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset d (was 0, writing 2400)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset c (was 0, writing 20fc)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset b (was 0, writing 2000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset a (was 0, writing 8ffff000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 9 (was 0, writing 8c000000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 8 (was 0, writing 8bfff000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 7 (was 0, writing 88000000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 6 (was 0, writing b0070403)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 4 (was 0, writing dfc00000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 820000, writing 82a800)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.1 at offset 4 (was 0, writing dfcfc800)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.1 at offset 3 (was 800000, writing 804000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.1 at offset 1 (was 2100000, writing 2100106)
12:06:54 kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfcfc800-dfcfcfff] Max Packet=[2048] IR/IT contexts=[4/4]
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.2 at offset 4 (was 0, writing dfcfc700)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.2 at offset 3 (was 800000, writing 804000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.2 at offset 1 (was 2100000, writing 2100106)
12:06:54 kernel: ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 18
12:06:54 kernel: PM: Writing back config space on device 0000:03:03.0 at offset f (was 18030100, writing 1803010a)
12:06:54 kernel: PM: Writing back config space on device 0000:03:03.0 at offset 4 (was 0, writing dfcfd000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:03.0 at offset 3 (was 0, writing 4010)
12:06:54 kernel: PM: Writing back config space on device 0000:03:03.0 at offset 1 (was 2900000, writing 2900112)
12:06:54 kernel: pnp: Device 00:04 does not support activation.
12:06:54 kernel: pnp: Device 00:05 does not support activation.
12:06:54 kernel: usbdev5.2_ep00: PM: resume from 0, parent 5-5 still 2
12:06:54 kernel: hub 5-5:1.0: PM: resume from 2, parent 5-5 still 2
12:06:54 kernel: usbdev5.2_ep81: PM: resume from 0, parent 5-5:1.0 still 2
12:06:54 kernel: usbdev5.2: PM: resume from 0, parent 5-5 still 2
12:06:54 kernel: usb 5-5.3: PM: resume from 2, parent 5-5 still 2
12:06:54 kernel: usbdev5.3_ep00: PM: resume from 0, parent 5-5.3 still 2
12:06:54 kernel: pl2303 5-5.3:1.0: PM: resume from 2, parent 5-5.3 still 2
12:06:54 kernel: usbdev5.3_ep81: PM: resume from 0, parent 5-5.3:1.0 still 2
12:06:54 kernel: usbdev5.3_ep02: PM: resume from 0, parent 5-5.3:1.0 still 2
12:06:54 kernel: usbdev5.3_ep83: PM: resume from 0, parent 5-5.3:1.0 still 2
12:06:54 kernel: usbdev5.3: PM: resume from 0, parent 5-5.3 still 2
12:06:54 kernel: usb 5-5.4: PM: resume from 2, parent 5-5 still 2
12:06:54 kernel: usbdev5.4_ep00: PM: resume from 0, parent 5-5.4 still 2
12:06:54 kernel: usbhid 5-5.4:1.0: PM: resume from 2, parent 5-5.4 still 2
12:06:54 kernel: usbdev5.4_ep81: PM: resume from 0, parent 5-5.4:1.0 still 2
12:06:54 kernel: usbdev5.4: PM: resume from 0, parent 5-5.4 still 2
12:06:54 kernel: pl2303 ttyUSB0: PM: resume from 0, parent 5-5.3:1.0 still 2
12:06:54 kernel: Restarting tasks ... done.
