From: "Heiko Stübner" <heiko@sntech.de>
To: Diederik de Haas <didi.debian@cknow.org>
Cc: linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: (subset) [PATCH v2 0/4] rockchip: Fix several DT validation errors
Date: Fri, 18 Oct 2024 11:37:42 +0200 [thread overview]
Message-ID: <4604343.LvFx2qVVIh@diego> (raw)
In-Reply-To: <D4YTW4DVRT68.1Z97ZHDYWTKHT@cknow.org>
Hey,
Am Freitag, 18. Oktober 2024, 11:35:51 CEST schrieb Diederik de Haas:
> Hi Heiko,
>
> On Wed Oct 16, 2024 at 2:35 PM CEST, Diederik de Haas wrote:
> > On Wed Oct 16, 2024 at 11:41 AM CEST, Diederik de Haas wrote:
> > > On Tue Oct 8, 2024 at 9:28 PM CEST, Heiko Stuebner wrote:
> > > > On Tue, 8 Oct 2024 13:15:35 +0200, Diederik de Haas wrote:
> > > > > This is a set of 4 small device-tree validation fixes.
> > > > >
> > > > > Patch 1 adds the power-domains property to the csi dphy node on rk356x.
> > > > > Patch 2 removes the 2nd interrupt from the hdmi node on rk3328.
> > > > > Patch 3 replaces 'wake' with 'wakeup' on PineNote BT node.
> > > > > Patch 4 replaces 'reset-gpios' with 'shutdown-gpios' on brcm BT nodes.
> > > >
> > > > Applied, thanks!
> > > >
> > > > [2/4] arm64: dts: rockchip: Remove hdmi's 2nd interrupt on rk3328
> > > > commit: de50a7e3681771c6b990238af82bf1dea9b11b21
> > > > [3/4] arm64: dts: rockchip: Fix wakeup prop names on PineNote BT node
> > > > commit: 87299d6ee95a37d2d576dd8077ea6860f77ad8e2
> > > > [4/4] arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes
> > > > commit: 2b6a3f857550e52b1cd4872ebb13cb3e3cf12f5f
> > >
> > > Please revert the 4th patch.
> > >
> > > I must have messed up my testing previously, but BT does not work on the
> > > PineNote with the 4th patch applied and does work with it reverted.
> >
> > FWIW, I figured out what went wrong.
> > My testing was correct, but redo-ing the implementation to make it ready
> > for submission wasn't very smart.
> >
> > With ``shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;``
> > it does work correctly, but I forgot to change GPIO_ACTIVE_LOW to
> > GPIO_ACTIVE_HIGH before submitting.
> >
> > I'll first figure out a better procedure before making a new submission,
> > so the revert is still the best approach IMO.
>
> I've now done a new submission:
> https://lore.kernel.org/linux-rockchip/20241018092237.6774-1-didi.debian@cknow.org/
>
> So please don't revert the 4th patch now.
hehe ok :-) .
I meant to ask if the fix wasn't simply toggling the gpio polarity, and
I guess with your patch you were faster than my question.
Heiko
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Diederik de Haas <didi.debian@cknow.org>
Cc: linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: (subset) [PATCH v2 0/4] rockchip: Fix several DT validation errors
Date: Fri, 18 Oct 2024 11:37:42 +0200 [thread overview]
Message-ID: <4604343.LvFx2qVVIh@diego> (raw)
In-Reply-To: <D4YTW4DVRT68.1Z97ZHDYWTKHT@cknow.org>
Hey,
Am Freitag, 18. Oktober 2024, 11:35:51 CEST schrieb Diederik de Haas:
> Hi Heiko,
>
> On Wed Oct 16, 2024 at 2:35 PM CEST, Diederik de Haas wrote:
> > On Wed Oct 16, 2024 at 11:41 AM CEST, Diederik de Haas wrote:
> > > On Tue Oct 8, 2024 at 9:28 PM CEST, Heiko Stuebner wrote:
> > > > On Tue, 8 Oct 2024 13:15:35 +0200, Diederik de Haas wrote:
> > > > > This is a set of 4 small device-tree validation fixes.
