* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
@ 2007-03-28 8:28 Andy Johnson
2007-03-28 8:53 ` Jeff Mahoney
2007-03-28 9:23 ` Srinivas Eeda
0 siblings, 2 replies; 10+ messages in thread
From: Andy Johnson @ 2007-03-28 8:28 UTC (permalink / raw)
To: ocfs2-devel
Hello,
I have ocfs2-tools-1.2.3. ( built from sources)
I try:
mount /dev/vg1/cluster /mnt/ocfs2/
and get:
ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not
permitted"
What can be the cause of this error ? Any ideas?
(I tried it after service heartbeat stop)
Regards,
Andy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-devel/attachments/20070328/8e58374a/attachment.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
2007-03-28 8:28 [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat" Andy Johnson
@ 2007-03-28 8:53 ` Jeff Mahoney
2007-03-28 9:23 ` Srinivas Eeda
1 sibling, 0 replies; 10+ messages in thread
From: Jeff Mahoney @ 2007-03-28 8:53 UTC (permalink / raw)
To: ocfs2-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Andy Johnson wrote:
> Hello,
> I have ocfs2-tools-1.2.3. ( built from sources)
> I try:
> mount /dev/vg1/cluster /mnt/ocfs2/
> and get:
> ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
> mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation
> not permitted"
>
> What can be the cause of this error ? Any ideas?
>
> (I tried it after service heartbeat stop)
Check in your dmesg output - there's usually a message indicating why
heartbeat configuration has failed.
- -Jeff
- --
Jeff Mahoney
SUSE Labs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFGCo93LPWxlyuTD7IRAs5uAKCeBKih68JtrczHY/gCGhhOmaAEHACggqKm
aX8HXSI+NorpQA6dcNT6Kpo=
=of+E
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
2007-03-28 8:28 [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat" Andy Johnson
2007-03-28 8:53 ` Jeff Mahoney
@ 2007-03-28 9:23 ` Srinivas Eeda
2007-03-28 9:32 ` Sunil Mushran
2007-03-28 10:29 ` Andy Johnson
1 sibling, 2 replies; 10+ messages in thread
From: Srinivas Eeda @ 2007-03-28 9:23 UTC (permalink / raw)
To: ocfs2-devel
That might because you have configured user mode dlm. What does "|cat
/sys/o2cb/heartbeat_mode" show, "user"?. If so run, /etc/init.d/o2cb
configure and answer "n" for the following
||Use user-space driven heartbeat? (y/n) [y] n
thanks,
--Srini
||
|Andy Johnson wrote:
> Hello,
> I have ocfs2-tools-1.2.3. ( built from sources)
> I try:
> mount /dev/vg1/cluster /mnt/ocfs2/
> and get:
> ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
> mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
> "Operation not permitted"
>
> What can be the cause of this error ? Any ideas?
>
> (I tried it after service heartbeat stop)
>
> Regards,
> Andy
> ------------------------------------------------------------------------
>
> _______________________________________________
> Ocfs2-devel mailing list
> Ocfs2-devel@oss.oracle.com
> http://oss.oracle.com/mailman/listinfo/ocfs2-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
2007-03-28 9:23 ` Srinivas Eeda
@ 2007-03-28 9:32 ` Sunil Mushran
2007-03-28 10:29 ` Andy Johnson
1 sibling, 0 replies; 10+ messages in thread
From: Sunil Mushran @ 2007-03-28 9:32 UTC (permalink / raw)
To: ocfs2-devel
Or, he could just want to use the userspace hb. :)
In that case, check that setup.
Srinivas Eeda wrote:
> That might because you have configured user mode dlm. What does "|cat
> /sys/o2cb/heartbeat_mode" show, "user"?. If so run, /etc/init.d/o2cb
> configure and answer "n" for the following
> ||Use user-space driven heartbeat? (y/n) [y] n
>
> thanks,
> --Srini
> ||
>
> |Andy Johnson wrote:
>> Hello,
>> I have ocfs2-tools-1.2.3. ( built from sources)
>> I try:
>> mount /dev/vg1/cluster /mnt/ocfs2/
>> and get:
>> ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
>> mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
>> "Operation not permitted"
>>
>> What can be the cause of this error ? Any ideas?