12:06:54 kernel: usb 5-5: USB disconnect, address 2
12:06:54 kernel: usb 5-5.3: USB disconnect, address 3
12:06:54 kernel: pl2303 5-5.3:1.0: device disconnected
12:06:54 kernel: usb 5-5.4: USB disconnect, address 4
12:06:54 kernel: ata1.00: configured for UDMA/100
12:06:54 kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
12:06:54 kernel: sda: Write Protect is off
12:06:54 kernel: sda: Mode Sense: 00 3a 00 00
12:06:54 dhclient: DHCPRELEASE on eth0 to 10.0.0.2 port 67
12:06:54 kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
12:06:54 dhcdbd: dhco_value_from_text: Non ascii char outside valid hex string: 0
12:06:54 dhcdbd: dhco_input_option: Value silvy cannot be converted to type X
12:06:54 dhcdbd: dhco_parse_option_settings: bad option setting: old_host_name = silvy
12:06:54 kernel: usb 5-5: new high speed USB device using ehci_hcd and address 5
12:06:54 kernel: usb 5-5: configuration #1 chosen from 1 choice
12:06:55 kernel: hub 5-5:1.0: USB hub found
12:06:55 kernel: hub 5-5:1.0: 4 ports detected
12:06:55 kernel: ata2.00: configured for UDMA/33
12:06:55 kernel: [drm] Loading R300 Microcode
12:06:55 kernel: usb 5-5.3: new full speed USB device using ehci_hcd and address 6
12:06:55 kernel: usb 5-5.3: configuration #1 chosen from 1 choice
12:06:55 kernel: pl2303 5-5.3:1.0: pl2303 converter detected
12:06:55 kernel: usb 5-5.3: pl2303 converter now attached to ttyUSB1
12:06:55 NetworkManager: nm_device_is_802_3_ethernet: assertion `dev != NULL' failed
12:06:55 NetworkManager: nm_device_is_802_11_wireless: assertion `dev != NULL' failed
12:06:55 NetworkManager: <information>^Imatch
12:06:55 NetworkManager: <information>^Imatch
12:06:55 kernel: usb 5-5.4: new low speed USB device using ehci_hcd and address 7
12:06:55 kernel: usb 5-5.4: configuration #1 chosen from 1 choice
12:06:55 kernel: input: Logitech Optical USB Mouse as /class/input/input8
12:06:55 kernel: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-5.4
12:06:56 kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
12:06:56 kernel: b44: eth0: Flow control is off for TX and off for RX.
12:06:56 NetworkManager: <information>^IWill activate wired connection 'eth0' because it now has a link.
12:06:56 NetworkManager: <information>^ISWITCH: no current connection, found better connection 'eth0'.
12:06:56 NetworkManager: <information>^IWill activate connection 'eth0'.
12:06:56 NetworkManager: <information>^IDevice eth0 activation scheduled...
12:06:56 NetworkManager: <information>^IActivation (eth0) started...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 1 of 5 (Device Prepare) started...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 2 of 5 (Device Configure) scheduled...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 1 of 5 (Device Prepare) complete.
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 2 of 5 (Device Configure) starting...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 2 of 5 (Device Configure) successful.
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 2 of 5 (Device Configure) complete.
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 3 of 5 (IP Configure Start) started...
12:06:56 NetworkManager: <information>^Imatch
12:06:57 NetworkManager: <information>^IActivation (eth0) Beginning DHCP transaction.
