* [PATCH][TRIVIAL] Fix path to modules.txt in Kconfig help
@ 2007-03-16 13:28 Alexander E. Patrakov
0 siblings, 0 replies; only message in thread
From: Alexander E. Patrakov @ 2007-03-16 13:28 UTC (permalink / raw)
To: LKML; +Cc: Adrian Bunk
Documentation/modules.txt doesn't exist, but
Documentation/kbuild/modules.txt does.
Signed-off-by: Alexander E. Patrakov
--- linux/drivers/mtd/devices/Kconfig 2007-02-20 11:34:32.000000000 +0500
+++ linux/drivers/mtd/devices/Kconfig 2007-03-16 18:18:35.000000000 +0500
@@ -49,8 +49,8 @@
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module will
- be called ms02-nv.o.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ms02-nv.ko.
config MTD_DATAFLASH
tristate "Support for AT45xxx DataFlash"
--- linux/drivers/net/wireless/Kconfig 2007-02-20 11:34:32.000000000 +0500
+++ linux/drivers/net/wireless/Kconfig 2007-03-16 18:20:05.000000000 +0500
@@ -169,8 +169,8 @@
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ipw2100.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ipw2100.ko.
config IPW2100_MONITOR
bool "Enable promiscuous mode"
@@ -223,8 +223,8 @@
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ipw2200.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ipw2200.ko.
config IPW2200_MONITOR
bool "Enable promiscuous mode"
@@ -518,8 +518,8 @@
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called prism54.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called prism54.ko.
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
--- linux/drivers/net/Kconfig 2007-02-20 11:34:32.000000000 +0500
+++ linux/drivers/net/Kconfig 2007-03-16 18:20:53.000000000 +0500
@@ -843,8 +843,8 @@
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc91x. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ module, say M here and read <file:Documentation/kbuild/modules.txt>
+ as well as <file:Documentation/networking/net-modules.txt>.
config SMC9194
tristate "SMC 9194 support"
@@ -899,7 +899,7 @@
This driver is also available as a module. The module will be
called smc911x. If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>
+ here and read <file:Documentation/kbuild/modules.txt>
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
--- linux/drivers/scsi/Kconfig 2007-02-20 11:34:32.000000000 +0500
+++ linux/drivers/scsi/Kconfig 2007-03-16 18:15:44.000000000 +0500
@@ -170,7 +170,7 @@
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> and
+ say M here and read <file:Documentation/kbuild/modules.txt> and
<file:Documentation/scsi.txt>. The module will be called ch.o.
If unsure, say N.
@@ -1777,7 +1777,7 @@
This driver is also available as a module. This module will be
called zfcp. If you want to compile it as a module, say M here
- and read <file:Documentation/modules.txt>.
+ and read <file:Documentation/kbuild/modules.txt>.
config SCSI_SRP
tristate "SCSI RDMA Protocol helper library"
--- linux/drivers/video/Kconfig 2007-02-20 11:34:32.000000000 +0500
+++ linux/drivers/video/Kconfig 2007-03-16 18:15:44.000000000 +0500
@@ -175,7 +175,7 @@
If you want to compile this as a module (=code which can be
inserted into and removed from the running kernel), say M
- here and read <file:Documentation/modules.txt>. The module
+ here and read <file:Documentation/kbuild/modules.txt>. The module
will be called amba-clcd.
choice
@@ -1520,7 +1520,7 @@
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called pxafb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
@@ -1573,7 +1573,7 @@
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called w100fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
@@ -1590,7 +1590,7 @@
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
config FB_S3C2410_DEBUG
--- linux/net/ipv6/netfilter/Kconfig 2007-02-20 11:34:32.000000000 +0500
+++ linux/net/ipv6/netfilter/Kconfig 2007-03-16 18:15:44.000000000 +0500
@@ -189,7 +189,7 @@
and OUTPUT chains.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
endmenu
--- linux/net/netfilter/Kconfig 2007-02-20 11:34:32.000000000 +0500
+++ linux/net/netfilter/Kconfig 2007-03-16 18:22:22.000000000 +0500
@@ -132,7 +132,7 @@
tracking code will be able to do state tracking on SCTP connections.
If you want to compile it as a module, say M here and read
- Documentation/modules.txt. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NF_CONNTRACK_AMANDA
tristate "Amanda backup protocol support"
@@ -296,8 +296,8 @@
affects the connection mark value rather than the packet mark value.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. The module will be called
- ipt_CONNMARK.o. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. The module will be called
+ ipt_CONNMARK.ko. If unsure, say `N'.
config NETFILTER_XT_TARGET_DSCP
tristate '"DSCP" target support'
@@ -358,7 +358,7 @@
no protocol helpers for the selected packets).
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_TARGET_SECMARK
tristate '"SECMARK" target support'
@@ -390,7 +390,7 @@
comments in your iptables ruleset.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_CONNBYTES
tristate '"connbytes" per-connection counter match support'
@@ -401,7 +401,7 @@
number of bytes and/or packets for each direction within a connection.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_CONNMARK
tristate '"connmark" connection mark match support'
@@ -412,8 +412,8 @@
connection mark value previously set for the session by `CONNMARK'.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. The module will be called
- ipt_connmark.o. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. The module will be called
+ ipt_connmark.ko. If unsure, say `N'.
config NETFILTER_XT_MATCH_CONNTRACK
tristate '"conntrack" connection tracking match support'
@@ -437,7 +437,7 @@
and DCCP flags.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_DSCP
tristate '"DSCP" match support'
@@ -556,7 +556,7 @@
byte counter.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_REALM
tristate '"realm" match support'
@@ -570,7 +570,7 @@
in tc world.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_SCTP
tristate '"sctp" protocol match support (EXPERIMENTAL)'
@@ -581,7 +581,7 @@
and SCTP chunk types.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_STATE
tristate '"state" match support'
--- linux/net/tipc/Kconfig 2007-02-20 11:34:32.000000000 +0500
+++ linux/net/tipc/Kconfig 2007-03-16 18:15:44.000000000 +0500
@@ -18,7 +18,7 @@
This protocol support is also available as a module ( = code which
can be inserted in and removed from the running kernel whenever you
want). The module will be called tipc. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt>.
+ as a module, say M here and read <file:Documentation/kbuild/modules.txt>.
If in doubt, say N.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-03-16 13:28 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-03-16 13:28 [PATCH][TRIVIAL] Fix path to modules.txt in Kconfig help Alexander E. Patrakov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.