>>
>> (I tried it after service heartbeat stop)
>>
>> Regards,
>> Andy
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Ocfs2-devel mailing list
>> Ocfs2-devel@oss.oracle.com
>> http://oss.oracle.com/mailman/listinfo/ocfs2-devel
>
>
> _______________________________________________
> Ocfs2-devel mailing list
> Ocfs2-devel@oss.oracle.com
> http://oss.oracle.com/mailman/listinfo/ocfs2-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
2007-03-28 9:23 ` Srinivas Eeda
2007-03-28 9:32 ` Sunil Mushran
@ 2007-03-28 10:29 ` Andy Johnson
2007-03-28 10:31 ` Jeff Mahoney
2007-03-28 10:33 ` Sunil Mushran
1 sibling, 2 replies; 10+ messages in thread
From: Andy Johnson @ 2007-03-28 10:29 UTC (permalink / raw)
To: ocfs2-devel
Hello,
NO such thing as /sys/o2cb/heartbeat_mode !
I tried :
/etc/init.d/o2cb load
Loading module "configfs": OK
Mounting configfs filesystem at /sys/kernel/config: OK
Loading module "ocfs2_nodemanager": OK
Loading module "ocfs2_dlm": OK
Loading module "ocfs2_dlmfs": OK
Mounting ocfs2_dlmfs filesystem at /dlm: OK
:/root# ls /sys/o2cb
interface_revision logmask
and
ls /sys/o2cb/logmask
ls /sys/o2cb/logmask -al
total 0
drwxr-xr-x 2 root root 0 Mar 28 19:28 .
drwxr-xr-x 3 root root 0 Mar 28 19:26 ..
-rw-r--r-- 1 root root 4096 Mar 28 19:28 AIO
-rw-r--r-- 1 root root 4096 Mar 28 19:28 BH_IO
-rw-r--r-- 1 root root 4096 Mar 28 19:28 CONN
-rw-r--r-- 1 root root 4096 Mar 28 19:28 DCACHE
-rw-r--r-- 1 root root 4096 Mar 28 19:28 DISK_ALLOC
-rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM
-rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_DOMAIN
-rw-r--r-- 1 root root 4096 Mar 28 19:28 DLMFS
-rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_GLUE
-rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_MASTER
-rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_RECOVERY
-rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_THREAD
-rw-r--r-- 1 root root 4096 Mar 28 19:28 ENTRY
-rw-r--r-- 1 root root 4096 Mar 28 19:28 ERROR
-rw-r--r-- 1 root root 4096 Mar 28 19:28 EXIT
-rw-r--r-- 1 root root 4096 Mar 28 19:28 EXPORT
-rw-r--r-- 1 root root 4096 Mar 28 19:28 EXTENT_MAP
-rw-r--r-- 1 root root 4096 Mar 28 19:28 FILE_IO
-rw-r--r-- 1 root root 4096 Mar 28 19:28 HB_BIO
-rw-r--r-- 1 root root 4096 Mar 28 19:28 HEARTBEAT
-rw-r--r-- 1 root root 4096 Mar 28 19:28 INODE
-rw-r--r-- 1 root root 4096 Mar 28 19:28 JOURNAL
-rw-r--r-- 1 root root 4096 Mar 28 19:28 KTHREAD
-rw-r--r-- 1 root root 4096 Mar 28 19:28 MSG
-rw-r--r-- 1 root root 4096 Mar 28 19:28 NAMEI
-rw-r--r-- 1 root root 4096 Mar 28 19:28 NOTICE
-rw-r--r-- 1 root root 4096 Mar 28 19:28 QUORUM
-rw-r--r-- 1 root root 4096 Mar 28 19:28 SOCKET
-rw-r--r-- 1 root root 4096 Mar 28 19:28 SUPER
-rw-r--r-- 1 root root 4096 Mar 28 19:28 TCP
-rw-r--r-- 1 root root 4096 Mar 28 19:28 UPTODATE
-rw-r--r-- 1 root root 4096 Mar 28 19:28 VOTE
and
cat /sys/o2cb/logmask/HEARTBEAT
off
Regards,
Andy
On 3/28/07, Srinivas Eeda <srinivas.eeda@oracle.com> wrote:
>
> That might because you have configured user mode dlm. What does "|cat
> /sys/o2cb/heartbeat_mode" show, "user"?. If so run, /etc/init.d/o2cb
> configure and answer "n" for the following
> ||Use user-space driven heartbeat? (y/n) [y] n
>
> thanks,
> --Srini
> ||
>
> |Andy Johnson wrote:
> > Hello,
> > I have ocfs2-tools-1.2.3. ( built from sources)
> > I try:
> > mount /dev/vg1/cluster /mnt/ocfs2/
> > and get:
> > ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
> > mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
> > "Operation not permitted"
> >
> > What can be the cause of this error ? Any ideas?
