* [lm-sensors] ITE IT8718F Super IO Sensors
@ 2007-03-30 1:27 Aldo Caruso
2007-03-31 13:24 ` Jean Delvare
2007-03-31 14:00 ` Aldo Caruso
0 siblings, 2 replies; 3+ messages in thread
From: Aldo Caruso @ 2007-03-30 1:27 UTC (permalink / raw)
To: lm-sensors
Hi,
I'm running debian on a Penium IV with a P4M800PRO-M motherboard.
I run sensors-detect and this is the result :
//--------------------------------------------------------------
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus Via Pro adapter at 0400'
Busdriver `i2c-viapro', I2C address 0x50
Chip `eeprom' (confidence: 6)
EEPROMs are *NOT* sensors! They are data storage chips commonly
found on memory modules (SPD), in monitors (EDID), or in some
laptops, for example.
Driver `it87' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `ITE IT8718F Super IO Sensors' (confidence: 9)
I will now generate the commands needed to load the required modules.
Just press ENTER to continue:
To make the sensors modules behave correctly, add these lines to
/etc/modules:
#----cut here----
# I2C adapter drivers
i2c-viapro
# Chip drivers
eeprom
it87
#----cut here----
//--------------------------------------------------------------
I let the program add the former lines to /etc/modules, I reboot, I run
sensors and this is the result:
//--------------------------------------------------------------
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
//--------------------------------------------------------------
Doing lsmod I found all the above modules listed.
Thanks for any idea,
Aldo
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [lm-sensors] ITE IT8718F Super IO Sensors
2007-03-30 1:27 [lm-sensors] ITE IT8718F Super IO Sensors Aldo Caruso
@ 2007-03-31 13:24 ` Jean Delvare
2007-03-31 14:00 ` Aldo Caruso
1 sibling, 0 replies; 3+ messages in thread
From: Jean Delvare @ 2007-03-31 13:24 UTC (permalink / raw)
To: lm-sensors
Hi Aldo,
On Thu, 29 Mar 2007 22:27:30 -0300, Aldo Caruso wrote:
> Hi,
>
> I'm running debian on a Penium IV with a P4M800PRO-M motherboard.
> I run sensors-detect and this is the result :
>
> //--------------------------------------------------------------
> Now follows a summary of the probes I have just done.
> Just press ENTER to continue:
>
> Driver `eeprom' (should be inserted):
> Detects correctly:
> * Bus `SMBus Via Pro adapter at 0400'
> Busdriver `i2c-viapro', I2C address 0x50
> Chip `eeprom' (confidence: 6)
>
> EEPROMs are *NOT* sensors! They are data storage chips commonly
> found on memory modules (SPD), in monitors (EDID), or in some
> laptops, for example.
>
> Driver `it87' (should be inserted):
> Detects correctly:
> * ISA bus address 0x0290 (Busdriver `i2c-isa')
> Chip `ITE IT8718F Super IO Sensors' (confidence: 9)
>
> I will now generate the commands needed to load the required modules.
> Just press ENTER to continue:
>
> To make the sensors modules behave correctly, add these lines to
> /etc/modules:
>
> #----cut here----
> # I2C adapter drivers
> i2c-viapro
> # Chip drivers
> eeprom
> it87
> #----cut here----
> //--------------------------------------------------------------
>
> I let the program add the former lines to /etc/modules, I reboot, I run
> sensors and this is the result:
> //--------------------------------------------------------------
> No sensors found!
> Make sure you loaded all the kernel drivers you need.
> Try sensors-detect to find out which these are.
> //--------------------------------------------------------------
>
> Doing lsmod I found all the above modules listed.
Which kernel are you running? If you look at:
http://www.lm-sensors.org/wiki/Devices
you'll see that support for the ITE IT8718F is only available since
kernel 2.6.19.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] ITE IT8718F Super IO Sensors
2007-03-30 1:27 [lm-sensors] ITE IT8718F Super IO Sensors Aldo Caruso
2007-03-31 13:24 ` Jean Delvare
@ 2007-03-31 14:00 ` Aldo Caruso
1 sibling, 0 replies; 3+ messages in thread
From: Aldo Caruso @ 2007-03-31 14:00 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/html, Size: 2549 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-03-31 14:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-03-30 1:27 [lm-sensors] ITE IT8718F Super IO Sensors Aldo Caruso
2007-03-31 13:24 ` Jean Delvare
2007-03-31 14:00 ` Aldo Caruso
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.