12:06:57 NetworkManager: <information>^IActivation (eth0) Stage 3 of 5 (IP Configure Start) complete.
12:06:57 NetworkManager: <information>^IDHCP daemon state is now 12 (successfully started) for interface eth0
12:06:58 NetworkManager: <information>^IDHCP daemon state is now 1 (starting) for interface eth0
12:06:59 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
12:06:59 dhclient: DHCPOFFER from 10.0.0.2
12:06:59 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
12:06:59 dhclient: DHCPACK from 10.0.0.2
12:06:59 dhclient: bound to 10.0.0.14 -- renewal in 34884 seconds.
12:06:59 kernel: pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
12:06:59 kernel: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000168
12:06:59 kernel: printing eip:
12:06:59 kernel: f89fe1f6
12:06:59 kernel: *pde = 00000000
12:06:59 kernel: Oops: 0000 [#1]
12:06:59 kernel: PREEMPT
12:06:59 kernel: Modules linked in: radeon drm nfsd exportfs lockd nfs_acl sunrpc acpi_cpufreq cpufreq_ondemand cpufreq_powersave cpufreq_userspace cpufreq_stats freq_table cpufreq_conservative ac fan button thermal video battery container processor rfcomm l2cap bluetooth cfq_iosched deflate zlib_deflate twofish twofish_common serpent blowfish des cbc ecb blkcipher aes xcbc sha256 sha1 crypto_null af_key af_packet sbp2 usbhid hid pl2303 usbserial mousedev pcmcia snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer ipw2200 snd ieee80211 ieee80211_crypt ohci1394 serio_raw psmouse soundcore snd_page_alloc pcspkr sdhci firmware_class ahci ieee1394 yenta_socket rsrc_nonstatic pcmcia_core ehci_hcd mmc_core b44 mii uhci_hcd usbcore intel_agp agpgart sg sr_mod cdrom unix
12:06:59 kernel: CPU: 0
12:06:59 kernel: EIP: 0060:[<f89fe1f6>] Not tainted VLI
12:06:59 kernel: EFLAGS: 00010297 (2.6.21-rc3-git7 #7)
12:06:59 kernel: EIP is at pl2303_shutdown+0x37/0x70 [pl2303]
12:06:59 kernel: eax: 00000000 ebx: f7560d80 ecx: c20df5c0 edx: f89fe1bf
12:06:59 kernel: esi: f7560d80 edi: 00000000 ebp: f7560d80 esp: f5d45e78
12:06:59 kernel: ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
12:06:59 kernel: Process kermit (pid: 4403, ti=f5d44000 task=f5cdb0b0 task.ti=f5d44000)
12:06:59 kernel: Stack: c01ab1b5 f7b39a78 00000000 f7560d80 00000001 00000000 00000000 f8a29ca1
12:06:59 kernel: 00200200 f7b39a00 f7b39a08 f5f71bc0 f7560db4 f8a29c18 c01ab1b5 c01e5b0c
12:06:59 kernel: f5f634cc f5f63400 f5f63400 f5f63400 f5f71bc0 c01e7758 f6c4bc40 c0138a0a
12:06:59 kernel: Call Trace:
12:06:59 kernel: [kref_put+95/110] kref_put+0x5f/0x6e
12:06:59 kernel: [<f8a29ca1>] destroy_serial+0x89/0x122 [usbserial]
12:06:59 kernel: [<f8a29c18>] destroy_serial+0x0/0x122 [usbserial]
12:06:59 kernel: [kref_put+95/110] kref_put+0x5f/0x6e
12:06:59 kernel: [tty_fasync+60/180] tty_fasync+0x3c/0xb4
12:06:59 kernel: [release_dev+484/1496] release_dev+0x1e4/0x5d8
12:06:59 kernel: [find_get_page+21/69] find_get_page+0x15/0x45
12:06:59 kernel: [filemap_nopage+385/726] filemap_nopage+0x181/0x2d6
12:06:59 kernel: [pty_write+43/53] pty_write+0x2b/0x35
12:06:59 kernel: [getnstimeofday+48/216] getnstimeofday+0x30/0xd8
12:06:59 kernel: [enqueue_hrtimer+256/268] enqueue_hrtimer+0x100/0x10c
12:06:59 kernel: [tty_release+15/24] tty_release+0xf/0x18