> >
> > (I tried it after service heartbeat stop)
> >
> > Regards,
> > Andy
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Ocfs2-devel mailing list
> > Ocfs2-devel@oss.oracle.com
> > http://oss.oracle.com/mailman/listinfo/ocfs2-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-devel/attachments/20070328/a74b6e27/attachment.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
2007-03-28 10:29 ` Andy Johnson
@ 2007-03-28 10:31 ` Jeff Mahoney
2007-03-28 10:33 ` Sunil Mushran
1 sibling, 0 replies; 10+ messages in thread
From: Jeff Mahoney @ 2007-03-28 10:31 UTC (permalink / raw)
To: ocfs2-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Andy Johnson wrote:
> Hello,
> NO such thing as /sys/o2cb/heartbeat_mode !
Yeah, that's a SUSE-specific extension to enable switching heartbeat modes.
- -Jeff
- --
Jeff Mahoney
SUSE Labs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFGCqZ/LPWxlyuTD7IRAromAKCHHnzoYcmEynkC5mRIvkQyEocfxQCeL80f
i5OOSxEiFN61EPHZCWmwLJU=
=jUL/
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
2007-03-28 10:29 ` Andy Johnson
2007-03-28 10:31 ` Jeff Mahoney
@ 2007-03-28 10:33 ` Sunil Mushran
2007-03-28 11:10 ` Andy Johnson
1 sibling, 1 reply; 10+ messages in thread
From: Sunil Mushran @ 2007-03-28 10:33 UTC (permalink / raw)
To: ocfs2-devel
He meant... cat /etc/sysconfig/o2cb
If you are using novell's userspace hb, then it will be listed there.
Andy Johnson wrote:
> Hello,
> NO such thing as /sys/o2cb/heartbeat_mode !
> I tried :
>
> /etc/init.d/o2cb load
> Loading module "configfs": OK
> Mounting configfs filesystem at /sys/kernel/config: OK
> Loading module "ocfs2_nodemanager": OK
> Loading module "ocfs2_dlm": OK
> Loading module "ocfs2_dlmfs": OK
> Mounting ocfs2_dlmfs filesystem at /dlm: OK
>
> :/root# ls /sys/o2cb
> interface_revision logmask
> and
>
> ls /sys/o2cb/logmask
> ls /sys/o2cb/logmask -al
> total 0
> drwxr-xr-x 2 root root 0 Mar 28 19:28 .
> drwxr-xr-x 3 root root 0 Mar 28 19:26 ..
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 AIO
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 BH_IO
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 CONN
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 DCACHE
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 DISK_ALLOC
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_DOMAIN
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLMFS
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_GLUE
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_MASTER
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_RECOVERY
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_THREAD
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 ENTRY
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 ERROR
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXIT
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXPORT
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXTENT_MAP
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 FILE_IO
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 HB_BIO
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 HEARTBEAT
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 INODE
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 JOURNAL
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 KTHREAD
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 MSG
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 NAMEI
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 NOTICE
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 QUORUM
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 SOCKET
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 SUPER
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 TCP
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 UPTODATE
> -rw-r--r-- 1 root root 4096 Mar 28 19:28 VOTE
>
> and
>
> cat /sys/o2cb/logmask/HEARTBEAT
> off
> Regards,
> Andy
>
>
>
> On 3/28/07, *Srinivas Eeda* < srinivas.eeda@oracle.com
> <mailto:srinivas.eeda@oracle.com>> wrote:
>
> That might because you have configured user mode dlm. What does "|cat
> /sys/o2cb/heartbeat_mode" show, "user"?. If so run, /etc/init.d/o2cb
> configure and answer "n" for the following
> ||Use user-space driven heartbeat? (y/n) [y] n
>
> thanks,
> --Srini
> ||
>
> |Andy Johnson wrote:
> > Hello,
> > I have ocfs2-tools-1.2.3. ( built from sources)
> > I try:
> > mount /dev/vg1/cluster /mnt/ocfs2/
> > and get:
> > ocfs2_hb_ctl: Unable to access cluster service while starting
> heartbeat
> > mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
> > "Operation not permitted"
> >
> > What can be the cause of this error ? Any ideas?
