From: "Krzysztof Helt" <krzysztof.h1@wp.pl>
To: linux-fbdev-devel <linux-fbdev-devel@lists.sourceforge.net>
Subject: [PATCH] pm2fb: accelerated fillrect and copyarea
Date: Mon, 30 Apr 2007 20:57:04 +0200 [thread overview]
Message-ID: <46363c001f8a0@wp.pl> (raw)
[-- Attachment #1: Type: text/plain, Size: 465 bytes --]
From: Krzysztof Helt <krzysztof.h1@wp.pl>
This is port of accelerated functions from 2.4 kernel. Only
fillrect and copyarea are accelerated. Fillrect is not
accelerated in 24-bit mode.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
---
This is patch against 2.6.21 kernel.
----------------------------------------------------
Sprawdź ile wart jest Twój samochód.
Wycena aut jak na dłoni: http://klik.wp.pl/?adr=www.wycenyaut.wp.pl&sid=1117
[-- Attachment #2: pm2fb-fillrect.diff --]
[-- Type: application/octet-stream, Size: 4261 bytes --]
--- linux-2.6.21.new/drivers/video/pm2fb.c 2007-04-29 21:01:48.079784118 +0200
+++ linux-2.6.21/drivers/video/pm2fb.c 2007-04-29 21:07:37.182526781 +0200
@@ -103,7 +103,7 @@ static struct fb_fix_screeninfo pm2fb_fi
.xpanstep = 1,
.ypanstep = 1,
.ywrapstep = 0,
- .accel = FB_ACCEL_NONE,
+ .accel = FB_ACCEL_3DLABS_PERMEDIA2,
};
/*
@@ -206,6 +206,17 @@ static inline void WAIT_FIFO(struct pm2f
}
#endif
+static void wait_pm2(struct pm2fb_par* par) {
+
+ WAIT_FIFO(par, 1);
+ pm2_WR(par, PM2R_SYNC, 0);
+ mb();
+ do {
+ while (pm2_RD(par, PM2R_OUT_FIFO_WORDS) == 0);
+ rmb();
+ } while (pm2_RD(par, PM2R_OUT_FIFO) != PM2TAG(PM2R_SYNC));
+}
+
/*
* partial products for the supported horizontal resolutions.
*/
@@ -1039,6 +1052,117 @@ static int pm2fb_blank(int blank_mode, s
return 0;
}
+/*
+ * block operation. copy=0: rectangle fill, copy=1: rectangle copy.
+ */
+static void pm2fb_block_op(struct pm2fb_par* par, int copy,
+ s32 xsrc, s32 ysrc,
+ s32 x, s32 y, s32 w, s32 h,
+ u32 color) {
+
+ if (!w || !h)
+ return;
+ WAIT_FIFO(par, 6);
+ pm2_WR(par, PM2R_CONFIG, PM2F_CONFIG_FB_WRITE_ENABLE |
+ PM2F_CONFIG_FB_READ_SOURCE_ENABLE);
+ pm2_WR(par, PM2R_FB_PIXEL_OFFSET, 0);
+ if (copy)
+ pm2_WR(par, PM2R_FB_SOURCE_DELTA,
+ ((ysrc-y) & 0xfff) << 16 | ((xsrc-x) & 0xfff));
+ else
+ pm2_WR(par, PM2R_FB_BLOCK_COLOR, color);
+ pm2_WR(par, PM2R_RECTANGLE_ORIGIN, (y << 16) | x);
+ pm2_WR(par, PM2R_RECTANGLE_SIZE, (h << 16) | w);
+ wmb();
+ pm2_WR(par, PM2R_RENDER,PM2F_RENDER_RECTANGLE |
+ (x<xsrc ? PM2F_INCREASE_X : 0) |
+ (y<ysrc ? PM2F_INCREASE_Y : 0) |
+ (copy ? 0 : PM2F_RENDER_FASTFILL));
+ wait_pm2(par);
+}
+
+static void pm2fb_fillrect (struct fb_info *info,
+ const struct fb_fillrect *region)
+{
+ struct pm2fb_par *par = info->par;
+ struct fb_fillrect modded;
+ int vxres, vyres;
+ u32 color = (info->fix.visual == FB_VISUAL_TRUECOLOR) ?
+ ((u32*)info->pseudo_palette)[region->color] : region->color;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return;
+ if ((info->flags & FBINFO_HWACCEL_DISABLED) ||
+ region->rop != ROP_COPY ) {
+ cfb_fillrect(info, region);
+ return;
+ }
+
+ vxres = info->var.xres_virtual;
+ vyres = info->var.yres_virtual;
+
+ memcpy(&modded, region, sizeof(struct fb_fillrect));
+
+ if(!modded.width || !modded.height ||
+ modded.dx >= vxres || modded.dy >= vyres)
+ return;
+
+ if(modded.dx + modded.width > vxres)
+ modded.width = vxres - modded.dx;
+ if(modded.dy + modded.height > vyres)
+ modded.height = vyres - modded.dy;
+
+ if(info->var.bits_per_pixel == 8)
+ color |= color << 8;
+ if(info->var.bits_per_pixel <= 16)
+ color |= color << 16;
+
+ if(info->var.bits_per_pixel != 24)
+ pm2fb_block_op(par, 0, 0, 0,
+ modded.dx, modded.dy,
+ modded.width, modded.height, color);
+ else
+ cfb_fillrect(info, region);
+}
+
+static void pm2fb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ struct pm2fb_par *par = info->par;
+ struct fb_copyarea modded;
+ u32 vxres, vyres;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return;
+ if (info->flags & FBINFO_HWACCEL_DISABLED) {
+ cfb_copyarea(info, area);
+ return;
+ }
+
+ memcpy(&modded, area, sizeof(struct fb_copyarea));
+
+ vxres = info->var.xres_virtual;
+ vyres = info->var.yres_virtual;
+
+ if(!modded.width || !modded.height ||
+ modded.sx >= vxres || modded.sy >= vyres ||
+ modded.dx >= vxres || modded.dy >= vyres)
+ return;
+
+ if(modded.sx + modded.width > vxres)
+ modded.width = vxres - modded.sx;
+ if(modded.dx + modded.width > vxres)
+ modded.width = vxres - modded.dx;
+ if(modded.sy + modded.height > vyres)
+ modded.height = vyres - modded.sy;
+ if(modded.dy + modded.height > vyres)
+ modded.height = vyres - modded.dy;
+
+ pm2fb_block_op(par, 1, modded.sx, modded.sy,
+ modded.dx, modded.dy,
+ modded.width, modded.height, 0);
+}
+
/* ------------ Hardware Independent Functions ------------ */
/*
@@ -1052,8 +1176,8 @@ static struct fb_ops pm2fb_ops = {
.fb_setcolreg = pm2fb_setcolreg,
.fb_blank = pm2fb_blank,
.fb_pan_display = pm2fb_pan_display,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
+ .fb_fillrect = pm2fb_fillrect,
+ .fb_copyarea = pm2fb_copyarea,
.fb_imageblit = cfb_imageblit,
};
[-- Attachment #3: Type: text/plain, Size: 286 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
[-- Attachment #4: Type: text/plain, Size: 182 bytes --]
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
next reply other threads:[~2007-04-30 18:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-30 18:57 Krzysztof Helt [this message]
2007-04-30 21:21 ` [PATCH] pm2fb: accelerated fillrect and copyarea Antonino A. Daplas
2007-05-01 10:11 ` [PATCH] pm2fb: accelerated fillrect andcopyarea Krzysztof Helt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46363c001f8a0@wp.pl \
--to=krzysztof.h1@wp.pl \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.