12:06:59 kernel: [__fput+150/336] __fput+0x96/0x150
12:06:59 kernel: [filp_close+79/86] filp_close+0x4f/0x56
12:06:59 kernel: [sys_close+117/183] sys_close+0x75/0xb7
12:06:59 kernel: [sysenter_past_esp+95/133] sysenter_past_esp+0x5f/0x85
12:06:59 kernel: =======================
12:06:59 kernel: Code: 2c a0 f8 00 74 1c c7 44 24 08 2f 04 a0 f8 c7 44 24 04 33 05 a0 f8 c7 04 24 09 06 a0 f8 e8 8f 9e 71 c7 89 ee 31 ff eb 2c 8b 46 14 <8b> 98 68 01 00 00 85 db 74 1b 8b 03 e8 f9 fd ff ff 89 d8 e8 95
12:06:59 kernel: EIP: [<f89fe1f6>] pl2303_shutdown+0x37/0x70 [pl2303] SS:ESP 0068:f5d45e78
next prev parent reply other threads:[~2007-03-12 16:11 UTC|newest]
Thread overview: 225+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-28 5:16 Linux 2.6.21-rc2 Linus Torvalds
2007-02-28 5:50 ` Gabriel C
2007-02-28 7:13 ` [PATCH] affinity is not defined in non-smp kernels - i386 Fernando Luis Vázquez Cao
2007-02-28 7:16 ` [PATCH] affinity is not defined in non-smp kernels - i386 (v2) Fernando Luis Vázquez Cao
2007-02-28 7:24 ` [PATCH] affinity is not defined in non-smp kernels - i386 Eric W. Biederman
2007-02-28 17:31 ` Bill Davidsen
2007-02-28 18:21 ` Eric W. Biederman
2007-02-28 18:30 ` Linus Torvalds
2007-02-28 7:42 ` [PATCH] affinity is not defined in non-smp kernels - i386 (v2) Fernando Luis Vázquez Cao
2007-02-28 7:17 ` [PATCH] affinity is not defined in non-smp kernels - x86_64 Fernando Luis Vázquez Cao
2007-02-28 7:23 ` Linux 2.6.21-rc2 David Brown
2007-02-28 7:39 ` Brice Goglin
2007-02-28 13:09 ` Eric W. Biederman
2007-02-28 16:44 ` David Brown
2007-02-28 17:07 ` Randy Dunlap
2007-02-28 7:41 ` [PATCH] affinity is not defined in non-smp kernels - x86_64 Fernando Luis Vázquez Cao
2007-02-28 7:59 ` Linux 2.6.21-rc2 Damien Wyart
2007-03-05 1:50 ` [1/6] 2.6.21-rc2: known regressions Adrian Bunk
2007-03-05 1:50 ` Adrian Bunk
2007-03-05 2:26 ` Andrew Morton
2007-03-05 2:26 ` Andrew Morton
2007-03-05 3:35 ` Greg KH
2007-03-06 0:55 ` Johannes Berg
2007-03-06 0:55 ` Johannes Berg
2007-03-05 4:01 ` Mark Lord
2007-03-05 4:01 ` Mark Lord
2007-03-05 4:34 ` Greg KH
2007-03-05 12:42 ` Marcel Holtmann
2007-03-05 12:42 ` Marcel Holtmann
2007-03-05 4:34 ` [BUG} usb regression in 2.6.21-rc2-git3 Mark Lord
2007-03-05 4:37 ` [BUG] sdhci regression in 2.6.21-rc2 Mark Lord
2007-03-05 5:36 ` Pierre Ossman
2007-03-05 14:25 ` Mark Lord
2007-03-05 15:19 ` Mark Lord
2007-03-06 4:17 ` Andrew Morton
2007-03-06 5:47 ` Pierre Ossman
2007-03-06 6:09 ` Andrew Morton
2007-03-06 7:23 ` Pierre Ossman
2007-03-05 15:20 ` Pierre Ossman
2007-03-05 15:23 ` Pierre Ossman
2007-03-05 15:35 ` Mark Lord
2007-03-05 16:00 ` Pierre Ossman
2007-03-05 16:18 ` Mark Lord
2007-03-05 4:43 ` [BUG} usb regression in 2.6.21-rc2-git3 Mark Lord
2007-03-12 14:56 ` [BUG} usb-serial " Mark Lord
2007-03-12 15:06 ` Oliver Neukum
2007-03-12 15:13 ` Mark Lord
2007-03-12 15:27 ` Oliver Neukum
2007-03-12 15:29 ` Greg KH
2007-03-12 15:38 ` Oliver Neukum
2007-03-12 16:03 ` Mark Lord
2007-03-12 16:10 ` Greg KH
2007-03-12 16:22 ` Mark Lord
2007-03-12 16:11 ` Mark Lord [this message]
2007-03-12 16:14 ` Mark Lord
2007-03-12 16:27 ` Mark Lord
2007-03-12 16:50 ` Mark Lord
2007-03-12 18:48 ` Oliver Neukum
2007-03-12 20:22 ` [PATCH] usb-serial regression (Oops) in 2.6.21-rc* Mark Lord