> >
> > (I tried it after service heartbeat stop)
> >
> > Regards,
> > Andy
> >
> ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Ocfs2-devel mailing list
> > Ocfs2-devel@oss.oracle.com <mailto:Ocfs2-devel@oss.oracle.com>
> > http://oss.oracle.com/mailman/listinfo/ocfs2-devel
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Ocfs2-devel mailing list
> Ocfs2-devel@oss.oracle.com
> http://oss.oracle.com/mailman/listinfo/ocfs2-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
2007-03-28 10:33 ` Sunil Mushran
@ 2007-03-28 11:10 ` Andy Johnson
2007-03-28 11:15 ` Sunil Mushran
2007-03-28 11:15 ` Jeff Mahoney
0 siblings, 2 replies; 10+ messages in thread
From: Andy Johnson @ 2007-03-28 11:10 UTC (permalink / raw)
To: ocfs2-devel
Sunil Mushran,
Are you sure ?
Before and **after**
"service hearbeat start"
I have the **same** results; heartbeat user space is not mentioned; This is
on fedora core 6.
here is what I get:
cat /etc/sysconfig/o2cb
#
# This is a configuration file for automatic startup of the O2CB
# driver. It is generated by running /etc/init.d/o2cb configure.
# Please use that method to modify this file
#
# O2CB_ENABELED: 'true' means to load the driver on boot.
O2CB_ENABLED=false
# O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start.
O2CB_BOOTCLUSTER=
# O2CB_HEARTBEAT_THRESHOLD: Iterations before a node is considered dead.
O2CB_HEARTBEAT_THRESHOLD=
Regards,
Andy
On 3/28/07, Sunil Mushran <Sunil.Mushran@oracle.com> wrote:
>
> He meant... cat /etc/sysconfig/o2cb
> If you are using novell's userspace hb, then it will be listed there.
>
> Andy Johnson wrote:
> > Hello,
> > NO such thing as /sys/o2cb/heartbeat_mode !
> > I tried :
> >
> > /etc/init.d/o2cb load
> > Loading module "configfs": OK
> > Mounting configfs filesystem at /sys/kernel/config: OK
> > Loading module "ocfs2_nodemanager": OK
> > Loading module "ocfs2_dlm": OK
> > Loading module "ocfs2_dlmfs": OK
> > Mounting ocfs2_dlmfs filesystem at /dlm: OK
> >
> > :/root# ls /sys/o2cb
> > interface_revision logmask
> > and
> >
> > ls /sys/o2cb/logmask
> > ls /sys/o2cb/logmask -al
> > total 0
> > drwxr-xr-x 2 root root 0 Mar 28 19:28 .
> > drwxr-xr-x 3 root root 0 Mar 28 19:26 ..
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 AIO
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 BH_IO
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 CONN
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DCACHE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DISK_ALLOC
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_DOMAIN
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLMFS
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_GLUE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_MASTER
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_RECOVERY
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_THREAD
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 ENTRY
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 ERROR
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXIT
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXPORT
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXTENT_MAP
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 FILE_IO
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 HB_BIO
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 HEARTBEAT
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 INODE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 JOURNAL
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 KTHREAD
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 MSG
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 NAMEI
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 NOTICE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 QUORUM
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 SOCKET
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 SUPER
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 TCP
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 UPTODATE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 VOTE
> >
> > and
> >
> > cat /sys/o2cb/logmask/HEARTBEAT
> > off
> > Regards,
> > Andy
> >
> >
> >
> > On 3/28/07, *Srinivas Eeda* < srinivas.eeda@oracle.com
> > <mailto:srinivas.eeda@oracle.com>> wrote:
> >
> > That might because you have configured user mode dlm. What does
> "|cat
> > /sys/o2cb/heartbeat_mode" show, "user"?. If so run, /etc/init.d/o2cb
> > configure and answer "n" for the following
> > ||Use user-space driven heartbeat? (y/n) [y] n
> >
> > thanks,
> > --Srini
> > ||
> >
> > |Andy Johnson wrote:
> > > Hello,
> > > I have ocfs2-tools-1.2.3. ( built from sources)
> > > I try:
> > > mount /dev/vg1/cluster /mnt/ocfs2/
> > > and get:
> > > ocfs2_hb_ctl: Unable to access cluster service while starting
> > heartbeat
> > > mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
> > > "Operation not permitted"
> > >
> > > What can be the cause of this error ? Any ideas?
