* [U-Boot-Users] FDT for dynamic U-Boot configuration, startup
@ 2007-04-18 14:19 Wolfgang Grandegger
0 siblings, 0 replies; only message in thread
From: Wolfgang Grandegger @ 2007-04-18 14:19 UTC (permalink / raw)
To: u-boot
Hello,
as already discussed, FDT is a good choice for dynamically configuring
U-Boot. I actually plan to use FDT to configure some devices of a
MPC823, namely PCMCIA, the LCD controller, CAN and the RTC. Are there
already some ideas on the related startup sequence and how to re-use the
FDT when booting Linux. I guess there will be a FDT address defined in
the config file, e.g. CFG_FDT_BASE and the FDT will then be read and
checked somewhere early in the init sequence (in lib_ppc/board.c).
Thanks for any input.
Wolfgang.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-04-18 14:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-04-18 14:19 [U-Boot-Users] FDT for dynamic U-Boot configuration, startup Wolfgang Grandegger
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.