2007-03-12 20:33 ` Greg KH
2007-03-12 22:20 ` Mark Lord
2007-03-12 22:42 ` Jim Radford
2007-03-12 22:59 ` [PATCH] usb-serial regression fix Jim Radford
2007-03-13 0:18 ` Greg KH
2007-03-13 0:41 ` Jim Radford
2007-03-13 1:55 ` Mark Lord
2007-03-13 9:14 ` Jim Radford
2007-03-13 10:14 ` Oliver Neukum
2007-03-13 13:39 ` Mark Lord
2007-03-13 13:50 ` Oliver Neukum
2007-03-13 13:55 ` Mark Lord
2007-03-13 15:30 ` Jim Radford
2007-03-13 16:35 ` Mark Lord
2007-03-12 16:28 ` [BUG} usb-serial regression in 2.6.21-rc2-git3 Oliver Neukum
2007-03-12 15:31 ` Greg KH
2007-03-07 11:06 ` [1/6] 2.6.21-rc2: known regressions Jeff Garzik
2007-03-07 11:06 ` Jeff Garzik
2007-03-07 22:17 ` Albert Hopkins
2007-03-07 22:17 ` Albert Hopkins
2007-03-05 1:50 ` [2/6] " Adrian Bunk
2007-03-07 11:09 ` Jeff Garzik
2007-03-07 16:10 ` Linus Torvalds
2007-03-08 12:03 ` Ash Milsted
2007-03-08 12:31 ` Michael S. Tsirkin
2007-03-08 15:11 ` Jeff Chua
2007-03-08 18:01 ` Linus Torvalds
2007-03-08 19:06 ` Ingo Molnar
2007-03-08 19:10 ` Ingo Molnar
2007-03-08 19:10 ` Ingo Molnar
2007-03-08 19:47 ` Michael S. Tsirkin
2007-03-08 19:47 ` Michael S. Tsirkin
2007-03-08 20:10 ` Ingo Molnar
2007-03-08 19:25 ` Ingo Molnar
2007-03-08 23:07 ` Ingo Molnar
2007-03-08 23:12 ` Ingo Molnar
2007-03-08 23:28 ` Ingo Molnar
2007-03-08 23:49 ` Linus Torvalds
2007-03-08 23:49 ` Linus Torvalds
2007-03-09 10:56 ` Ingo Molnar
2007-03-09 18:00 ` Linus Torvalds
2007-03-09 11:19 ` Pavel Machek
2007-03-18 16:07 ` Ingo Molnar
2007-03-18 16:07 ` Ingo Molnar
2007-03-18 16:40 ` [linux-pm] " Jim Gettys
2007-03-19 19:08 ` BSOD (was: [2/6] 2.6.21-rc2: known regressions) Pete Zaitcev
2007-03-19 19:38 ` BSOD David Miller
2007-03-19 19:54 ` BSOD Jesse Barnes
2007-03-19 20:05 ` BSOD David Miller
2007-03-19 20:20 ` BSOD Jesse Barnes
2007-03-19 20:20 ` BSOD Jim Gettys
2007-03-20 9:19 ` BSOD Paul Mackerras
2007-03-20 20:33 ` BSOD Jim Gettys
2007-03-19 20:33 ` [linux-pm] [2/6] 2.6.21-rc2: known regressions Bill Davidsen
2007-03-19 20:33 ` Bill Davidsen
2007-03-19 22:08 ` Jim Gettys
2007-03-20 14:44 ` Bill Davidsen
2007-03-09 17:48 ` Johannes Stezenbach
2007-03-09 17:48 ` Johannes Stezenbach
2007-03-09 23:35 ` Pavel Machek
2007-03-09 23:35 ` Pavel Machek
2007-03-10 9:01 ` Ingo Molnar
2007-03-10 9:01 ` Ingo Molnar
2007-03-10 11:43 ` Stefan Seyfried
2007-03-10 11:43 ` Stefan Seyfried
2007-03-10 13:53 ` Johannes Stezenbach
2007-03-10 13:53 ` Johannes Stezenbach
2007-03-10 15:18 ` Ingo Molnar
2007-03-10 15:18 ` Ingo Molnar
2007-03-10 22:08 ` Pavel Machek
2007-03-10 22:08 ` Pavel Machek
2007-03-11 8:20 ` Ingo Molnar
2007-03-11 8:20 ` Ingo Molnar
2007-03-12 6:34 ` Stefan Seyfried
2007-03-12 6:34 ` Stefan Seyfried
2007-03-10 22:04 ` s2ram (was Re: [2/6] 2.6.21-rc2: known regressions) Pavel Machek
2007-03-10 22:04 ` Pavel Machek
2007-03-08 19:46 ` [2/6] 2.6.21-rc2: known regressions Michael S. Tsirkin
2007-03-08 19:57 ` Michael S. Tsirkin
2007-03-08 19:57 ` Michael S. Tsirkin
[not found] ` <20070311120802.GA8823@elte.hu>
2007-03-12 20:20 ` Michael S. Tsirkin
2007-03-17 21:41 ` Michael S. Tsirkin
2007-03-17 22:33 ` Thomas Gleixner
2007-03-21 17:28 ` Michael S. Tsirkin
2007-03-05 1:50 ` [3/6] " Adrian Bunk
2007-03-05 3:58 ` Michal Jaegermann
2007-03-06 17:08 ` Alan Cox