> > >
> > > (I tried it after service heartbeat stop)
> > >
> > > Regards,
> > > Andy
> > >
> >
> ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > Ocfs2-devel mailing list
> > > Ocfs2-devel@oss.oracle.com <mailto:Ocfs2-devel@oss.oracle.com>
> > > http://oss.oracle.com/mailman/listinfo/ocfs2-devel
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Ocfs2-devel mailing list
> > Ocfs2-devel@oss.oracle.com
> > http://oss.oracle.com/mailman/listinfo/ocfs2-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-devel/attachments/20070328/ebe22e52/attachment-0001.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
2007-03-28 11:10 ` Andy Johnson
@ 2007-03-28 11:15 ` Sunil Mushran
2007-03-28 11:15 ` Jeff Mahoney
1 sibling, 0 replies; 10+ messages in thread
From: Sunil Mushran @ 2007-03-28 11:15 UTC (permalink / raw)
To: ocfs2-devel
That means your cluster service has not started. Refer to
the user's guide for more.
Andy Johnson wrote:
> *Sunil Mushran,
> Are you sure ?
>
> Before and **after**
> " service hearbeat start"
> I have the **same** results; heartbeat user space is not mentioned;
> This is on fedora core 6.
>
> here is what I get:
> *cat /etc/sysconfig/o2cb
> #
> # This is a configuration file for automatic startup of the O2CB
> # driver. It is generated by running /etc/init.d/o2cb configure.
> # Please use that method to modify this file
> #
>
> # O2CB_ENABELED: 'true' means to load the driver on boot.
> O2CB_ENABLED=false
>
> # O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start.
> O2CB_BOOTCLUSTER=
>
> # O2CB_HEARTBEAT_THRESHOLD: Iterations before a node is considered dead.
> O2CB_HEARTBEAT_THRESHOLD=
>
> Regards,
> Andy
>
>
> On 3/28/07, *Sunil Mushran* <Sunil.Mushran@oracle.com
> <mailto:Sunil.Mushran@oracle.com>> wrote:
>
> He meant... cat /etc/sysconfig/o2cb
> If you are using novell's userspace hb, then it will be listed there.
>
> Andy Johnson wrote:
> > Hello,
> > NO such thing as /sys/o2cb/heartbeat_mode !
> > I tried :
> >
> > /etc/init.d/o2cb load
> > Loading module "configfs": OK
> > Mounting configfs filesystem at /sys/kernel/config: OK
> > Loading module "ocfs2_nodemanager": OK
> > Loading module "ocfs2_dlm": OK
> > Loading module "ocfs2_dlmfs": OK
> > Mounting ocfs2_dlmfs filesystem at /dlm: OK
> >
> > :/root# ls /sys/o2cb
> > interface_revision logmask
> > and
> >
> > ls /sys/o2cb/logmask
> > ls /sys/o2cb/logmask -al
> > total 0
> > drwxr-xr-x 2 root root 0 Mar 28 19:28 .
> > drwxr-xr-x 3 root root 0 Mar 28 19:26 ..
