* [LARTC] mark incoming traffic
@ 2007-04-02 12:02 Bgs
2007-04-02 13:21 ` Bgs
0 siblings, 1 reply; 2+ messages in thread
From: Bgs @ 2007-04-02 12:02 UTC (permalink / raw)
To: lartc
Greetings,
I'd like to mark incoming traffic based on TOS to use the mar for
backtraffic routing. I have two gateways on the same net and incoming
traffic may arrive from any of them. I want the return packets to go the
same way. My plan is:
Normal traffic goes through default gw. Traffic from the other has TOS
0x08 set. I'd like to mark traffic with TOS and use fwmark awith iproute
for outbound packets.
My problem is that I can mark based on an incoming property and I need
the mark on the outbound packets. How can I do this?
Doing "-A INPUT -p tcp -m tos --tos 0x08 -j MARK --set-mark 1" (in
mangle of course) is not good as the mark is lost. Doing tests with "-A
OUTPUT -p tcp -d test_client_ip -j MARK --set-mark 1" works ok.
Is there a solution?
Thanks in advance
Bgs
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] mark incoming traffic
2007-04-02 12:02 [LARTC] mark incoming traffic Bgs
@ 2007-04-02 13:21 ` Bgs
0 siblings, 0 replies; 2+ messages in thread
From: Bgs @ 2007-04-02 13:21 UTC (permalink / raw)
To: lartc
Never mind... got it... I will sit down myself :)
Bgs wrote:
>
> Greetings,
>
> I'd like to mark incoming traffic based on TOS to use the mar for
> backtraffic routing. I have two gateways on the same net and incoming
> traffic may arrive from any of them. I want the return packets to go the
> same way. My plan is:
>
> Normal traffic goes through default gw. Traffic from the other has TOS
> 0x08 set. I'd like to mark traffic with TOS and use fwmark awith iproute
> for outbound packets.
>
> My problem is that I can mark based on an incoming property and I need
> the mark on the outbound packets. How can I do this?
>
> Doing "-A INPUT -p tcp -m tos --tos 0x08 -j MARK --set-mark 1" (in
> mangle of course) is not good as the mark is lost. Doing tests with "-A
> OUTPUT -p tcp -d test_client_ip -j MARK --set-mark 1" works ok.
>
> Is there a solution?
>
> Thanks in advance
> Bgs
>
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-04-02 13:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-04-02 12:02 [LARTC] mark incoming traffic Bgs
2007-04-02 13:21 ` Bgs
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.