2007-03-07 11:12 ` Jeff Garzik
2007-03-07 11:12 ` Jeff Garzik
2007-03-10 1:09 ` Mathieu Bérard
2007-03-10 4:11 ` and try remove another quirk on this computers " Sergio Monteiro Basto
2007-03-10 5:41 ` Linus Torvalds
2007-03-11 4:32 ` Sergio Monteiro Basto
2007-03-12 11:37 ` Tejun Heo
2007-03-12 11:37 ` Tejun Heo
2007-03-13 12:31 ` Mathieu Bérard
2007-03-13 12:31 ` Mathieu Bérard
2007-03-13 12:41 ` Tejun Heo
2007-03-13 20:56 ` Mathieu Bérard
2007-03-14 6:07 ` Tejun Heo
2007-03-14 6:07 ` Tejun Heo
2007-03-14 10:49 ` Mathieu Bérard
2007-03-05 1:50 ` [4/6] " Adrian Bunk
2007-03-05 10:35 ` Antonino A. Daplas
2007-03-05 15:06 ` Andrew
2007-03-08 23:28 ` Len Brown
2007-03-09 19:25 ` Andrew
2007-03-05 12:21 ` Richard Purdie
2007-03-08 7:43 ` [GIT PULL] ibm-acpi 2.6.21-rc3 regression fixes Henrique de Moraes Holschuh
2007-03-08 8:28 ` [PATCH] ACPI: ibm-acpi: fix initial status of backlight device Henrique de Moraes Holschuh
2007-03-09 1:23 ` Len Brown
2007-03-08 8:28 ` [PATCH] ACPI: ibm-acpi: improve backlight power handling Henrique de Moraes Holschuh
2007-03-09 1:25 ` Len Brown
2007-03-05 1:50 ` [5/6] 2.6.21-rc2: known regressions Adrian Bunk
2007-03-05 7:57 ` Ingo Molnar
2007-03-05 8:13 ` Andrew Morton
2007-03-05 15:25 ` Daniel Walker
2007-03-05 15:27 ` Ingo Molnar
2007-03-05 16:42 ` Daniel Walker
2007-03-05 19:30 ` Ingo Molnar
2007-03-05 16:14 ` Bill Davidsen
2007-03-05 16:21 ` Ingo Molnar
2007-03-05 23:12 ` Adrian Bunk
2007-03-05 23:43 ` Thomas Gleixner
2007-03-05 23:45 ` Linus Torvalds
2007-03-06 0:25 ` Thomas Gleixner
2007-03-06 6:49 ` Soeren Sonnenburg
2007-03-06 7:49 ` Soeren Sonnenburg
2007-03-06 0:38 ` Linus Torvalds
2007-03-06 1:02 ` Thomas Gleixner
2007-03-06 1:31 ` Linus Torvalds
2007-03-06 2:18 ` Linus Torvalds
2007-03-06 7:25 ` Ingo Molnar
2007-03-06 8:09 ` Thomas Gleixner
2007-03-06 10:33 ` Michael S. Tsirkin
2007-03-06 10:37 ` Ingo Molnar
2007-03-06 10:46 ` Michael S. Tsirkin
2007-03-06 11:32 ` Ingo Molnar
2007-03-06 12:20 ` Michael S. Tsirkin
2007-03-06 16:44 ` Linus Torvalds
2007-03-06 17:05 ` Ingo Molnar
2007-03-06 17:29 ` [PATCH] highres: do not run the TIMER_SOFTIRQ after switching to highres mode Thomas Gleixner
2007-03-06 17:41 ` Linus Torvalds
2007-03-16 15:18 ` [5/6] 2.6.21-rc2: known regressions Randy Dunlap
2007-03-06 11:36 ` Soeren Sonnenburg
2007-03-06 12:07 ` Ingo Molnar
2007-03-06 12:15 ` Michael S. Tsirkin
2007-03-06 12:51 ` Ingo Molnar
2007-03-06 12:55 ` Michael S. Tsirkin
2007-03-06 13:03 ` Ingo Molnar
2007-03-06 13:09 ` Thomas Gleixner
2007-03-06 12:09 ` Jeff Chua
2007-03-11 17:32 ` Pavel Machek
2007-03-06 10:33 ` Michael S. Tsirkin
2007-03-05 1:50 ` [6/6] " Adrian Bunk
2007-03-05 1:50 ` Adrian Bunk
2007-03-05 2:07 ` David Miller
2007-03-05 2:07 ` David Miller
2007-03-05 2:26 ` Adrian Bunk
2007-03-05 2:26 ` Adrian Bunk
2007-03-05 2:29 ` David Miller
2007-03-05 2:29 ` David Miller
2007-03-05 4:42 ` David Miller
2007-03-05 4:42 ` David Miller
2007-03-05 3:32 ` Greg KH
2007-03-05 3:32 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45F57BB8.5010705@rtr.ca \
--to=lkml@rtr.ca \
--cc=akpm@linux-foundation.org \
--cc=bunk@stusta.de \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oneukum@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.