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 AIO
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 BH_IO
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 CONN
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DCACHE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DISK_ALLOC
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_DOMAIN
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLMFS
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_GLUE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_MASTER
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_RECOVERY
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_THREAD
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 ENTRY
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 ERROR
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXIT
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXPORT
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXTENT_MAP
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 FILE_IO
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 HB_BIO
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 HEARTBEAT
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 INODE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 JOURNAL
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 KTHREAD
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 MSG
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 NAMEI
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 NOTICE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 QUORUM
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 SOCKET
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 SUPER
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 TCP
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 UPTODATE
> > -rw-r--r-- 1 root root 4096 Mar 28 19:28 VOTE
> >
> > and
> >
> > cat /sys/o2cb/logmask/HEARTBEAT
> > off
> > Regards,
> > Andy
> >
> >
> >
> > On 3/28/07, *Srinivas Eeda* < srinivas.eeda@oracle.com
> <mailto:srinivas.eeda@oracle.com>
> > <mailto:srinivas.eeda@oracle.com
> <mailto:srinivas.eeda@oracle.com> >> wrote:
> >
> > That might because you have configured user mode dlm. What
> does "|cat
> > /sys/o2cb/heartbeat_mode" show, "user"?. If so run,
> /etc/init.d/o2cb
> > configure and answer "n" for the following
> > ||Use user-space driven heartbeat? (y/n) [y] n
> >
> > thanks,
> > --Srini
> > ||
> >
> > |Andy Johnson wrote:
> > > Hello,
> > > I have ocfs2-tools-1.2.3 . ( built from sources)
> > > I try:
> > > mount /dev/vg1/cluster /mnt/ocfs2/
> > > and get:
> > > ocfs2_hb_ctl: Unable to access cluster service while starting
> > heartbeat
> > > mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
> > > "Operation not permitted"
> > >
> > > What can be the cause of this error ? Any ideas?
> > >
> > > (I tried it after service heartbeat stop)
> > >
> > > Regards,
> > > Andy
> > >
> >
> ------------------------------------------------------------------------
>
> > >
> > > _______________________________________________
> > > Ocfs2-devel mailing list
> > > Ocfs2-devel@oss.oracle.com
> <mailto:Ocfs2-devel@oss.oracle.com> <mailto:
> Ocfs2-devel@oss.oracle.com <mailto:Ocfs2-devel@oss.oracle.com>>
> > > http://oss.oracle.com/mailman/listinfo/ocfs2-devel
> >
> >
> >
> ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Ocfs2-devel mailing list
> > Ocfs2-devel@oss.oracle.com <mailto:Ocfs2-devel@oss.oracle.com>
> > http://oss.oracle.com/mailman/listinfo/ocfs2-devel
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Ocfs2-devel mailing list
> Ocfs2-devel@oss.oracle.com
> http://oss.oracle.com/mailman/listinfo/ocfs2-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat"
2007-03-28 11:10 ` Andy Johnson
2007-03-28 11:15 ` Sunil Mushran
@ 2007-03-28 11:15 ` Jeff Mahoney
1 sibling, 0 replies; 10+ messages in thread
From: Jeff Mahoney @ 2007-03-28 11:15 UTC (permalink / raw)
To: ocfs2-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Andy Johnson wrote:
> *Sunil Mushran,
> Are you sure ?
>
> Before and **after**
> " service hearbeat start"
> I have the **same** results; heartbeat user space is not mentioned; This
> is on fedora core 6.
>
> here is what I get:
> * **cat /etc/sysconfig/o2cb
> #
> # This is a configuration file for automatic startup of the O2CB
> # driver. It is generated by running /etc/init.d/o2cb configure.
> # Please use that method to modify this file
> #
>
> # O2CB_ENABELED: 'true' means to load the driver on boot.
> O2CB_ENABLED=false
>
> # O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start.
> O2CB_BOOTCLUSTER=
>
> # O2CB_HEARTBEAT_THRESHOLD: Iterations before a node is considered dead.
> O2CB_HEARTBEAT_THRESHOLD=
It looks like you haven't actually configured a cluster to use. The
command to configure a cluster is in the header of the file you pasted:
/etc/init.d/o2cb configure
- -Jeff
- --
Jeff Mahoney
SUSE Labs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFGCrDTLPWxlyuTD7IRAmFgAKCdtiooVVAgAokfb+gh7ifpG6iaRACfXE/1
kriNZ4yJAQhRVEocI6P/kGI=
=4HwK
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2007-03-28 11:15 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-03-28 8:28 [Ocfs2-devel] mount gnenerates an error : "Unable to access cluster service while starting heartbeat" Andy Johnson
2007-03-28 8:53 ` Jeff Mahoney
2007-03-28 9:23 ` Srinivas Eeda
2007-03-28 9:32 ` Sunil Mushran
2007-03-28 10:29 ` Andy Johnson
2007-03-28 10:31 ` Jeff Mahoney
2007-03-28 10:33 ` Sunil Mushran
2007-03-28 11:10 ` Andy Johnson
2007-03-28 11:15 ` Sunil Mushran
2007-03-28 11:15 ` Jeff Mahoney
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.