> > > > >
> > > > > Patch 1 adds the power-domains property to the csi dphy node on rk356x.
> > > > > Patch 2 removes the 2nd interrupt from the hdmi node on rk3328.
> > > > > Patch 3 replaces 'wake' with 'wakeup' on PineNote BT node.
> > > > > Patch 4 replaces 'reset-gpios' with 'shutdown-gpios' on brcm BT nodes.
> > > >
> > > > Applied, thanks!
> > > >
> > > > [2/4] arm64: dts: rockchip: Remove hdmi's 2nd interrupt on rk3328
> > > > commit: de50a7e3681771c6b990238af82bf1dea9b11b21
> > > > [3/4] arm64: dts: rockchip: Fix wakeup prop names on PineNote BT node
> > > > commit: 87299d6ee95a37d2d576dd8077ea6860f77ad8e2
> > > > [4/4] arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes
> > > > commit: 2b6a3f857550e52b1cd4872ebb13cb3e3cf12f5f
> > >
> > > Please revert the 4th patch.
> > >
> > > I must have messed up my testing previously, but BT does not work on the
> > > PineNote with the 4th patch applied and does work with it reverted.
> >
> > FWIW, I figured out what went wrong.
> > My testing was correct, but redo-ing the implementation to make it ready
> > for submission wasn't very smart.
> >
> > With ``shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;``
> > it does work correctly, but I forgot to change GPIO_ACTIVE_LOW to
> > GPIO_ACTIVE_HIGH before submitting.
> >
> > I'll first figure out a better procedure before making a new submission,
> > so the revert is still the best approach IMO.
>
> I've now done a new submission:
> https://lore.kernel.org/linux-rockchip/20241018092237.6774-1-didi.debian@cknow.org/
>
> So please don't revert the 4th patch now.
hehe ok :-) .
I meant to ask if the fix wasn't simply toggling the gpio polarity, and
I guess with your patch you were faster than my question.
Heiko
next prev parent reply other threads:[~2024-10-18 9:38 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-08 11:15 [PATCH v2 0/4] rockchip: Fix several DT validation errors Diederik de Haas
2024-10-08 11:15 ` Diederik de Haas
2024-10-08 11:15 ` [PATCH v2 1/4] arm64: dts: rockchip: Add PD to csi dphy node on rk356x Diederik de Haas
2024-10-08 11:15 ` Diederik de Haas
2024-10-08 12:32 ` Michael Riesch
2024-10-08 12:32 ` Michael Riesch
2024-10-08 18:55 ` Diederik de Haas
2024-10-08 18:55 ` Diederik de Haas
2024-10-08 11:15 ` [PATCH v2 2/4] arm64: dts: rockchip: Remove hdmi's 2nd interrupt on rk3328 Diederik de Haas
2024-10-08 11:15 ` Diederik de Haas
2024-10-08 11:15 ` [PATCH v2 3/4] arm64: dts: rockchip: Fix wakeup prop names on PineNote BT node Diederik de Haas
2024-10-08 11:15 ` Diederik de Haas
2024-10-08 11:15 ` [PATCH v2 4/4] arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes Diederik de Haas
2024-10-08 11:15 ` Diederik de Haas
2024-10-08 19:28 ` (subset) [PATCH v2 0/4] rockchip: Fix several DT validation errors Heiko Stuebner
2024-10-08 19:28 ` Heiko Stuebner
2024-10-16 9:41 ` Diederik de Haas
2024-10-16 9:41 ` Diederik de Haas
2024-10-16 12:35 ` Diederik de Haas
2024-10-16 12:35 ` Diederik de Haas
2024-10-18 9:35 ` Diederik de Haas
2024-10-18 9:35 ` Diederik de Haas
2024-10-18 9:37 ` Heiko Stübner [this message]
2024-10-18 9:37 ` Heiko Stübner
2024-10-18 10:01 ` Diederik de Haas
2024-10-18 10:01 ` Diederik de Haas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4604343.LvFx2qVVIh@diego \
--to=heiko@sntech.de \
--cc=devicetree@vger.kernel.org \
--cc=didi.debian@cknow.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.